JasonFL Posted July 13, 2011 Posted July 13, 2011 This thing is bad ass, looks 10x better then the black photo. I love the wheels on there, I even like the know back window. Nice work can't Wait to see it finished.
kenlwest Posted July 13, 2011 Posted July 13, 2011 Looks good. Maybe someone from GM is watching...LOL I can't figure out why Chevrolet isn't doing something like this. They already have a transmission/transaxle that would work. Remember, the Vette has the transmission between the rear wheels already...Change the bellhousing and you can bolt the engine right to it. Anyway, back to your model. I love the layout, lines, and shape. If Chevy builds one, they should copy your design. Frank Well, I am an engineer for GM; although I work in Interior Trim. Every Corvette since 1963 started out as a mid-engine variant. The issue has always been to try and create a midi, while still keeping the cost down to maintain the current customer base. The performance to cost ratio on the Vette is unmatched, (affordable performance) and GM has never shown an interest in creating a Ferarri or Lambi. Yes, GM could create a midi, BUT, the structural requirements, validation, and marketing risk is just something the company has consistently shied away from... Your concept car looks very much like what you could expect if GM were to ever create such a vehicle. I wouldn't really know for sure since GM's Design Department keeps a really tight box around Corvette's development - especially styling. By the way, we are working on the next generation Vette as we speak! It too started out as a midi... Nice Job on your concept car! Very Cool! Ken
customsrus Posted July 13, 2011 Author Posted July 13, 2011 You never cease to amaze me with all of the creative ideas that you have presented here on this board . Ed Shaver Thans Ed
customsrus Posted July 13, 2011 Author Posted July 13, 2011 This thing is bad ass, looks 10x better then the black photo. I love the wheels on there, I even like the know back window. Nice work can't Wait to see it finished. Thanks The wheels are off the new Camaro. It will have the back glass in it.
customsrus Posted July 13, 2011 Author Posted July 13, 2011 Well, I am an engineer for GM; although I work in Interior Trim. Every Corvette since 1963 started out as a mid-engine variant. The issue has always been to try and create a midi, while still keeping the cost down to maintain the current customer base. The performance to cost ratio on the Vette is unmatched, (affordable performance) and GM has never shown an interest in creating a Ferarri or Lambi. Yes, GM could create a midi, BUT, the structural requirements, validation, and marketing risk is just something the company has consistently shied away from... Your concept car looks very much like what you could expect if GM were to ever create such a vehicle. I wouldn't really know for sure since GM's Design Department keeps a really tight box around Corvette's development - especially styling. By the way, we are working on the next generation Vette as we speak! It too started out as a midi... Nice Job on your concept car! Very Cool! Ken Thanks Ken, maybe you can sneak a peek at the new Corvette and give us all a heads up.LOL
MrObsessive Posted July 13, 2011 Posted July 13, 2011 That's some very interesting info on the design evolutions of the C3 and up Corvettes-------something I've never heard before. I just hope the next Gen 'Vette gets away from that too flat/cut off rear end, and brings back some "swoop". John your concept is looking mighty nice! For some reason, the back end of yours seems more suited to your concept than the 1:1. Maybe it's the extra length that helps?
customsrus Posted July 29, 2011 Author Posted July 29, 2011 (edited) Not much done but I did get to do some work to the rear bumper. Bumper was looking to plain so I added some rear heat diffusers and the c-5 corvette script off of the rear bumper.Also added some bracing to the chassis Edited August 28, 2011 by customsrus
Danno Posted July 29, 2011 Posted July 29, 2011 Well, I am an engineer for GM; although I work in Interior Trim. Every Corvette since 1963 started out as a mid-engine variant. The issue has always been to try and create a midi, while still keeping the cost down to maintain the current customer base. The performance to cost ratio on the Vette is unmatched, (affordable performance) and GM has never shown an interest in creating a Ferarri or Lambi. Yes, GM could create a midi, BUT, the structural requirements, validation, and marketing risk is just something the company has consistently shied away from... Your concept car looks very much like what you could expect if GM were to ever create such a vehicle. I wouldn't really know for sure since GM's Design Department keeps a really tight box around Corvette's development - especially styling. By the way, we are working on the next generation Vette as we speak! It too started out as a midi... Nice Job on your concept car! Very Cool! Ken Very interesting, Ken. A perspective we aren't often privvy to. Thanks for posting!
