Lownslow

Custom pedals one tribal the other is flames

Some stuff ive been working on since getting the laser to finally cut just enough so they pop off.

got the cards to cut through

got the laser cutting consistently now

Works on old schools with white letter tires but modern cars not so much

Gatekeeping the younger modelers because they used technology is diabolical work, then people wonder why kids on social media that build models avoid the older crowds

its modified from the good year artwork then adjusted for scale, itll do small lettering if i slow it down but that also causes the material to burn or melt so i had to make due with middle of the road for now, All the artwork was done through the software i use which is Lightburn a third party laser program, most lasers come with their own software but i wanted something universal so i spent the 200+ to get it. 50k is fast but you have to keep in mind that with this style engraving, speed and power=heat so you have to really know your materials otherwise it will catch on fire, too fast you loose details, too slow it will catch fire or melt the material

got the body completely painted now for final assembly and decals.

Yeah thats what i went for i wanted the letters to stay smooth like on my 1:1 tires and most of the sidewall is textured thats a lot harder to do on scale vinyl and rubber but i think i nailed the attempt on these. i wanna say i shaved roughly .0005 of the tires surface at the laser speed i set it at which for my machine was around 50000mms

Smoke and smell, even with a decent exhaust system.

Theres a few products on the market now the most user friendly is Gweike, the process was simple low power/fast speed i cant say exactly because no two tires engrave the same like soft foose tires dont engrave well at all even at the lowest settings. this is the lowest cost machine i found that should do the job https://www.gweikecloud.com/products/g2-fiber-laser-marking-machine?gad_source=1&gad_campaignid=20510607347&gbraid=0AAAAABdYeuo0gD57OuLpMAvIO3IY3zyvv&gclid=Cj0KCQjwuKnGBhD5ARIsAD19RsZwCSzwxr87tzBNPor0HBxjgi1dZVGZhNbco75QhXfgqpdOVVSnpygaAl8OEALw_wcB

i want a bigger wing so im ditching the verticals for some lincoln inspired ones

Designed a custom skylight, it will have a clear insert but wanted a shape to flex the ability to

I made a cowl hood file for it so chances are thats what you may have recently seen