Lownslow Posted June 19, 2011 Share Posted June 19, 2011 started buffing this with less than stellar results the paint i used was pretty contaminated cause it was spotty started assembly on this stared at this for a hour trying to figure out what other wheels i have that might work with this Quote Link to comment Share on other sites More sharing options...
Chuck Most Posted June 19, 2011 Share Posted June 19, 2011 What roof are you using on that Mach III? Quote Link to comment Share on other sites More sharing options...
modelmarknz Posted June 19, 2011 Share Posted June 19, 2011 WOW .....WOW ..... WOW thanks chuck , that sure is one awesome Rat Rod wrecker, I`ve put a few pics of the Peterbuilt Kenworth Rat rod on the Rat Rod Friday page, But no were as to the standard of your wrecker... Also save our Foki page too Cheers Mark Quote Link to comment Share on other sites More sharing options...
Janne Herajärvi Posted June 19, 2011 Share Posted June 19, 2011 Its a chopper... More pics in othermodels section Quote Link to comment Share on other sites More sharing options...
seeker589 Posted June 19, 2011 Share Posted June 19, 2011 And the beginnings of a beater, rat rod... '95 Toyota Supra???? You don't just think outside the box - you shead it up and burn it! Outstanding! Quote Link to comment Share on other sites More sharing options...
crazyjim Posted June 19, 2011 Share Posted June 19, 2011 Been a busy weekend for me. I was working on a display for my Crazy Scale Auto Parts. I try to maintain an inventory of at least 2 packages of each item. Check 'em out at http://s544.photobucket.com/albums/hh330/IMcrazyjim/Crazy%20Scale%20Auto%20Parts/ or just click on Crazy Scale Auto Parts below. Quote Link to comment Share on other sites More sharing options...
Agent G Posted June 19, 2011 Share Posted June 19, 2011 I'm working on an armored car for a "what if" sci-fi build on another forum. Everything other than gray plastic is scratch built. G Quote Link to comment Share on other sites More sharing options...
crazyjim Posted June 19, 2011 Share Posted June 19, 2011 Hi Wayne - what's that white armor plate? Does it have possibilities for car/truck interior panels? That's a pretty wild armor car. I'll bet it's going to have lots of weapons on it. Quote Link to comment Share on other sites More sharing options...
Lownslow Posted June 19, 2011 Share Posted June 19, 2011 What roof are you using on that Mach III? revell c6 snapper Quote Link to comment Share on other sites More sharing options...
Jamez Posted June 19, 2011 Share Posted June 19, 2011 nothing this saturday, or the last 3 for that matter.... my work bench.. currently a baby change station. Quote Link to comment Share on other sites More sharing options...
Lownslow Posted June 19, 2011 Share Posted June 19, 2011 I'm working on an armored car for a "what if" sci-fi build on another forum. Everything other than gray plastic is scratch built. G at quick glace it looked like lego plating Quote Link to comment Share on other sites More sharing options...
Agent G Posted June 19, 2011 Share Posted June 19, 2011 (edited) To be exact it is Plastruct sheet #91541. It is a 1.4mm square tile pattern made for HO scale RR purposes. I believe it would make a great interior pattern. That's the beauty of a what if build, Legos, or whatever, it's all good! Jim, it'll get a 90mm cannon, a coaxial FN Mag 58, and another Mag 58 on the commander's cupola. G Edited June 19, 2011 by AgentG Quote Link to comment Share on other sites More sharing options...
Chuck Most Posted June 20, 2011 Share Posted June 20, 2011 You don't just think outside the box - you shead it up and burn it! Outstanding! Well, when I see a line... I cross it! Quote Link to comment Share on other sites More sharing options...
Scott Colmer Posted June 20, 2011 Share Posted June 20, 2011 After I made a ginormous pile of tree cuttings, sat down and finished the Beehive oil filter. I'll do be doing this again. Way too much work. Next is to finalize the hatch hinges and latch. Hosted on Fotki Here you can see the hinge supports and the oil filter before the disks were epoxied together. Hosted on Fotki Scott Quote Link to comment Share on other sites More sharing options...
coreyh29645 Posted June 20, 2011 Share Posted June 20, 2011 a little different flavor was on my bench this last saturday but i guess they are still a kind of model car. Quote Link to comment Share on other sites More sharing options...
W-409 Posted June 22, 2011 Share Posted June 22, 2011 Well, it's not saturday but almost it is... I think, this build will be on my workbench next saturday, because I'm not home! Going to summer cottage, and must leave my projects for few days... But anyway, I'm just learning to build something different, I have a Mustang gluebomb... Quote Link to comment Share on other sites More sharing options...
Jared Roach Posted June 25, 2011 Author Share Posted June 25, 2011 Here's what I'm working on today; and Yes I am keeping the straight six. Thanks for looking. Quote Link to comment Share on other sites More sharing options...
dillonpitts Posted June 25, 2011 Share Posted June 25, 2011 this hasnt been updated in a while so i figure ill bring it back to life. plus i never posted in here before lol. i have a small corner in the garage i work at A bong on the workbench lol Quote Link to comment Share on other sites More sharing options...
highway Posted June 25, 2011 Share Posted June 25, 2011 A bong on the workbench lol I guess sometimes working on a model gets stressful, man!!!! Quote Link to comment Share on other sites More sharing options...
Agent G Posted June 25, 2011 Share Posted June 25, 2011 (edited) I got it painted, but had to clean up the bench for a bit. I'll be working more in a week or so. I am also planning another Lindbergh Dodge Charger police car, this one with a twist. Oh and there's a problem with a "bong and a workbench"? G Edited June 25, 2011 by AgentG Quote Link to comment Share on other sites More sharing options...
bandit1 Posted June 25, 2011 Share Posted June 25, 2011 As usual, too many projects. need info on where you got that allis chalmers at bud! Quote Link to comment Share on other sites More sharing options...
Cesar Bossolani Posted June 25, 2011 Share Posted June 25, 2011 I'm trying to keep organized... final assembly it's most miserable part of build... LOL!!! Cesar Quote Link to comment Share on other sites More sharing options...
PeterC(MrMondeo) Posted June 27, 2011 Share Posted June 27, 2011 It was saturday when i took the pics , i only just rememberd to post em so sorry lol so i was up at 5.30am, so decided to have a tidy up, and this is the result Quote Link to comment Share on other sites More sharing options...
Ron a.k.a. Grouchy Pants Posted June 27, 2011 Share Posted June 27, 2011 You have a nice spot there in front of the window, that looks nice and cozy. Is that a Dremel tool you have hanging there on the side of your table/bench? Thats a neat idea, did you make the hanger yourself or? Thanks Ron Quote Link to comment Share on other sites More sharing options...
PeterC(MrMondeo) Posted June 27, 2011 Share Posted June 27, 2011 You have a nice spot there in front of the window, that looks nice and cozy. Is that a Dremel tool you have hanging there on the side of your table/bench? Thats a neat idea, did you make the hanger yourself or? Thanks Ron its a dremel type tool, and the stand came with it, its a great thing too, the window is handy for light and freash air lol and the wife let me have her old dressing table to use Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.