THORDOOR220 Posted October 21, 2018 Share Posted October 21, 2018 (edited) This is going to be a fun little build. It's AMT's phase III camaro. It'll be dark blue with silver stripes, the baldwin motion body kit, and I'm thinking I'll fuel inject the 454. Maybe supercharge it, too. We'll see. Got these wheels at a local hobby shop for another model, but it turns out that the other model is 1/24 scale and too big for these, but they'll work well here. Also have drilled disc brakes for all corners as well. Probably going to have factory interior otherwise. Keep it looking simple and old school with a slight modern touch. Sorry for the dark picture. As always, comments/suggestions are welcome. Edited November 5, 2018 by THORDOOR220 Quote Link to comment Share on other sites More sharing options...
DPNM Posted October 21, 2018 Share Posted October 21, 2018 Nice start. My favorite gen Camaro. Does this help? Quote Link to comment Share on other sites More sharing options...
THORDOOR220 Posted October 23, 2018 Author Share Posted October 23, 2018 On 10/21/2018 at 3:43 PM, DPNM said: Does this help? Yes, that does. Thank you Quote Link to comment Share on other sites More sharing options...
THORDOOR220 Posted November 5, 2018 Author Share Posted November 5, 2018 Found a little time to work on this today. Working on a tubular front end and the front suspension. I wanted working suspension, and so far so good. Need to replicate on the other side, and make a spindle yet. The kit one is there just for temporary mock up. Also, mind the pliers, they were used to push the spring down so the spindle stayed in place. Quote Link to comment Share on other sites More sharing options...
66belair Posted November 5, 2018 Share Posted November 5, 2018 I started 2 of those kits years ago but never finished. They are nice kits. the wheels will definitely look good on that ride. Quote Link to comment Share on other sites More sharing options...
THORDOOR220 Posted November 6, 2018 Author Share Posted November 6, 2018 1 hour ago, 66belair said: The wheels will definitely look good on that ride. I hope so. They're a little smaller diameter than I'd like, but it looks as though I might already have to modify the front tubs (is that the right word? I'm not thinking so) to make it sit as low as I want. Assuming my suspension setup allows it. Why didn't you finish? Quote Link to comment Share on other sites More sharing options...
tkzwolf Posted November 6, 2018 Share Posted November 6, 2018 That suspension is impressive. Quote Link to comment Share on other sites More sharing options...
THORDOOR220 Posted November 8, 2018 Author Share Posted November 8, 2018 On 11/5/2018 at 8:15 PM, tkzwolf said: That suspension is impressive. Thank you. It's going to take a little more work to get it where I want it, but I'll get it there. Still need to figure out how to get more precise with the rods that the parts pivot on though, I have photoetched nuts, bolt heads, and washers I'd like to use on those for a little added realism. Overkill, no doubt, but should be cool. Quote Link to comment Share on other sites More sharing options...
THORDOOR220 Posted November 19, 2018 Author Share Posted November 19, 2018 (edited) Finally found some time for this. I made the other lower control arm, and remade the upper. The other side upper was giving me issues, so I took a break and moved to interior. Looking at other cars online, I decided to go with custom interior for this. Custom dash and console, no backseat, couple subs, roll bar, and I've got some seats on the way. Here's where I'm at. Still rough, but getting there. Also cut the doors off the car, I'll have to hinge those. As always, comments/questions are welcome. Edited November 19, 2018 by THORDOOR220 Quote Link to comment Share on other sites More sharing options...
THORDOOR220 Posted November 27, 2018 Author Share Posted November 27, 2018 Finished one side of the front, just need to finish replicating it on the other side and then on to the rear. Needs paint, obviously. And no, my shock mounts aren’t ‘correct’, but they work don’t they? Quote Link to comment Share on other sites More sharing options...
Metalmad Posted November 28, 2018 Share Posted November 28, 2018 Love what you are doing with this Camaro ! Quote Link to comment Share on other sites More sharing options...
Dann Tier Posted November 28, 2018 Share Posted November 28, 2018 My favorite Camaro!.....you are doing GREAT!! Quote Link to comment Share on other sites More sharing options...
THORDOOR220 Posted November 29, 2018 Author Share Posted November 29, 2018 Thanks guys, it's my favorite too (although I'm a ford guy, believe it or not, so I suppose I would be a bit picky about camaros wouldn't I?). Just got my parts from shapeways, so going to do a little bit of work with the motor tonight. Still need some pe stuff though. It's slow going, but should be pretty cool when it's done Quote Link to comment Share on other sites More sharing options...
