om617 Posted January 5, 2014 Posted January 5, 2014 Sunday now,but these are on the table. Tamiya 500 SEC Lorinser with Tamiya 600SEL AMG v12 engine and trans + 80s style AMG wheels. Just an mock up as for now. AMT 58 Impala. Plan is to make clean street machine with VCG 572 cid engine.
o-man Posted January 6, 2014 Posted January 6, 2014 Ford GT, 65 Chevy stepside and a Ford panel van surrounded by my messiness.
Tom Geiger Posted January 6, 2014 Posted January 6, 2014 (edited) I got a lot of work done on this one this weekend. The interior is pretty much in it, the seats have been in and out three times. Last time because once I got the door panels glued in, they hit. So out they came to pull them in tighter to the center engine cover, which also had to come back out when I saw I forgot the install the friggin radiator before I glued it in. And it's tough to remember what you were thinking during the build of a model that has been sitting 15 years. See the porthole tear drop window hole? I had some neat kit part ones, that would have been installed from inside the body on whatever van kit I swiped them from. But the resin body was too thick and I didn't have the holes carved out big enough to accept them anyway. So out came the Vac-U-Form and I made myself a thin pair that are now glued to the outside of the body. I used a silver Sharpie to give them a frame and they look A-Okay. It's things like this that have made the final details of this one very slow going! The project is at that point where you glue on one part and need to walk away to wait for it to dry. Now onward to figure out a better way to do the jalousie windows on the passenger side! Edited January 6, 2014 by Tom Geiger
Swamp Dog Posted January 6, 2014 Posted January 6, 2014 Okay, I'm a little late............. great looking camper..only one thing i see u may wanta change is the tail lights..a little to much of them is sticking out.. great job..
Nick Winter Posted January 7, 2014 Posted January 7, 2014 great looking camper..only one thing i see u may wanta change is the tail lights..a little to much of them is sticking out.. great job.. I had that thought after the CA glue had set up, now they aren't coming off, the pictures amplify their size as compared to looking at it in person anyway. Nick
charlie8575 Posted January 7, 2014 Posted January 7, 2014 Nice trucks, David. Nick, whose camper kit is that? Looks good. Charlie Larkin
Nick Winter Posted January 8, 2014 Posted January 8, 2014 Nice trucks, David. Nick, whose camper kit is that? Looks good. Charlie Larkin Charlie, It's a Collaboration between Evergreen styrene and my imagination Nick
cartpix Posted January 12, 2014 Posted January 12, 2014 Here's what my bench looked like, before I started. Watching Street Outlaws This is how I left the Corvette motor Distributor wired & carb installed Air cleaner & fuel line Oil filter The bench is a little cleaner
DriftingRookie Posted January 12, 2014 Posted January 12, 2014 a little late, have 3 builds going on at the bench.
Belugawrx Posted January 12, 2014 Posted January 12, 2014 I guess its time to clean the desk... YaaY workbench saturdays The 70.5 is ready to go together... The Challenger is just started... The '49 is ... ah... umm a work/experiment in progress... The '40 delivery... well ... it will be a rat rod.. someday Right now I'm gonna buckle down and get this 70.5 DONE
charlie8575 Posted January 13, 2014 Posted January 13, 2014 Charlie, It's a Collaboration between Evergreen styrene and my imagination Nick That's scratched? Very nice work indeed. Charlie Larkin
Nick Winter Posted January 15, 2014 Posted January 15, 2014 That's scratched? Very nice work indeed. Charlie Larkin Thank you Charlie!
Tom Geiger Posted January 16, 2014 Posted January 16, 2014 Nick, here's some inspiration for when you get to the point of creating those windows!
Mopar - D Posted January 18, 2014 Posted January 18, 2014 I found this thread this past week and after going through all 60 page decided I would start adding my Sat bench. Here is my bench with my current 64 Belvedere. My goal today will be to finish the BMF install the trailer hitch and install the glass.
jrherald420 Posted January 18, 2014 Posted January 18, 2014 Im hoping to start final work on one of the 3- 71 Hemi Cudas i started right after X-mas. I would like to finish it tonight so i can take it to the model club meeting tomorrow.
o-man Posted January 19, 2014 Posted January 19, 2014 My messy work area. A major PITA Revell Porsche sitting in the middle of it.
bryan_m Posted January 19, 2014 Posted January 19, 2014 after being away for over a year from building......i finally have a new bench, its not all together yet, but enuff so i can work. hopefully i can get movin on my 41 willys gasser soon... cheers bryan
Old Buckaroo Posted January 19, 2014 Posted January 19, 2014 For once I remembered Currently working on a Cummins engine for the KW Aero that came with a Detroit.
JoeAngersIII Posted January 19, 2014 Posted January 19, 2014 Here's my work area, which happens to be in my kids' play room as well. As is usual, I have way too many on-going projects
Skypower Posted January 19, 2014 Posted January 19, 2014 This is my mess tonight and this little piece is what's kicked my but lately. Tried scratch building a fuel pressure regulator.
64SS350 Posted January 20, 2014 Posted January 20, 2014 Had a busy and bad week, this is it for about a week or so.. Always have several going at once, currently '70 Olds Cutlass Ralley 350
sjordan2 Posted January 20, 2014 Posted January 20, 2014 (edited) After 4.5 years in the General section and over 173,000 views, why is this topic suddenly moved into Community Builds?????? Edited January 20, 2014 by sjordan2
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now