Jump to content
Model Cars Magazine Forum

Recommended Posts

Posted
33 minutes ago, Jim B said:

Because I'd still need to get the rear door on there some how.  And to make it completely correct, I need an I-6 as well.  I can probably source the rear seat from the 1957 Ford Custom 300.

Rock Island Auction sold this car for $46,000 in 2019.

HI Jim. I'm not sure from your reply that I made myself plain enough as to what I was suggesting. As I understand it you are wanting to build a '57 Chevy 4-door 150 series ? What I was trying to suggest was to use the Resin '57 4-door 210 series body and convert that body to a 150 series car. This would give you all of the basic body that is needed with only the side trim needing to be changed. My thought was to remove the side moldings from the Resin body and use stripes of plastic to create the correct 150 trim and then glue that to the Resin body. I have done this using different sized material from Plastruct or Evergreen depending on the sizes that I could find. I think the Round 2 release of the '59 Chevy C-10 pickup may give you about as close of an engine to the'57 6 cylinder engine as is out there. 

  • Like 2
Posted
4 hours ago, espo said:

Round 2 release of the '59 Chevy C-10 pickup

You mean the 60 Chevrolet Right? The 6cyl from this kt is an excellent engine choice for the 57 Chevy. ?

51PE+Luz5XL._AC_SY580_.jpg

Posted

ranma built this kit, I lended the 6cyl from the 60 for the project. It's basically a direct fit... the carb needs to be trimmed so the breather will clear the hood but that's it. 

I would still suggest the 55 Chevy trim from the Revell hard top as a solution for the 150 conversion. 

DSC02907.thumb.JPG.d328a32e104b639eaf54e6a6c03d8cc8.jpeg.jpg

DSC02912.JPG.34d3d49a93cd12a4e0cfeac2b6b6645e.jpeg.jpg

DSC02906.JPG.2a1e4122e1d92f89eda25fe5d4bb229f.jpeg.jpg

Posted
11 hours ago, disconovaman said:

You mean the 60 Chevrolet Right? The 6cyl from this kt is an excellent engine choice for the 57 Chevy. ?

51PE+Luz5XL._AC_SY580_.jpg

I actually have that kit, and I planned to use the Rookie Resin GMC V6 conversion for something a little different.  So much for that idea.

Posted
12 hours ago, disconovaman said:

You mean the 60 Chevrolet Right? The 6cyl from this kt is an excellent engine choice for the 57 Chevy. ?

51PE+Luz5XL._AC_SY580_.jpg

Thank you for the correction. I didn't have the kit anywhere handy to be sure and I somehow thought of it being a '59 body style. Obviously I was wrong. 

Posted

I owned a couple of those early 60's trucks in high school and when Amt released the kit in the late 90's I bought a bunch. I also have a collection of the original long bed kits too. I want to eventually own another but the problem is, they have become really expensive now...

l was glad to see Round 2 bring it back but I do think the Boxart is a tad uninspiring. Purple with stock wheels and tires? I would've liked something with shop truck vibes... Maybe they will reissue the custom kit next... 

Screenshot_20180702-071056.jpg.41b9f6f41bd331f3e819a341c47977b0.jpg

IMG_20190109_172451.jpg.12ce072f62054a57b098d8eb3ba05e60.jpg

Posted
6 hours ago, Jim B said:

Looks like the kit sits a tad lower than your truck, Anthony.

Yeah, for sure! The custom issue (the one pictured) has a lowered suspension.

Funny story though, these trucks have torsion suspension and one day 16 year old me discovered that by cranking on those bolts would lower the truck to the ground. Then I ran it down to the Advance Auto parts store and bought spring clamps for the rear. I installed those right in the parking lot. I couldn't wait to cruise through the park in my low rider! ? (it was the 80's) It sat lower than the box art truck! It scaped the speed bumps every time... So when dad came home and seen it, needless to say he was not happy! He said "You can't drive it like that!"

It was 3 on the tree and the weight of the truck was constantly binding the shift linkage. So I had to raise it back up and get it realigned.  

 

Posted
On 9/7/2021 at 7:57 AM, Jim B said:

Unfortunately, for me anyway, the Star Models 1957 Chevy 4-Door Sedan is a 210, where the military ones are 150; so the chrome trim is incorrect.  I guess I could splice the rear of the '55 sedan to the front of the '57 sedan; but that is just a recipe for disaster!

The Modelhaus did have a '57 150 4 door available, but they are probably unobtanium nowadays.

Posted

Question.. is the roofline the same on Tri Five sedans.. two door and four door?  

If so, using a Black Widow body, it’s a matter of scribing new door lines, adding four door handles and moving the B pillar.  And filling in the old 2 door line.

  • Like 1
Posted (edited)

That is the most viable and easy to do solution. The interior panels will also need to be re-scribed to reflect a 4 DR 150.

Edited by SfanGoch

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...