Dr. Cranky Posted March 19, 2011 Posted March 19, 2011 This is an amazing build. I love the trio of vehicles. Love the color too, but then again Mooneyes is super cool.
gasser59 Posted March 19, 2011 Posted March 19, 2011 What a fantastic combination for building. Great work Terry and thanks for the inspiration to build one of these myself. And you're brass front axle looks perfect. Will you make it functional?
Terry Sumner Posted March 20, 2011 Author Posted March 20, 2011 OK..a little more done on the Dragster part. I scratchbuilt the front axle by using brass tubing and bending the upsweeps in my hands using a line I drew on paper for the pattern. Then I cut a couple of short lengths of tubing and soldered them to the axle with silver bearing solder. I didn't want to use anything with lead in it anticipating actual chroming of these parts later on. Tonight I started scratchbuilding the spindles. I have a little Unimat lathe so I took a 1/4" diameter piece of brass rod and got to work. First I turned the OD to .240". Then turned the spindle's axle to .062" diam. I then chucked the spindle into a pin vise to hold it. Then I used a cutter in the dremel tool to hog out the area between the tabs where the kingpin goes through. Then filed away more material there to get a nice slide fit of the spindle over the axle tubes. More cutting and fitting and then drilling an .062" hole through the spindle tabs and It's there. I plan on turning a threadless "bolt" to use as a kingpin which you can see in the first pic of the 1:1 spindle. I now have to make the 2 arms for the left spindle..one for the steering drag link and one for the tie rod. I haven't decided yet how I'm going to make them and attach them. I may drill and tap as I have a 0000-120 tap or I may just solder them to the spindle body...we'll have to see. And then I gotta make one to match the passenger side! This is what I'm trying to make (without the taper on the spindle axle): Hosted on Fotki The partly done spindle, less the arms... Hosted on Fotki The spindle on the axle using a piece of .062 brass rod as a temporary kingpin... Hosted on Fotki The spindle in the kit wheel... Hosted on Fotki The wheel/tire (which I'm not going to use...I plan on scratchbuilding the wire wheels)...on the axle... Hosted on Fotki
Janne Herajärvi Posted March 21, 2011 Posted March 21, 2011 Very interesting project. Keep up great work!
Randy D Posted March 21, 2011 Posted March 21, 2011 Hi Terry, Great thread!! What a save on the truck. The front axle and spindles looks really sweeeeet, can't wait to see your wheels!! Randy
gasser59 Posted March 22, 2011 Posted March 22, 2011 Very nice machining work indeed! Ha! Guess this answers my question if you were going to make it function. Very interested to see what you pull out your sleeve for the front wheels.
steve7119 Posted March 22, 2011 Posted March 22, 2011 I love this project! Very nice work! What did you use to make the spindle? I have tried a few with brass channel, but they come out too thin and fragile looking. They worked, but didn't look as good as I had wanted. Steve
Terry Sumner Posted March 23, 2011 Author Posted March 23, 2011 I love this project! Very nice work! What did you use to make the spindle? I have tried a few with brass channel, but they come out too thin and fragile looking. They worked, but didn't look as good as I had wanted. Steve Hi Steve, It started out as a solid brass rod .250" in diameter. All that info is in the top of the message above.
roadhawg Posted July 4, 2011 Posted July 4, 2011 Any updates on this? Or has it already gone "under glass" and I missed it?
Terry Sumner Posted July 4, 2011 Author Posted July 4, 2011 No you didn't miss it. I just haven't had much time to work on models. With warm weather, lot's of other things take priority! Yard work, projects in the workshop, my Harley, etc etc. I'll get back to it soon as I get some time..
91blaze Posted December 23, 2011 Posted December 23, 2011 Looks to me like you're doing a great job on this restoration. If you haven't decided already I would suggest using a dremel to get rid of the material in the grill. I think it would look alot nicer that way.
eviltwincustoms Posted December 23, 2011 Posted December 23, 2011 Hey Terry I got you covered on the door logos . Pm me Those look really nice and even have the curve to the "Moon Equipment Co.". Only thing I see wrong is the eye's are looking the wrong direction based on the first pic of the real truck. Pretty darn close though. This is an awesome build, and glad I stopped in and checked this out. Great job on resurrecting the glue bomb, it looks like brand new.
moparmagiclives Posted December 27, 2011 Posted December 27, 2011 Any more for us ??? Those look really nice and even have the curve to the "Moon Equipment Co.". Only thing I see wrong is the eye's are looking the wrong direction based on the first pic of the real truck. Pretty darn close though. This is an awesome build, and glad I stopped in and checked this out. Great job on resurrecting the glue bomb, it looks like brand new. He will probly have to get them printed by someone who can swap them left and right. I'm betting on the real truck they lean forward on both sides.
Terry Sumner Posted December 29, 2011 Author Posted December 29, 2011 I'll just use them as they are. Mr. Jackson was kind enough to send me a set of 2! And I just sent in an order to Modelhause yesterday for new window glass, front and rear bumpers, front grill and rear taillights. When that stuff gets in hopefully I can finish up the pickup truck part of this build!
Terry Sumner Posted February 2, 2012 Author Posted February 2, 2012 Got my order in today from Modelhaus! Yay! Now I can continue on this project. I ordered and received the front and rear bumpers with beautiful fresh chrome, a set of rear red taillights and the front and rear windows. The latter are vacuformed but that's ok...I'm used to working with vacuformed "glass" on airplane models so it should work out ok. Add to that the nice little door decals Tom Jackson so kindly sent me and it looks like I can now finish up this truck! Hosted on Fotki
Guest Johnny Posted February 2, 2012 Posted February 2, 2012 Sweet! Been waiting for this one to continue!
hotrod59f100 Posted February 3, 2012 Posted February 3, 2012 (edited) Wow looking good. How does the modelhaus glass fit? I have a resin kit I bought but the glass was a rough vacuumformed windshield ?I need a good replacement. Edited February 3, 2012 by hotrod59f100
Terry Sumner Posted February 3, 2012 Author Posted February 3, 2012 Wow looking good. How does the modelhaus glass fit? I have a resin kit I bought but the glass was a rough vacuumformed windshield ?I need a good replacement. I don't know yet as I just got it today and both the front and rear are vacuformed in one piece. You have to cut them both out and fit them to the openings. We will see how they fit and I'll report that here for you.
Terry Sumner Posted June 23, 2012 Author Posted June 23, 2012 (edited) Dug out the old Mooneyes project and did a little more work on it. I cleaned up the chassis quite a bit and gave it a shot of flat black to see how it looks...and it looks pretty good! Hosted on Fotki Also shot the clear coats on the body and after it dried I applied the Mooneyes decals on the doors... Many MANY thanks to Tom Jackson for those excellent door decals! Hosted on Fotki Found that I have QUITE the problem with the interior tub! look at the photo and see how far away from the doors the outside edges of the tubs are. There is about 3/16" space on each side! Not sure how I'm going to go about correcting that. Might have to cut the sides off and extend them to fit the interior... Hosted on Fotki Left side with decal on. Hosted on Fotki Edited June 23, 2012 by Terry Sumner
LoneWolf15 Posted June 23, 2012 Posted June 23, 2012 Hey, Old Folks ! Foggy recollection , been decades since I've been in one. , but .... The tops of those doors were quite wide and then rolled down . Plastruct strips are our friend here ? Might be easier than splitting the interior and moving it outward at the panels .
Terry Sumner Posted June 23, 2012 Author Posted June 23, 2012 Thanks Donn...maybe...but boy that sure is a pretty big space there... Photos don't do it justice!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now