rhs856

Meh, you have a few more shopping days.

1968 Buick Riviera GS 1957 Chevrolet Bel Air 1972 Olsmobile Vista Cruiser 2013 Holden Ute SS V Z-Series 1992 GMC Typhoon Current vehicle: 2002 Chevrolet Blazer ZR2

Here you go, Doodlers.

Here's more info on the Ute "rumored" to be coming to the U.S. Say what you will about the styling, I'll be in line for one with a 5.7L.

I saw the picture of the wheel stand and wanted so badly for it to be a diorama - but then I saw the tire wrinkle! Nice work on the truck.

Where in the world did that loaded luggage rack come from?

This kit isn't too bad. It's a little tight, but take your time and don't force things and you should be fine. Also, wait until the body is on to put on exterior parts.

Agreed, although their tree outlines don't show the same amount of flash as some of the reissues have.

Even if it was $32 instead of 32 pounds, it's a huge chunk to pay for an unpainted, unassembled 1/24 figure. Not to say I wouldn't get this if I could afford it.

I couldn't agree more! I had no idea that there were so many different 1:1 options. I didn't ask the original question expecting this kind of conversation, but I am glad that it's happening. Thanks to all the contributors!

Thanks for the pics. It appears that I will be learning more about suspension than ever during this build. And thanks for pointing out the need to lengthen the frame - I'm one step ahead of you! That reminds me... I have an old Ford truck glue bomb somewhere. I kinda like the look of that.

I'm starting the AMT 1925 Model T (dropped frame, coupe body, Parts Pack Chevy 283 with the crank driven supercharger) and I'm not sure I like the look of the front suspension parts. Has anyone either made their own realistic front end or put on another front end from a different kit with any success?

You bring up an excellent point.

I've heard freezing the model for 20 min will allow you to snap parts free sometimes. Any idea what kind of glue it is?

Update on the Supply Trading Vehicle - I'm nearing the final stretch! The truck itself is nearly complete, all that's left is to make/paint the remaining "supplies". I just finished the generator, which I based on a Briggs and Stratton. It was made with sheet and rod styrene, some aluminum tubing, and a little wire for the pull cord. Here it is before the paint... And after. This is where the truck is at this point. I just need to add on some trim pieces and it should be done. No glass in this one - the Trader loves the hot apocalyptic breeze blowing through his hair!

Nice job! I love that blue. It's always hard for me to believe that something this sleek came out of the fifties. P.S. Is it just me, or does this car look a little like a mustachioed shark?

Here's a mock up of the supply truck for an update. I got a lot of painting and weathering done (didn't get to the shiny things in the photo, yet!), and I'm still in the process of building the generator and wiring everything. The grip in the center of the dash is for controlling the minigun, as the opening next to the driver will be covered with mesh fence or something similar. Having tons of fun! It's hard to believe how much work it takes to make something look rusty and dirty. It sure is more forgiving than trying to make something shiny and clean, however! Thanks for looking.

one of my favorite kits. you did a beautiful job.

Here's the latest. My wife picked the color and rubbed off the salt. I had to reassure her that me making it rustier was not diminishing her hard work! This old beast sure is taking on some character! The combination of the tweaked hood and dented in headlights definitely give it an expression.

Love the exhaust, and I vote no on a plate.

I want an exhaust that sounds like Sam Kinison. OH OH OHHHHHHHH!!!!

Romell, I have seen you post in the past about wanting one of these and finally finding one. How great it is that this model is going to find new life in the hands of a very talented builder. Thanks for letting us follow along with you in this journey.

I'm just getting back into my build - summer has been crazy! I'm building a trading vehicle, so the main area I've been spending time on is the stuff that will be in the back. So far I have a reciprocating saw and 50' extension cord, and an air compressor (awaiting air lines and wire). These are all scratch built from styrene (sheet and rod), aluminum tubing, and wire from a Dewalt saw and my own Campbell Hausfield air compressor. Up next will be a Briggs and Stratton generator, a couple of shovels and rakes (for dead zombie cleanup!) and I have a couple of sets of hand tools from kits to paint. Oh, and I should probably start painting the truck, too - or I'll have a pile of stuff but nothing to haul it in! Enjoy!

For those of you who have teenagers in your life (or those who ARE the teenager in your life), you have probably seen countless pairs of headphones get used and abused. At the high school where I teach, broken headphones are a daily "emergency" and I have some students who go through a couple pair a month! Anywho, after finding pieces and parts on my floor, I noticed that there was some interesting colored wire inside the headphones. I started passing the word around that kids with DOA headphones should bring them my way. Top left is your typical pair of Apple earbuds. These are what I get most of my wiring. Most come with a gold colored wire in each side paired with either a red or a blue wire. Different headphones come with different colors - green, grey, black, even that red/green combo that's just crying out to be put in a Christmas themed car! You can also scavenge other parts, like screen (shown) and magnets. You'd be surprised what's inside these things. Just let your kids/grand kids/friends know that you are their new Earbud Recycling Facility!

I tried doing this once. Let's just say I wasted a lot of time and a roll of tape. Jim has it right, just buy the tape you need.