Dann Tier Posted November 29, 2018 Share Posted November 29, 2018 7 hours ago, THORDOOR220 said: Thanks guys, it's my favorite too (although I'm a ford guy, believe it or not, so I suppose I would be a bit picky about camaros wouldn't I?). Just got my parts from shapeways, so going to do a little bit of work with the motor tonight. Still need some pe stuff though. It's slow going, but should be pretty cool when it's done Cant wait to see more!!! Quote Link to comment Share on other sites More sharing options...
THORDOOR220 Posted December 1, 2018 Author Share Posted December 1, 2018 I'm not sure how much time I'll have for modeling for a little while. Got in a car accident this morning, totaled my Saleen. I'll get to modeling when I can, but I need to find a another car first. Quote Link to comment Share on other sites More sharing options...
Dann Tier Posted December 2, 2018 Share Posted December 2, 2018 20 hours ago, THORDOOR220 said: I'm not sure how much time I'll have for modeling for a little while. Got in a car accident this morning, totaled my Saleen. I'll get to modeling when I can, but I need to find a another car first. Hope you're okay!, I will be patiently waiting for your return... Quote Link to comment Share on other sites More sharing options...
THORDOOR220 Posted December 2, 2018 Author Share Posted December 2, 2018 Thanks. Nobody got hurt, thank God Quote Link to comment Share on other sites More sharing options...
Dann Tier Posted December 3, 2018 Share Posted December 3, 2018 6 hours ago, THORDOOR220 said: Thanks. Nobody got hurt, thank God He was definitely looking out for you!!!...….you have too many models left to build!!! Quote Link to comment Share on other sites More sharing options...
THORDOOR220 Posted December 5, 2018 Author Share Posted December 5, 2018 On 12/2/2018 at 5:42 PM, Dann Tier said: He was definitely looking out for you!!!...….you have too many models left to build!!! Ain’t that the truth! Quote Link to comment Share on other sites More sharing options...
MeatMan Posted December 5, 2018 Share Posted December 5, 2018 (edited) Awesome fab work! Glad you're okay. Hope you can find a worthy replacement for your Stang. Edited December 5, 2018 by MeatMan Quote Link to comment Share on other sites More sharing options...
Slotto Posted December 5, 2018 Share Posted December 5, 2018 Looking good. Nice job on the front suspension Quote Link to comment Share on other sites More sharing options...
THORDOOR220 Posted December 10, 2018 Author Share Posted December 10, 2018 Thanks guys. Bought a 2002 GT convertible yesterday, swapping over all the saleen stuff. Should be cool, just work. As far as the model goes, I’ve had some time today. Little engine work. Got the alternator bracket made earlier, just hadn’t posted it yet. That’s a 6-71 blower, thought it would be a cool center piece, if you will. Still need to make a positive cable for the alternator (well, I already made one in truth, but I lost it), then I’ll mount it to the head and do the belt. You might notice I started using scale Motorsport bolt heads here and there (I think only one on the alternator bracket is visible in the picture). Those things are a pita to use, but they look pretty good once they’re on there. Quote Link to comment Share on other sites More sharing options...
Dann Tier Posted December 11, 2018 Share Posted December 11, 2018 On 12/9/2018 at 10:52 PM, THORDOOR220 said: Thanks guys. Bought a 2002 GT convertible yesterday, swapping over all the saleen stuff. Should be cool, just work. As far as the model goes, I’ve had some time today. Little engine work. Got the alternator bracket made earlier, just hadn’t posted it yet. That’s a 6-71 blower, thought it would be a cool center piece, if you will. Still need to make a positive cable for the alternator (well, I already made one in truth, but I lost it), then I’ll mount it to the head and do the belt. You might notice I started using scale Motorsport bolt heads here and there (I think only one on the alternator bracket is visible in the picture). Those things are a pita to use, but they look pretty good once they’re on there. Nice!! Quote Link to comment Share on other sites More sharing options...
scalepeter Posted December 11, 2018 Share Posted December 11, 2018 Looking good. Be following this one. Quote Link to comment Share on other sites More sharing options...
carmad1957 Posted December 11, 2018 Share Posted December 11, 2018 Yes sir- you are definitely headed in the right direction~**~ The suspension work looks good so far Looking forward to seeing it come along! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.