Lownslow Posted June 19, 2011 Posted June 19, 2011 started buffing this with less than stellar results the paint i used was pretty contaminated cause it was spotty started assembly on this stared at this for a hour trying to figure out what other wheels i have that might work with this
modelmarknz Posted June 19, 2011 Posted June 19, 2011 WOW .....WOW ..... WOW thanks chuck , that sure is one awesome Rat Rod wrecker, I`ve put a few pics of the Peterbuilt Kenworth Rat rod on the Rat Rod Friday page, But no were as to the standard of your wrecker... Also save our Foki page too Cheers Mark
Janne Herajärvi Posted June 19, 2011 Posted June 19, 2011 Its a chopper... More pics in othermodels section
seeker589 Posted June 19, 2011 Posted June 19, 2011 And the beginnings of a beater, rat rod... '95 Toyota Supra???? You don't just think outside the box - you shead it up and burn it! Outstanding!
crazyjim Posted June 19, 2011 Posted June 19, 2011 Been a busy weekend for me. I was working on a display for my Crazy Scale Auto Parts. I try to maintain an inventory of at least 2 packages of each item. Check 'em out at http://s544.photobucket.com/albums/hh330/IMcrazyjim/Crazy%20Scale%20Auto%20Parts/ or just click on Crazy Scale Auto Parts below.
Agent G Posted June 19, 2011 Posted June 19, 2011 I'm working on an armored car for a "what if" sci-fi build on another forum. Everything other than gray plastic is scratch built. G
crazyjim Posted June 19, 2011 Posted June 19, 2011 Hi Wayne - what's that white armor plate? Does it have possibilities for car/truck interior panels? That's a pretty wild armor car. I'll bet it's going to have lots of weapons on it.
Lownslow Posted June 19, 2011 Posted June 19, 2011 What roof are you using on that Mach III? revell c6 snapper
Jamez Posted June 19, 2011 Posted June 19, 2011 nothing this saturday, or the last 3 for that matter.... my work bench.. currently a baby change station.
Lownslow Posted June 19, 2011 Posted June 19, 2011 I'm working on an armored car for a "what if" sci-fi build on another forum. Everything other than gray plastic is scratch built. G at quick glace it looked like lego plating
Agent G Posted June 19, 2011 Posted June 19, 2011 (edited) To be exact it is Plastruct sheet #91541. It is a 1.4mm square tile pattern made for HO scale RR purposes. I believe it would make a great interior pattern. That's the beauty of a what if build, Legos, or whatever, it's all good! Jim, it'll get a 90mm cannon, a coaxial FN Mag 58, and another Mag 58 on the commander's cupola. G Edited June 19, 2011 by AgentG
Chuck Most Posted June 20, 2011 Posted June 20, 2011 You don't just think outside the box - you shead it up and burn it! Outstanding! Well, when I see a line... I cross it!
Scott Colmer Posted June 20, 2011 Posted June 20, 2011 After I made a ginormous pile of tree cuttings, sat down and finished the Beehive oil filter. I'll do be doing this again. Way too much work. Next is to finalize the hatch hinges and latch. Hosted on Fotki Here you can see the hinge supports and the oil filter before the disks were epoxied together. Hosted on Fotki Scott
coreyh29645 Posted June 20, 2011 Posted June 20, 2011 a little different flavor was on my bench this last saturday but i guess they are still a kind of model car.
W-409 Posted June 22, 2011 Posted June 22, 2011 Well, it's not saturday but almost it is... I think, this build will be on my workbench next saturday, because I'm not home! Going to summer cottage, and must leave my projects for few days... But anyway, I'm just learning to build something different, I have a Mustang gluebomb...
Jared Roach Posted June 25, 2011 Author Posted June 25, 2011 Here's what I'm working on today; and Yes I am keeping the straight six. Thanks for looking.
dillonpitts Posted June 25, 2011 Posted June 25, 2011 this hasnt been updated in a while so i figure ill bring it back to life. plus i never posted in here before lol. i have a small corner in the garage i work at A bong on the workbench lol
highway Posted June 25, 2011 Posted June 25, 2011 A bong on the workbench lol I guess sometimes working on a model gets stressful, man!!!!
Agent G Posted June 25, 2011 Posted June 25, 2011 (edited) I got it painted, but had to clean up the bench for a bit. I'll be working more in a week or so. I am also planning another Lindbergh Dodge Charger police car, this one with a twist. Oh and there's a problem with a "bong and a workbench"? G Edited June 25, 2011 by AgentG
bandit1 Posted June 25, 2011 Posted June 25, 2011 As usual, too many projects. need info on where you got that allis chalmers at bud!
Cesar Bossolani Posted June 25, 2011 Posted June 25, 2011 I'm trying to keep organized... final assembly it's most miserable part of build... LOL!!! Cesar
PeterC(MrMondeo) Posted June 27, 2011 Posted June 27, 2011 It was saturday when i took the pics , i only just rememberd to post em so sorry lol so i was up at 5.30am, so decided to have a tidy up, and this is the result
Ron a.k.a. Grouchy Pants Posted June 27, 2011 Posted June 27, 2011 You have a nice spot there in front of the window, that looks nice and cozy. Is that a Dremel tool you have hanging there on the side of your table/bench? Thats a neat idea, did you make the hanger yourself or? Thanks Ron
PeterC(MrMondeo) Posted June 27, 2011 Posted June 27, 2011 You have a nice spot there in front of the window, that looks nice and cozy. Is that a Dremel tool you have hanging there on the side of your table/bench? Thats a neat idea, did you make the hanger yourself or? Thanks Ron its a dremel type tool, and the stand came with it, its a great thing too, the window is handy for light and freash air lol and the wife let me have her old dressing table to use
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now