Jump to content
Model Cars Magazine Forum

Recommended Posts

Posted

I have these 2 spews that have a few parts on them that I have no idea what they are for. Any ideas. A bumper. Radiator temp gauge. 1 spinner for a wheel. 2 tail lights. These all look to belong to some build of a 1920 or 1930's car? 

parts1.jpeg

parts2.jpeg

Posted

Flip the sprues over and see if there are any numbers on the large tabs. Usually, it will be the manufacturer's kit number and you can google it to get a result.

Posted (edited)

Looks like  Parts for a Model  A ford . AMT kit  or maybe Monogram . my guess is AMT. The 1st pic  the parts are rear tail lamps. The 2nd pic is the front bumper and the motor meter for the Rad.

Edited by GMCMAN52
Posted
38 minutes ago, Casey said:

mono29.thumb.jpg.388e53bb0449c2a5473d3416bf450c9f.jpg

That's my guess as well Casey, either this or the 30 Woody. I believe the chrome trees are very similar for these kits and the Woody has been out in the modern white plastic era.

Posted (edited)
3 hours ago, ewetwo said:

I have these 2 spews ...

:D Sprues. 

I'm not being mean. I've seen "spruce" too, and some other interesting takes on the word. :D

Edited by Ace-Garageguy
Posted

The bumper and tail lights look to be an early Ford from the late '20s to the '30s. Those and the Motor Minder Radiator cap and one spinner is about all you have here.

Posted
2 hours ago, SfanGoch said:

Flip the sprues over and see if there are any numbers on the large tabs. Usually, it will be the manufacturer's kit number and you can google it to get a result.

I did a number search and it came up nothing. :-)

Posted (edited)
44 minutes ago, Ace-Garageguy said:

:D Sprues. 

I'm not being mean. I've seen "spruce" too, and some other interesting takes on the word. :D

LOL. I don't know which one is right as I've seen it spelled so many different ways. So it' Sprue and Sprues? Most likely spellcheck.  :-)

Edited by ewetwo
Posted (edited)
6 minutes ago, ewetwo said:

LOL. I don't know which one is right as I've seen it spelled so many different ways. So it' Sprue and Sprues? :-)

:D Yes sir.  Here's a dictionary entry:

sprue    /spruː/

noun
1.a vertical channel in a mold through which plastic or molten metal is introduced or out of which it flows when the mold is filled
2.plastic or metal that solidifies in a sprue
 
A lot of people call 'em "parts trees" too, which is also an accepted term.  :D
 
Edited by Ace-Garageguy
Posted
18 minutes ago, ewetwo said:

I did a number search and it came up nothing. :-)

What's the number? Let me try. I'm pretty good at finding obscure stuff on the Dub-Dub-Dub.

Posted
14 hours ago, SfanGoch said:

What's the number? Let me try. I'm pretty good at finding obscure stuff on the Dub-Dub-Dub.

The number is 27500609. :-)

 

Posted

The parts are from the Monogram kit Casey posted. In the future, all you need to do is take the first four digits and preface them with "AMT", Revell" etc. It took less than ten seconds to get the result.

Posted
15 hours ago, Ace-Garageguy said:

:D Yes sir.  Here's a dictionary entry:

sprue    /spruː/

noun
1.a vertical channel in a mold through which plastic or molten metal is introduced or out of which it flows when the mold is filled
2.plastic or metal that solidifies in a sprue
 
A lot of people call 'em "parts trees" too, which is also an accepted term.  :D
 

I've seen some so thick and blobby that "sprew" might be better. :lol:

Posted
34 minutes ago, SfanGoch said:

The parts are from the Monogram kit Casey posted. In the future, all you need to do is take the first four digits and preface them with "AMT", Revell" etc. It took less than ten seconds to get the result.

Awesome. I'll remember that. :-)

Posted
19 hours ago, ewetwo said:

Well if anyone need them, There they are. 

My suggestion- separate the parts (carefully, leave a tiny bit of sprue intact) from the runners, then bag and label them with the kit number and a description (1/24 Monogram '29 Model A Pickup), and save them. This kit (and its multiple variants) is very common, but the parts you keep may help someone one day.

Posted (edited)
20 hours ago, Casey said:

My suggestion- separate the parts (carefully, leave a tiny bit of sprue intact) from the runners, then bag and label them with the kit number and a description (1/24 Monogram '29 Model A Pickup), and save them. This kit (and its multiple variants) is very common, but the parts you keep may help someone one day.

Thank you Casey, I got to thinking and checked out my Ford models from that time period and I think it might go to this 1929 Ford Model A kit in the pic. I bought 3 of these Ford kits from a garage sale and they all had some work already done. 2 kits had the bodies already painted and the Vicky is chopped and primed.  I just finished one from the group. It's "under glass" . That kit had a few extra engines and such which I will post here to see if anyone can identify them. I know one is a flat head V8 I painted and put together. The other 2 I haven't a clue.

ford1.jpeg

Edited by ewetwo
Forgot to include the picture. LOL

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...