Casey Posted October 28, 2013 Author Share Posted October 28, 2013 Perfect, Kerry, Thank you. Quote Link to comment Share on other sites More sharing options...
Austin T Posted October 28, 2013 Share Posted October 28, 2013 Imagine going down the road wedged behind a seat sitting on that padded piece of plastic. Doesn't seem like the safest idea. Quote Link to comment Share on other sites More sharing options...
Skydime Posted October 28, 2013 Share Posted October 28, 2013 Imagine going down the road wedged behind a seat sitting on that padded piece of plastic. Doesn't seem like the safest idea. No it sure isn't. I've done it a couple times...and I'm 300 lbs! Although I'm sure that my size ensured i was wedged and wasn't going anywhere. This is just another reason these made great places for an amp rack or small speaker boxes Quote Link to comment Share on other sites More sharing options...
Mike Kucaba Posted October 28, 2013 Share Posted October 28, 2013 Nice work Casey. I had a '92 S-10 Club cab with standard size bed. Nice truck. Sounded great after I went with dual exhaust from the cats back and no mufflers! It eventually succumbed to the ravages of snow & salt in the Chicago area. I did buy a resin cast kit from Perry's. started it and never finished as the truck became worse for wear. Quote Link to comment Share on other sites More sharing options...
goodwin3224 Posted October 28, 2013 Share Posted October 28, 2013 Nice work! Quote Link to comment Share on other sites More sharing options...
DrKerry Posted October 28, 2013 Share Posted October 28, 2013 Perfect, Kerry, Thank you. You are welcome Casey!!! Quote Link to comment Share on other sites More sharing options...
slusher Posted October 29, 2013 Share Posted October 29, 2013 Your doing some really great work on this Casey.... Quote Link to comment Share on other sites More sharing options...
aaronwert Posted October 31, 2013 Share Posted October 31, 2013 Very nice build! Quote Link to comment Share on other sites More sharing options...
Casey Posted October 31, 2013 Author Share Posted October 31, 2013 Thanks, guys. Progress has slowed, but this project is still moving forward. I needed to separate the door panels from the inner quarter panels/jump seat surrounds, so I simply scribed through the recess which was already present, and voila': I looked at bunch of different first gen extended cab pictures and noticed the raised area which runs side-to-side at the back of the cab floor. I added that raised area using some rectangular styrene rod, but it ended up being too tall, so I had to removed it, along with the rear wall of the cab. There were two rectangular blocks in each rear corner which weren't supposed to be there, too, so that gave me another reason to remove the entire rear interior wall and replace it with a slightly thicker piece of sheet styrene. Once the new rear wall was in place, I added the new (and hopefully) more accurate raised area on the floor, then started working on the jump seat surrounds. I got the left side roughed in, but the gap between the seat bottom/trim panel and the surround is a bit too big, so that will get some attention. Here's the seat bottom panel sitting loose in the surround: Here's the entire LR corner area: I worked on the bucket seats, too, scribing the areas between the backs and bottoms deeper, and defining the seat shapes a bit more on the thigh and side bolsters. Once the seats were placed in position inside the interior tub, I realized how little of the seat sides can be seen, so I'm not going too much further with them: Quote Link to comment Share on other sites More sharing options...
Mike Kucaba Posted October 31, 2013 Share Posted October 31, 2013 WOW! That is some FINite detail. I don't think Perry's went into the jump seat detail at all. Great work. Quote Link to comment Share on other sites More sharing options...
DrKerry Posted October 31, 2013 Share Posted October 31, 2013 Nice.... Quote Link to comment Share on other sites More sharing options...
