Paul Payne Posted September 26, 2021 Share Posted September 26, 2021 Does anyone make, or has made in the past, either a 1938 Ford front end, or an entire body (coupe preferred)? Not interested in a die cast, 1/25th scale only. Any info appreciated! Quote Link to comment Share on other sites More sharing options...
John Pol Posted September 27, 2021 Share Posted September 27, 2021 there is a 37 ford out but not a 38 Quote Link to comment Share on other sites More sharing options...
misterNNL Posted September 27, 2021 Share Posted September 27, 2021 49 minutes ago, John Pol said: there is a 37 ford out but not a 38 Yoh might check out the wonderful world of 3D printing Quote Link to comment Share on other sites More sharing options...
alan barton Posted September 27, 2021 Share Posted September 27, 2021 (edited) Hi Paul, I can help you with this conversion but alas, I never did arrive at a good way to do the grille and for my application i didn't need hood side panels although I don't see them as being too horrible to fabricate. But that grille, wow, finely spaced bars, curving in two directions at once and angled as well, sheeesh! You can see my conversion here. First up to clear up some common misconceptions. A 38 has little in common with a 37 Ford, but has much in common with a 39 or 40 Ford. You could certainly use the headlight buckets and lenses from a 37, even though the lenses on a 38 have a fuller curve than the flatter 37 version, I don't think it would matter too much in 1/25th scale. Secondly, the Black Force is very customised and would take a lot of cutting and shutting to get closer to stock. Dr Kerry suggested I look at the Black Force grille and I must confess to not doing that yet as my BF kit is deeply buried in storage at the moment. I am going to guess it will still take some work. I recall that Early Racing Classics did a 38 or 39 Standard racecar resin body once. No idea if they are still in business or not - I think you had to look for Karl Stark on Facebook. Hope this helps. Cheers Alan Edited September 27, 2021 by alan barton Quote Link to comment Share on other sites More sharing options...
Paul Payne Posted September 27, 2021 Author Share Posted September 27, 2021 Alan, thank you for the info. I had forgotten about the Black Force- I will have to take a closer look. I am mainly interested in the grill and headlights for a custom project, so exact stock is not as important as it would be for a stock builder. Quote Link to comment Share on other sites More sharing options...
Claude Thibodeau Posted September 27, 2021 Share Posted September 27, 2021 Hi Paul! Lucky for you, Testor's had a Coupester kit, actually a variation on the Boyd Smoothster kit, but with different nose (like a 38), and a fixed roof. I know you can mash them up, as I did for a friend of mine who wanted one. My pics show the coupester kit, with the Smoothster removable roof fixed solid instead of the Coupester original roof. Might work... See pix... CT 1 Quote Link to comment Share on other sites More sharing options...
Dave G. Posted September 28, 2021 Share Posted September 28, 2021 Is there a more stock appearing version of that 38 Claude ? It looks like there are two to three iterations of it ? You did a great job on that ! I'd be inclined to put a wash on that grill though to shadow the recesses ( can still be done on a finished model).. Quote Link to comment Share on other sites More sharing options...
Kit Basher Posted September 28, 2021 Share Posted September 28, 2021 Is this Lindberg '38 any help? Quote Link to comment Share on other sites More sharing options...
Dave G. Posted September 28, 2021 Share Posted September 28, 2021 (edited) 1 hour ago, Kit Basher said: Is this Lindberg '38 any help? Are you addressing the OP or my post above ? Edited September 28, 2021 by Dave G. Quote Link to comment Share on other sites More sharing options...
Claude Thibodeau Posted September 28, 2021 Share Posted September 28, 2021 12 hours ago, Dave G. said: Is there a more stock appearing version of that 38 Claude ? It looks like there are two to three iterations of it ? You did a great job on that ! I'd be inclined to put a wash on that grill though to shadow the recesses ( can still be done on a finished model).. Hi David! Yes, I made a few mods, mostly to the hood sides blisters. It's just a curbside (no interior), destined as a gift for a customer whose grandson wanted a copy of the real car I build for his Grand Pa... (see pic below). But nonetheless, it might do as a base for our friend's project... CT Quote Link to comment Share on other sites More sharing options...
Kit Basher Posted September 29, 2021 Share Posted September 29, 2021 On 9/28/2021 at 7:31 AM, Dave G. said: Are you addressing the OP or my post above ? I was thinking about the OP, but if it applies to you as well, it's all good. After looking at the Lindberg kit, the grille is very different from the one Claude shows above. Also, now I think about it, isn't the Lindberg kit 1/24? Quote Link to comment Share on other sites More sharing options...
Dave G. Posted September 29, 2021 Share Posted September 29, 2021 46 minutes ago, Kit Basher said: I was thinking about the OP, but if it applies to you as well, it's all good. After looking at the Lindberg kit, the grille is very different from the one Claude shows above. Also, now I think about it, isn't the Lindberg kit 1/24? OK. And yes 1/24. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.