jbwelda Posted March 1, 2012 Share Posted March 1, 2012 For those who might not have seen the "on the workbench" thread, here: http://www.modelcars...opic=19454&st=0 this is a near out of box build of the Hasegawa Jaguar XJS V12 TWR works car. you can check the linked workbench thread but in summary this went together pretty well though there were more than a few challenges. the most noticable at this point is that the hood/bonnet fit is horrible. not sure why this hadnt manifested itself when i was in the test fitting stages, but it became an issue on final assembly. the photos here were posed to minimize the problem but suffice it to say, this car will be displayed with the hood open and the motor on display. the undercarriage is highly detailed, right out of the box, with cooling tubes for the rear brakes and multi link suspension, and was a challenge to get to sit properly and look good. turned out pretty well overall and i am happy to have it join my Jag collection, but i gotta see about getting a new hood and fitting it properly. this ones paint makes scary noises when i attempt to stress it into a different shape. i might try some hot water if i get desperate enough but for now, this one is under glass! a nice shot of the motor and compartment: and finally, an attempt to glimpse in at the interior...not too successfully unfortunately: cheer and jeers cheerfully deflected! Quote Link to comment Share on other sites More sharing options...
jeffs396 Posted March 1, 2012 Share Posted March 1, 2012 Nicely done! Quote Link to comment Share on other sites More sharing options...
Erik Smith Posted March 1, 2012 Share Posted March 1, 2012 This is one kit that has always intrigued me. Hasegawa makes outstanding kits and this one has an engine to boot. Yours turned out very nice and has the right "look". Great work - now I'll go check out the WIP that I never saw... Quote Link to comment Share on other sites More sharing options...
Rmodeler Posted March 1, 2012 Share Posted March 1, 2012 I too, remember that kit and have a fondness for it. Beautiful job you did Quote Link to comment Share on other sites More sharing options...
ShawnS Posted March 1, 2012 Share Posted March 1, 2012 It turned out brilliant. All of the effort that you put into getting it to look good and sit right has payed off. Well done. I always wanted a few of those Jag kits but I have yet to actually come across one on any website that's not called Ebay. It has become a holy grail kit for me. Cheers ShawnS Quote Link to comment Share on other sites More sharing options...
Dr. Cranky Posted March 1, 2012 Share Posted March 1, 2012 William, it's a beautiful, stand out model. Thank you, and congratulations. Quote Link to comment Share on other sites More sharing options...
GeeBee Posted March 1, 2012 Share Posted March 1, 2012 That turned out really nice, I love the XJ-S, and Hasegawa did a nice job on these kits, I have the stock version and the convertible to build one day .... Quote Link to comment Share on other sites More sharing options...
cruz Posted March 1, 2012 Share Posted March 1, 2012 Looks great!! Quote Link to comment Share on other sites More sharing options...
ValvEasy Posted March 1, 2012 Share Posted March 1, 2012 Green....I'm a sucker for green. Fantastic work. Quote Link to comment Share on other sites More sharing options...
crispy Posted March 2, 2012 Share Posted March 2, 2012 I love this. Great work, really smooth. Love seeing something built that doesn't get seen much. Chris Quote Link to comment Share on other sites More sharing options...
ChrisR Posted March 2, 2012 Share Posted March 2, 2012 Great model! It seems that you matched the green paint well with the decals. What paint/colour did you use? Quote Link to comment Share on other sites More sharing options...
jaymcminn Posted March 2, 2012 Share Posted March 2, 2012 Great work on this big cat. It's funny- I didn't care too much for this design back in the '80's, but it has aged remarkably well. Your build really nails the look! Quote Link to comment Share on other sites More sharing options...
Dirkpitt289 Posted March 2, 2012 Share Posted March 2, 2012 I completely missed this build. What a stunning build Quote Link to comment Share on other sites More sharing options...
Merkur XR4Ti Posted March 2, 2012 Share Posted March 2, 2012 The decals were good even after all those years? Great job. Quote Link to comment Share on other sites More sharing options...
jbwelda Posted March 3, 2012 Author Share Posted March 3, 2012 (edited) hey thanks for all the comments and compliments! chris, its been so long since i painted this that i am embarrassed to admit i am not sure what paint was used but i believe it was tamiya british green and tamiya pure white. all the green you see is paint, there werent any green decals. well i take that back because the stripe running up the sides was indeed a green decal, but it is the one decal that fell apart, completely crumbled when it hit water. so to answer your question, Steve, yeah the decals were still good except for that one exception. edit: the line you see on the car now is an improvision: when the decal line shattered, i decided to lay down some thin tamiya masking tape and paint it with the brit green body color. then i just cut some thin slices of the painted tape and laid it down, followed by a coat or two of clear. i was surprised how easy it was and how well it worked out. i had imagined that when i hit the tape with clear coat it would curl up or lose adhesion. maybe i was just lucky but it stuck down when i cleared it. end edit after looking at the photos some, i realize that the door handles need some bare metal foil and some detailing with india ink...i would be tempted to do the door lines, trunk lines and fuel door too but those were some very shallow lines that i should have rescribed a couple times during the paint process, and i dont think i can or want to try to do any outlining especially since it will probably look heavy handed on the white. so i think i will let that particular sleeping dog lie. thanks again for looking and commenting! Edited March 3, 2012 by jbwelda Quote Link to comment Share on other sites More sharing options...
kruleworld Posted March 3, 2012 Share Posted March 3, 2012 heck, that's nicely built. big thumbs up Quote Link to comment Share on other sites More sharing options...
David G. Posted March 17, 2012 Share Posted March 17, 2012 Clean and solid! It looks great and has a good feel to it. David G. Quote Link to comment Share on other sites More sharing options...
RodneyBad Posted March 18, 2012 Share Posted March 18, 2012 Soo Glad to see this one Finished.. Followed the build and the build was and is Awesome.. Excellent work and I Love it. Makes me just want to look and mine and dream about finishing it. Quote Link to comment Share on other sites More sharing options...
Kanedge Posted March 18, 2012 Share Posted March 18, 2012 Nice build, I haven't seen of these cars for a long time. Bonnet doesn't show up too bad in photos, looks good to me. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.