Jump to content
Model Cars Magazine Forum

Ira

Members
  • Posts

    7,265
  • Joined

  • Last visited

Everything posted by Ira

  1. INTERIOR INSTALLED! When I did my final fitting for the Interior and front Underbody, I found I needed to make a few alterations. The Underbody hung down too low in the back, so I bent it to fit in place. I found a new way to mount Interiors and other large parts... Here is the Interior in place. Minor modifications were needed to get a tight fit. Once I got the Interior with Underbody in place, I used Zap-A-Gap, Green Label CA Glue, and applied it with a toothpick. I did the area behind the seats first then I put a couple drops where the Underbody touched the body. I did this in 4 spots and the Interior with attached Underbody are both installed in minutes. I use the Formula 560 like a filler or putty. Using a toothpick I put Formula 560 in the gaps between the dashboard seams. It dries clear and makes the seam less visible. Here is the Front Underbody in place... More Coming...
  2. SPACE CHICKEN!!! Yeah, it definitely looks like a bird...
  3. Great Start Pat!
  4. Thanks so much Joe!
  5. TWO SCOOPS! I found 2 Scoops in two Polar Lights-Willy Wild kits. I trimmed off the Scoops Supercharger Mounts and then Sanded the Scoops bottoms flat. I cut out a rectangular piece of plastic to use as a base for the Scoops and glued it in place. Then I glued the Scoops on top of the base. Here is a photo of Raptor with the Scoops in place! More Coming...
  6. GREAT PROGRESS JASON! Real Nice Work...
  7. GREAT BUILDS TOM! Great Painting...
  8. GREAT PROGRESS ROB!
  9. GREAT PROGRESS JAMES! Real Nice Weathering...
  10. Ira

    Stinger

    Real Nice Build Bobby! Very Clean...
  11. BEAUTIFUL BUILD!
  12. Thanks Clay! Glad you like it...
  13. Ira

    NOVA GS

    GREAT PROGRESS JAMES! Real Nice Engine...
  14. I don't know about sardines, but I think the best way to come up with new designs is to spend a lot of time researching Sci Fi & Automotive Subjects, and Build a lot of Models...
  15. Thanks for the kind words Dominik! Glad you like the Team...
  16. Thanks Larry! More Coming Soon...
  17. GREAT PROGRESS JOE!
  18. LOOKS GREAT BERNARD! Very Clean Build...
  19. CUT IT OFF! I decided to cut off this part of the Head. I removed it with a Cut-Off Wheel in a Dremel Tool. Then I sanded it smooth with a Sanding Board and cut out the hole so it was symmetric. Next I cut a piece of plastic to fill the hole. First I bent the plastic piece to match the curve of the head and then glued it in place... More Coming...
  20. Thanks Lee! That's Wild! I googled Judas Priest and they do look similar....
×
×
  • Create New...