DiscoRover007 Posted June 22, 2018 Share Posted June 22, 2018 Hey guys I was just curious if anyone had a spray paint they like to use when they paint engines and trannys? My typical approach is to use tamiya primer and then airbrush model master aluminum metalizer. It has just the right grain for cast finish. However sometimes it would be nice to have a lazier route and mayber use a spray can. I've tried tamiya silver leaf but it appears too bright. Gloss aluminum might work if sprayed in light coats and then dry brushed with an acrylic and some weathering. But I was curious if there was an option anyone here uses? Thanks Quote Link to comment Share on other sites More sharing options...
Miatatom Posted June 22, 2018 Share Posted June 22, 2018 Model Master makes several metalizer colors in spray cans. Quote Link to comment Share on other sites More sharing options...
PARTSMARTY Posted June 22, 2018 Share Posted June 22, 2018 7 hours ago, Miatatom said: Model Master makes several metalizer colors in spray cans. X2 Quote Link to comment Share on other sites More sharing options...
espo Posted June 22, 2018 Share Posted June 22, 2018 Tamiya also offers XF-16 Flat Aluminum. I use the brush method but I think that it would be easy enough to thin and spray also. Quote Link to comment Share on other sites More sharing options...
Ace-Garageguy Posted June 22, 2018 Share Posted June 22, 2018 It's good to remember that different engines and gearboxes, made with different materials using different methods during different time periods have many different surface finishes. For instance, sand-cast iron that blocks and earlier gearbox housings were made from have the characteristic slightly rough finish. Sand-cast aluminium can also be likewise rough, but many aluminum automatic gearbox housings have quite a smooth finish, like die-cast parts (carburetors and late model manual gearboxes and engine parts also). Anything fabricated from tubing will have a smooth finish, as well as pulleys and brackets. I've seen lotsa models spoiled when everything under the hood looks like cast iron. Study photos of the REAL version of what you're modeling to determine what degree of surface roughness is appropriate (assuming you want reasonable accuracy). As far as Testors "metalizers" go, you can get various surface effects...from dead smooth and looking like machined parts, to rough and pebbly looking like sand-cast...simply by varying your spray technique. Quote Link to comment Share on other sites More sharing options...
gtx6970 Posted June 22, 2018 Share Posted June 22, 2018 15 minutes ago, Ace-Garageguy said: It's good to remember that different engines and gearboxes, made with different materials using different methods during different time periods have many different surface finishes. For instance, sand-cast iron that blocks and earlier gearbox housings were made from have the characteristic slightly rough finish. Sand-cast aluminium can also be likewise rough, but many aluminum automatic gearbox housings have quite a smooth finish, like die-cast parts (carburetors and late model manual gearboxes and engine parts also). Anything fabricated from tubing will have a smooth finish, as well as pulleys and brackets. I've seen lotsa models spoiled when everything under the hood looks like cast iron. Study photos of the REAL version of what you're modeling to determine what degree of surface roughness is appropriate (assuming you want reasonable accuracy). As far as Testors "metalizers" go, you can get various surface effects...from dead smooth and looking like machined parts, to rough and pebbly looking like sand-cast...simply by varying your spray technique. Agreed on all points Especially spraying metalizers at various distances to achieve different results. For auto trans , I like to spray them with dull aluminum then while still wet take the bristles of a dry brush then poke them to get a rougher finish. keep in mind, I don't do contest so 1000 % dead nuts accuracy ( especially on something I cant see when looking in my display case ) MY goal is reasonable accuracy within a reasonable effort Quote Link to comment Share on other sites More sharing options...
DiscoRover007 Posted June 22, 2018 Author Share Posted June 22, 2018 Thing is with the spray can metalizers is that they are only buffing types. They are meant to be polished and shine. They come out a lot better when airbrushed in my opinion. Quote Link to comment Share on other sites More sharing options...
Muncie Posted June 22, 2018 Share Posted June 22, 2018 Krylon Dull Aluminum in the large cans is a good go-to for a basic cast aluminum finish. Sometimes difficult to find but worth it. Some Ace Hardware stores have it. As has been said, there are different levels of brightness ands gloss in an engine compartment but this is a good place to start. Dull Aluminum also makes a good base coat for metallizers and other metallic finishes. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.