Skydime Posted October 31, 2013 Share Posted October 31, 2013 The jump seats are coming along nicely, Casey. Glad to see an update on this one. Quote Link to comment Share on other sites More sharing options...
charlie8575 Posted November 3, 2013 Share Posted November 3, 2013 Very nice job on this, Casey. Even if you don't get this particular unit cast, you can make another now that you've learned what to (not) do and let those of us lesser beings build these, too! I've toyed with grabbing an early S-10, and I wouldn't mind a long-box at all- just that much more utility. One of the V-6s and an automatic, and I'd be quite happy. Charlie Larkin Quote Link to comment Share on other sites More sharing options...
Wonderbread Kustomz Posted November 3, 2013 Share Posted November 3, 2013 Very impressive Quote Link to comment Share on other sites More sharing options...
Jonathan Posted November 5, 2013 Share Posted November 5, 2013 It's looking great! Quote Link to comment Share on other sites More sharing options...
Jonathan Posted November 14, 2013 Share Posted November 14, 2013 How's this one going? I bet I'm not the only one here who's interested in seeing how far along you've come with this most excellent build! Quote Link to comment Share on other sites More sharing options...
DrKerry Posted November 14, 2013 Share Posted November 14, 2013 Yer not the only one Jonathan!!! LMBO Quote Link to comment Share on other sites More sharing options...
Casey Posted November 14, 2013 Author Share Posted November 14, 2013 How's this one going? Slowly. The underside of the bed is done, but the topside/inner bed still needs some work in a few areas. Quote Link to comment Share on other sites More sharing options...
DrKerry Posted November 14, 2013 Share Posted November 14, 2013 Kool beans.... Quote Link to comment Share on other sites More sharing options...
Jonathan Posted December 12, 2013 Share Posted December 12, 2013 Wonder how this one is turning out? Quote Link to comment Share on other sites More sharing options...
Casey Posted February 18, 2014 Author Share Posted February 18, 2014 Wonder how this one is turning out? Good, I guess. I have the right bedside fully polished, and the bed and left bedside pice are almost done, too. I was unhappy with my previous splicing/patching work on the right inner fender, so an AMT GMC Sonoma gave up its inner fender, and I spliced a section into the S-10's after some reshaping and slicing. I also filled the front framerails and will sand them flat/smooth, then add a thin strip of styrene to ensure the fit flush against the bottom edges of the inner fenders. Monogram's tiny tabs at the bottom of the inner fender, which slipped into the framerail gaps, wasn't a very secure way to join those two areas, so I will have to figure out something. Still not sure what I'll do with the suspension, but the upper A-arms in the kit are atrocious, and the 2WD crossmember with the lower A-arms molded in is not much better. I'm leaning toward AWD or 4WD at this point, but planning to stick with the 4.3L and T5 5-speed manual trans, even if that means fudging the transfer case-to-trans attachment a tad. Quote Link to comment Share on other sites More sharing options...
DrKerry Posted February 18, 2014 Share Posted February 18, 2014 Looks awesome Casey!!!!!! Quote Link to comment Share on other sites More sharing options...
Casey Posted December 30, 2021 Author Share Posted December 30, 2021 (edited) I dug this one out, thinking I might be able to reassess things and possibly make some progress in 2022...we shall see about the latter. I made a few resin longbed bedside pieces a few years ago, only got one useable right and two left sides, and never cast a useable inner bed section...which it turns out is just as well. All three bedside pieces are 5-7% too short and no longer fit the master, so they need to be re-cast. I think I will eliminate the funky alignment thing at the front of each bedside piece anyway. Honestly, not much of any progress to report, hut hopefully that will change soon. Pics of where it's at, and the damaged LH bedside master, which needs attention before it can be reused as a master. Yes, the roof is still a bit concave: Edited December 30, 2021 by Casey Quote Link to comment Share on other sites More sharing options...
Tabbysdaddy Posted December 30, 2021 Share Posted December 30, 2021 That's really cool. I have a couple Monogram S10s to build my regular cab longbed. Quote Link to comment Share on other sites More sharing options...
Jonathan Posted January 3, 2022 Share Posted January 3, 2022 I think a proper S-10 transkit for an extended cab (first generation) would be a great seller. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.