mr68gts Posted March 25, 2021 Author Posted March 25, 2021 Thanks guys! So I decided to cut the mid plate out. I did this one in plastic but will cut the final one in aluminum. It is actually sitting on the bellhousing dowels in the block! So with all this hard work, I had to mock it up in the chassis to see how it looks. Well....BLAH_BLAH_BLAH_BLAH...... Color me motivated now! ?
Codi Posted March 27, 2021 Posted March 27, 2021 - All the time was well worth it Paul. The engine is spectacular. cheers, tim
comp1839 Posted March 28, 2021 Posted March 28, 2021 looks like you're getting that uv printer dialed in really well Paul. your parts are just fantastic looking!!! keep up the excellent work!!!
mr68gts Posted April 4, 2021 Author Posted April 4, 2021 On 3/27/2021 at 2:51 AM, Codi said: - All the time was well worth it Paul. The engine is spectacular. cheers, tim Thanks Tim, It's getting there and I am glad I have gone back in a reworked much of it! It's severely pushed the project back however. I got involved with a little detail contest online where it was just a section (engine or interior) so it's pushed me to get it done. On 3/28/2021 at 9:54 AM, comp1839 said: looks like you're getting that uv printer dialed in really well Paul. your parts are just fantastic looking!!! keep up the excellent work!!! Thanks Dave, I still have some issues on occasion, especially when changing types of resin. Printing in the trailer has also added to the difficulties of it all as it is not easy to print where we are now! (dirt lot and the printer is in the basement lol) I did have it at work for a while but printing at work had it challenges too! Like if there is an issue I can't easily correct it since the computer is here at home. Also, I appreciate all the help you have given me with this project! Much of it couldn't happen without your assistance! Paul
mr68gts Posted June 26, 2021 Author Posted June 26, 2021 Haven't touched this in a while but this is where I'm at now. Probably going to wait for house to be finished to continue on. Its too difficult to build something this complicated in the trailer! (41' fifth wheel)
Tortuga Kustomz Posted June 29, 2021 Posted June 29, 2021 Waw this is turning really good bro, love the blower
mr68gts Posted September 5, 2021 Author Posted September 5, 2021 Working on a new body. Eff the tdr un accurate body! 1
NYLIBUD Posted September 7, 2021 Posted September 7, 2021 When we gonna hear this thing fire up already?LOl,no seriously great job so far.
Codi Posted September 9, 2021 Posted September 9, 2021 I really like the rendering Paul. The rear wing adds something extra to it. cheers, tim
mr68gts Posted September 11, 2021 Author Posted September 11, 2021 Slowly getting there! At 1:1 scale currently! Orange line in the rear view is the 1/4 panel at the middle of the rear tire. On 9/9/2021 at 9:49 AM, Codi said: I really like the rendering Paul. The rear wing adds something extra to it. cheers, tim Tim, thanks. Not going to use that wing though. Rendering pulled from the internet and sized 1:1 scale from some minor dimensions.
comp1839 Posted September 11, 2021 Posted September 11, 2021 major undertaking the Paul. while i'm sure you're totally capable...i'll wish you luck anyway!!! can't wait to see it!!!!
MeatMan Posted September 14, 2021 Posted September 14, 2021 Fantastic project! That mill is beautiful!
mr68gts Posted September 16, 2021 Author Posted September 16, 2021 On 9/11/2021 at 1:00 PM, comp1839 said: major undertaking the Paul. while i'm sure you're totally capable...i'll wish you luck anyway!!! can't wait to see it!!!! Thanks Dave! I'm going to need all the luck I can get haha! Major undertaking is putting it mildly! I am learning surfacing as I go which is making it difficult to get the required results.
mr68gts Posted September 16, 2021 Author Posted September 16, 2021 On 9/15/2021 at 4:15 AM, Zippi said: Progress is looking pretty good. Thanks Zippi
matad311 Posted May 16, 2022 Posted May 16, 2022 Paul, the injector and spacer came out really good! Glad to help out with that. Been a year since my last check in but still following along with this!
mr68gts Posted May 20, 2022 Author Posted May 20, 2022 I've redone the whole engine since last being in here and this is how it sits so far. I'm waiting on hardware to show up from Australia then I can continue on.
comp1839 Posted May 21, 2022 Posted May 21, 2022 would it be wrong for me to say, this is down right sexy?
mr68gts Posted November 12, 2022 Author Posted November 12, 2022 Working on the rear end, I've gotten it pretty well straightened out and am now working on the 4 link bars at this time. RB Motion doesn't make the Heim joints in the size I need so I am making machining my own! Hypodermic tubing will be here Monday and all I've got left to do is machine the rotors and the remaining hardware. I also need to machine the tube adapters for the 4 link bars. Hopefully by end of next week I can start 1
comp1839 Posted November 12, 2022 Posted November 12, 2022 Paul, did you call Robert at RB? they were making them with the tubing adapters but, they weren't listed on his page.
mr68gts Posted November 13, 2022 Author Posted November 13, 2022 1 hour ago, comp1839 said: Paul, did you call Robert at RB? they were making them with the tubing adapters but, they weren't listed on his page. I did not call Robert. honestly didn't even dawn on me to call him lol. I ended up ordering 2 ft long pieces of SS hypodermic tubing which will be here Monday so I'm deep in it lol. Still have 2 more to profile then I can mill and drill them. Then onto the nuts...... Jeesh when does it end lol.
comp1839 Posted November 13, 2022 Posted November 13, 2022 looking great Paul!!!! you are an amazing talent my friend!!!!!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now