Scale-Master Posted October 18, 2023 Share Posted October 18, 2023 This one is being built using the 1/24th scale Tamiya kit with a Gold Leaf tribute scheme on a street car. The kit only builds right-hand drive so I am converting it to left-hand drive. First I modified the back (front?) of the dash to accept the steering column at the correct angle, notched the lower edge for it and removed the notch on the right side. Then I drilled new holes for the tach and speedo and the three little lights in between them. They will be filled with machined aluminum parts. Figured I might as well drill out the four other gauges as well so they would all match… The old recess for the RHD gauge cluster was cut out and deepened. The wood grain is hand painted and the new aluminum gauges and warning lights have been installed. The decals for the gauges came with the kit; I added the one for the radio. The steering wheel and column are done too. I added decals to the turn signal and wiper stalks; the horn button decal is from the kit. 7 Quote Link to comment Share on other sites More sharing options...
Scale-Master Posted October 20, 2023 Author Share Posted October 20, 2023 The wiper (mounting hole), washer and antenna were relocated to the opposite sides of the body. A new washer and antenna were machined out of aluminum. The pedals and parking brake lever were reworked and moved to their proper places on the left. The shifter knob and parking brake handle are the same hand painted wood grain as on the dash. 3 Quote Link to comment Share on other sites More sharing options...
Scale-Master Posted October 21, 2023 Author Share Posted October 21, 2023 The fuel filler necks were removed to make filling the seam in front of them easier to manage. New filler necks have been machined out of aluminum. 3 Quote Link to comment Share on other sites More sharing options...
beeRS Posted October 21, 2023 Share Posted October 21, 2023 Great work on converting the dashboard. 1 Quote Link to comment Share on other sites More sharing options...
Scale-Master Posted October 22, 2023 Author Share Posted October 22, 2023 Thanks Sonny! This is the engine. Basically out of the box but I added ignition wires w/boots. And some decals. 3 Quote Link to comment Share on other sites More sharing options...
porschercr Posted October 22, 2023 Share Posted October 22, 2023 Nice work. 1 Quote Link to comment Share on other sites More sharing options...
slusher Posted October 23, 2023 Share Posted October 23, 2023 Very nice engine and dash! 1 Quote Link to comment Share on other sites More sharing options...
Scale-Master Posted October 23, 2023 Author Share Posted October 23, 2023 I used the optional Watanabe wheels and machined new aluminum hexagonal center caps to accept the Lotus decals from the kit. The gunmetal centers were sprayed and the silver outer sections were brush painted with Tamiya LP-11 Silver. 3 Quote Link to comment Share on other sites More sharing options...
Dave Van Posted October 23, 2023 Share Posted October 23, 2023 Nice detail work!!!! My brother in law had a real JPS version........drivers foot box is not that big!!! 1 Quote Link to comment Share on other sites More sharing options...
Scale-Master Posted October 24, 2023 Author Share Posted October 24, 2023 The red and white have been applied, both Tamiya lacquers; decanted and airbrushed. (TS-49 & TS-26) 3 1 Quote Link to comment Share on other sites More sharing options...
Scale-Master Posted October 25, 2023 Author Share Posted October 25, 2023 The frame/suspension/engine are mated together. So far everything fits very well. 2 Quote Link to comment Share on other sites More sharing options...
Justin Porter Posted October 25, 2023 Share Posted October 25, 2023 Awesome to see you give this kit a little extra attention. I still feel it's one of the best in the whole of the Tamiya classic sports car range. 1 Quote Link to comment Share on other sites More sharing options...
Rich Chernosky Posted October 25, 2023 Share Posted October 25, 2023 Nice little kit Mark...you are doing it some serious justice. 1 Quote Link to comment Share on other sites More sharing options...
NOBLNG Posted October 25, 2023 Share Posted October 25, 2023 Nice work!👍 The dashboard looks great. I like all the little aluminum bits.😎 Quote Link to comment Share on other sites More sharing options...
Scale-Master Posted October 26, 2023 Author Share Posted October 26, 2023 Thanks guys! The frame & engine have been mated to the chassis. I wired the battery too. 2 Quote Link to comment Share on other sites More sharing options...
porschercr Posted October 26, 2023 Share Posted October 26, 2023 Looking good. Trevor 1 Quote Link to comment Share on other sites More sharing options...
Roadrunner Posted October 27, 2023 Share Posted October 27, 2023 Excellent work. Quote Link to comment Share on other sites More sharing options...
Scale-Master Posted October 27, 2023 Author Share Posted October 27, 2023 The seatbelts and PE hardware came in the kit. There are three colors and three brands to choose from. I thought the red was a good accent (blue and black are the other options) and since I use Schroth belts in my real car I used those labels. A little patience goes a long way putting them together. 4 Quote Link to comment Share on other sites More sharing options...
Scale-Master Posted October 28, 2023 Author Share Posted October 28, 2023 I drew and printed the Gold Leaf decals. 2 1 Quote Link to comment Share on other sites More sharing options...
Scale-Master Posted October 31, 2023 Author Share Posted October 31, 2023 The chrome window trim has been foiled and I used Scale-Master decal stripes for the rubber seals on the wind wings. 2 Quote Link to comment Share on other sites More sharing options...
porschercr Posted October 31, 2023 Share Posted October 31, 2023 (edited) Impressive job on the foil and rubber seals. Edited October 31, 2023 by porschercr Quote Link to comment Share on other sites More sharing options...
Scale-Master Posted November 14, 2023 Author Share Posted November 14, 2023 The engine cover and wing are done. The PE screens have a really cool woven pattern like real screens. The chrome details are from the kit except the BMF'd hinges. 2 Quote Link to comment Share on other sites More sharing options...
absmiami Posted November 14, 2023 Share Posted November 14, 2023 24th sc ?? is it a fever ?? Quote Link to comment Share on other sites More sharing options...
Scale-Master Posted November 28, 2023 Author Share Posted November 28, 2023 I made two rear license plates; one using the European (British) style for the part that came with the kit and an American one I got from my leftover parts stash. 4 Quote Link to comment Share on other sites More sharing options...
Scale-Master Posted December 1, 2023 Author Share Posted December 1, 2023 This one is done: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.