Jump to content
Model Cars Magazine Forum

Tom Daniel's '60 Chevy "Street Figher" finished! *a few outdoor pictures added 8/15*


Recommended Posts

Posted (edited)

Was too late to take any outdoor pics but here it is! Let me know what you think. Thanks!

Tamiya Orange w/ Clear. Light 5000 grit wetsand and buff with Wizards polish

I used older issue monogram tires w/ the proper lettering on them

BMF'd the front window trim, and all side/rear trim

Orange flocking for carpet in front interior cabin floor

Filled in the out of place looking gas door since the cylinders in the back are the fuel tanks

Black washed the panel lines and quarter scoops (my first time)

Molded in the front and rear valences for a cleaner look. 

Used BMF behind the rear clear taillight for a reflective look instead of looking straight into the body. 

Painted under the flip nose flat black. 

M.A.D distributor and went with a classic 80's Accel tan cap and yellow wires look. 

 

Turned out pretty good I think.

20160810_225100_zpsoc0t3fs3.jpg

20160810_225118_zpszb3brrya.jpg

20160810_225150_zpsdh1ribas.jpg

20160810_225219_zpsy9klfsoq.jpg

20160810_225231_zps8ln76h5c.jpg

20160810_225242_zpstlfodz8f.jpg

20160810_225252_zpsfamxhmsm.jpg

20160810_225307_zpss8uar0cw.jpg

20160810_225313_zpsjqzm4mbc.jpg

20160810_225324_zpslldpy9lz.jpg

20160810_225328_zpstfcx415j.jpg

20160810_225335_zpsc5zjztgi.jpg

20160810_225352_zpsjoledtam.jpg

20160810_225414_zpsh5nydlce.jpg

20160810_225546_zpsrau4qt8r.jpg

20160810_225600_zpsjhwshqwo.jpg

20160810_225705_zps3g21jy2z.jpg

20160810_225727_zpsuz3ewr5i.jpg

Edited by JTalmage
Posted

beautiful!

love your molded-in bodywork.

remember, tom's backstory is that the car is 'glass, on a tube frame.

you made it look even more like a fiberglass body!

now, somewhere around here I have a Quicksilver....................

Posted

That's just wicked-looking! Love the paint! What brand/color did you use?

Thanks, I just did a quick ninja edit because I realized I forgot all of the info on it lol but it's just tamiya orange with tamiya clear. I think it would have looked good with a pearl clear though. 

beautiful!

love your molded-in bodywork.

remember, tom's backstory is that the car is 'glass, on a tube frame.

you made it look even more like a fiberglass body!

now, somewhere around here I have a Quicksilver....................

I didn't know it was mean to be a fiberglass body thanks for the info. That makes perfect sense. 

Posted

You should post those pics on TD's Facebook page. He likes  seeing build-ups of the models he designed and usually takes the time to comment on them.

Did that last night actually. Just shared one picture. I didn't want to bombard him with like 20 pics hahaha but I did also thank him for his contributions to the hobby and his wonderful designs.

Posted

Fantastic job on this kit!  Q: did you have any issues during the build? -I have this kit also, so I was curious.

I had a few hiccupa. The steering parts are fiddly and hard to place. My chassis was warped so it sits funny. And the hood tilt hinges are a real bear to install if you blended the valances in. Superglue is your friend in that case. I also had to slightly open up the holes in the wheels for them to go on after paint. Tilt nose doesn't quite line up with the body when shut but goes with a little force. Might help to also round off the bottom edges of the core support too which would help when the hood is flipped up.

Posted

Here's a few outdoor shots. Just got my new phone so still trying to get used to it. Unfortunately it was a little overcast as well.

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...