customsrus Posted August 28, 2011 Author Posted August 28, 2011 Well now that I finished the 68 Pontiac Banshee I can devote more time to this build. Worked on the frame a little and mocked up some front inner fenders.
LAone Posted August 28, 2011 Posted August 28, 2011 wow man, this is looking great. keep it going bro.
Maindrian Pace Posted August 28, 2011 Posted August 28, 2011 It's got a much more balanced look it than others I've seen which have attempted the mid engine configuration. Looking great, like a car that can actually be driven when finished. -MJS
Danno Posted August 28, 2011 Posted August 28, 2011 Great concept and excellent execution! I agree ~ it looks perfectly feasible as well as attractive!
customsrus Posted September 2, 2011 Author Posted September 2, 2011 Got a little done over the last few days. Added some details to the bottom of the frame. Painted the frame with some Tamiya Gunmetal. Finished up the fuel tank with some carbon fiber decals. Installed the suspension. And modified a couple of intake tubing and filters. Thanks.
customsrus Posted September 2, 2011 Author Posted September 2, 2011 (edited) Intake tubing and filters, which one looks better to you guys. Air ducts made from electrical wire with phone wire wrapped around. May wrap some thin strips of tape before being painted. This is the air inlet in the rear hatch. Edited September 2, 2011 by customsrus
customsrus Posted September 3, 2011 Author Posted September 3, 2011 (edited) Made a engine cover out of sheet plastic, added inner structure to cover (forgot to take a picture). Cover will have clear plastic window attached from the underside. Also made a heat diffuser (vent) out of an old hood scoop. Cut back window to allow for vent. Will have to shape back glass for a better fit, and I will also have to shape the vent. Edited September 3, 2011 by customsrus
customsrus Posted September 13, 2011 Author Posted September 13, 2011 Well I did not finished this as planned this weekend, but did manage to get something done on it. Chassis is now 99% complete just need to touch up some paint (hopefully thats all). The air ducts will be added after the body is mounted to the frame.If you look close you can see fuel lines have been added, also made a wiring harness and ran some vacuum lines, and ran cooling lines to the transmission cooler and the oil cooler.. As always comments are welcomed.
customsrus Posted September 13, 2011 Author Posted September 13, 2011 Well here is a final mock up before paint. I still dont know exactly what color I want. There are a few colors that I was thinking. Bright yellow, Atomic orange, burgandy mettallic, or Black mettallic. What do you guys think?
Crazy Ed Posted September 13, 2011 Posted September 13, 2011 John, what an interesting and well done build. For Color given the engine compartment I see it in Metallic Gun Metal Grey, with the Wheels Satin Black. Crazy Ed
surfjunke Posted September 13, 2011 Posted September 13, 2011 A Vette-arossa ! What a cool idea. Looks great. Very nice work. Can't wait to see what color you paint it.
djway3474 Posted September 14, 2011 Posted September 14, 2011 Looking good! Need to put it up next to my mid engine Cuda
customsrus Posted September 14, 2011 Author Posted September 14, 2011 John, what an interesting and well done build. For Color given the engine compartment I see it in Metallic Gun Metal Grey, with the Wheels Satin Black. Crazy Ed Thanks for the comments. I was kinda looking at colors similar to this early build of mind. I thougt it might make it look a little more classy. But the stealthy look might work.
customsrus Posted September 14, 2011 Author Posted September 14, 2011 Looking good! Need to put it up next to my mid engine Cuda Well lets see the pictures of your cuda.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now