MikeyB08 Posted August 7, 2013 Share Posted August 7, 2013 (edited) I'm currently working on an AMT/ERLT 1994 Chevy Camaro Z28 Convertible. I've always felt that being a convertible, more detail should be present since the interior is easily seen. So... I opened the glove box. I'm planning on adding a CD changer and/or Camaro Owners Manual. Might even have a huge pile of parking tickets falling out. Keep in mind, this was my first attempt and this is in no way the only way to have an operational glove box. If anyone has any tips, or things to do/try different, please feel free to share. Excuse my bad cutting... My first time doing something like this. It's still a W.I.P. Well here we go: Carefully cut away the Glove Box lid on your dashboard. Make sure not to cut any fingers like I did. Using the smallest bit you have for your pin vise, drill out two holes as pictured. For the hole near the center (instrument cluster, thermostats, etc.), You don't have to drill in very far. For the edge closest to the door panels, I was able to drill all the way through. This makes the next step easier. Next your drill 2 corresponding holes in the glove box lid. As you can see in picture 4, I glued a small piece of wire where the yellow circle is at. Now check for clearance and fitment. Make adjustments now if needed. Once your glove box lid fits how you would like, put the pin to the corresponding hole. Now you simply cut another small piece of wire and push through the hole closest to the door panel into the corresponding hole on the glove box lid. DO NOT GLUE!!!! Glueing here would prevent the glove box from being operational. I'm also working on the center console. If anyone has any questions, feel free to ask. Enjoy and Build On! Edited August 7, 2013 by MikeyB08 Quote Link to comment Share on other sites More sharing options...
cobraman Posted August 7, 2013 Share Posted August 7, 2013 Cool. Quote Link to comment Share on other sites More sharing options...
b_lever1 Posted August 8, 2013 Share Posted August 8, 2013 This is in the why didn't I think of that!!!! Awsome you do realize millions are going to want one how much$$$$$ LOL very neat Quote Link to comment Share on other sites More sharing options...
MikeyB08 Posted August 8, 2013 Author Share Posted August 8, 2013 lol... Thanks. Quote Link to comment Share on other sites More sharing options...
Mike Kucaba Posted August 8, 2013 Share Posted August 8, 2013 Nice work and a cool idea! (I would've just used Scotch tape as a hinge.) Quote Link to comment Share on other sites More sharing options...
Swamp Dog Posted August 8, 2013 Share Posted August 8, 2013 cool.. Quote Link to comment Share on other sites More sharing options...
Tom Geiger Posted August 8, 2013 Share Posted August 8, 2013 I've gone as far as to open the glove box, but I glued the door in the open position. Quote Link to comment Share on other sites More sharing options...
MikeyB08 Posted August 8, 2013 Author Share Posted August 8, 2013 I contemplated gluing the door open but went on ahead and put myself up for a challenge. I was talking to another modeler and he mentioned that you could use super small Rare Earth Magnets for a "latch". Might be working on that next. Quote Link to comment Share on other sites More sharing options...
Tom Geiger Posted August 8, 2013 Share Posted August 8, 2013 I was talking to another modeler and he mentioned that you could use super small Rare Earth Magnets for a "latch". Might be working on that next. You can get little photo etched keys if you want to try your hand at making a lock! No worries, you did good. Modeling is all about challenging yourself and winning. You did that well! Quote Link to comment Share on other sites More sharing options...
crazyjim Posted August 8, 2013 Share Posted August 8, 2013 That is REALLY cool! I never thought about trying to open a glove box. I like the tickets hanging out idea too. Darn - is this a wonderful place or what? Quote Link to comment Share on other sites More sharing options...
MikeyB08 Posted August 8, 2013 Author Share Posted August 8, 2013 That is REALLY cool! I never thought about trying to open a glove box. I like the tickets hanging out idea too. Darn - is this a wonderful place or what? Indeed it is. Was hoping this would help someone out. Glad you like it. Quote Link to comment Share on other sites More sharing options...
Muscle Posted August 13, 2013 Share Posted August 13, 2013 That is awesome Mikey Quote Link to comment Share on other sites More sharing options...
blunc Posted August 13, 2013 Share Posted August 13, 2013 nice quick-guide/tutorial. I did this to a 240Z kit back in the mid-70's, I got the glovebox hinge made and working but after cutting the car doors open I found that my skills needed to improve a bit before that model could be finished...it's still sitting in a box waiting it's turn "Back on the Bench". Quote Link to comment Share on other sites More sharing options...
Skydime Posted August 15, 2013 Share Posted August 15, 2013 (edited) This is really cool. You did a great job. Being a previous owner of a 94, lemme suggest not putting a cd changer in there. Some people didn't have the problem but, those cars were notorious for the glovebox popping open at rr crossings and potholes. It would be about as realisticly sound as a straight axle through the engine block on a 1:1 . I had to put my changer under the passenger seat. The owner's manual or something would be cool in there just for the full visual affect. Edited August 21, 2013 by Skydime Quote Link to comment Share on other sites More sharing options...
Modelbuilder Mark Posted September 2, 2013 Share Posted September 2, 2013 Way cool way of doing that. Here is a Marlin I built around 1993 or 1994, and opened the glove compartment. Left a cassett tape sitting on the door, and folded up some papaers with a strap in the glovebox, some other interior junk as well. Quote Link to comment Share on other sites More sharing options...
Rockie Posted December 12, 2013 Share Posted December 12, 2013 I've gone as far as to open the glove box, but I glued the door in the open position. GO TO EBAY I BOUGHT TINY MAGNET BUT STRONG, YOU CAN USED THEM TO CLOSE AND OPEN THE G.D. I USE THEM FOR THE DOORS.. Quote Link to comment Share on other sites More sharing options...
Rockie Posted December 12, 2013 Share Posted December 12, 2013 GO TO EBAY I BOUGHT TINY MAGNET BUT STRONG, YOU CAN USED THEM TO CLOSE AND OPEN THE G.D. I USE THEM FOR THE DOORS.. Quote Link to comment Share on other sites More sharing options...
mark wheat Posted August 8, 2014 Share Posted August 8, 2014 i make the lid out of a soft drink can. it's about the right thickness for the scale Quote Link to comment Share on other sites More sharing options...
Dale W. Verts Posted August 8, 2014 Share Posted August 8, 2014 Absolutely killer, sir. Thanks. Dale Quote Link to comment Share on other sites More sharing options...
DynoMight Posted August 8, 2014 Share Posted August 8, 2014 Great job on opening the glove box and thanks for showing the hinges too! Quote Link to comment Share on other sites More sharing options...
SlotDaddy1963 Posted August 10, 2014 Share Posted August 10, 2014 Nice work, James! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.