Thatswhatshesaid Posted November 18, 2013 Share Posted November 18, 2013 I've sent Jerry a few emails over the last few months about some decals and have never heard back. Has anyone else had this problem? Quote Link to comment Share on other sites More sharing options...
ap40rocktruck Posted November 18, 2013 Share Posted November 18, 2013 Jerry is in the process of upgrading to a new printer system, please be patient as this is a time consuming and expensive process. My understanding is that the end result will far exceed existing capabilities & print quality. Quote Link to comment Share on other sites More sharing options...
BigBad Posted November 18, 2013 Share Posted November 18, 2013 That is good news, I've got some decals in the past with pinstripe features that were offset and metallic colors that were "chipped" off slightly. Most of the time, I got very good quality stuff though, but for 10 to 12 bucks for a 6x11 inch sheet of paper, I expect top quality material. I'm not the only one seeing this as I have been talking to other guys who just won't order from him anymore. So, good for him for upgrading his machinery. Quote Link to comment Share on other sites More sharing options...
phoneguy Posted November 18, 2013 Share Posted November 18, 2013 Jake, I'm more than happy to answer any questions you have. Sometimes i do forget to replay due to the fact of a full time job and getting caught up on designing and printing. I did go back through my emails and to answer your question, they are based on Knight Transportation. Rick is right--I am in the process of upgrading. I do apologize for not getting back to you until now. Quote Link to comment Share on other sites More sharing options...
phoneguy Posted November 19, 2013 Share Posted November 19, 2013 (edited) That is good news, I've got some decals in the past with pinstripe features that were offset and metallic colors that were "chipped" off slightly. Most of the time, I got very good quality stuff though, but for 10 to 12 bucks for a 6x11 inch sheet of paper, I expect top quality material. I'm not the only one seeing this as I have been talking to other guys who just won't order from him anymore. So, good for him for upgrading his machinery. Robert, I stand by my product. If someone tells me there is an issue with the decals, I do everything I can to make it right. Sometimes decals get sent out that I missed a flaw on, but I will send replacements. As far as the people that won't order from me I say this--If I don't know about the problem, I can't fix it. In no way am I directing this comment to you Robert. after posting this and thinking about it, I didn't want it to seem as though I was angry with you. Edited November 20, 2013 by phoneguy Quote Link to comment Share on other sites More sharing options...
phoneguy Posted November 19, 2013 Share Posted November 19, 2013 And as far as the costs, I do my best to keep the cost affordable, yet being able to continue printing. Quote Link to comment Share on other sites More sharing options...
mistermodel Posted November 20, 2013 Share Posted November 20, 2013 good news Jerry, That is good news, I've got some decals in the past with pinstripe features that were offset and metallic colors that were "chipped" off slightly. Most of the time, I got very good quality stuff though, but for 10 to 12 bucks for a 6x11 inch sheet of paper, I expect top quality material. I'm not the only one seeing this as I have been talking to other guys who just won't order from him anymore. So, good for him for upgrading his machinery. Ive purchased many sets, 20 or so and never a problem.Guess you cant please every one.I know 5 others in person and many from the computer that are always happy with modeltruckin.I have only heard one issue over the internet and that was a paint compatibility issue and that person has used modeltruckin products before and after that so it was an isolated issue Quote Link to comment Share on other sites More sharing options...
richellis Posted November 20, 2013 Share Posted November 20, 2013 Hi Jerry, I was about to drop you an order, would it be best to hold off for a few weeks then? Rich Quote Link to comment Share on other sites More sharing options...
Badluck 13 Posted November 20, 2013 Share Posted November 20, 2013 And as far as the costs, I do my best to keep the cost affordable, yet being able to continue printing. This is just from my personal experience with the dealings I have had with Modeltrucking.com......My opinion for the quality of the decals I have received vs the cost is one heck of a deal,I have seen lesser quality for the same amount if not more.....this is why I only buy from Jerry @ Modeltrucking.com and if he don't have the decals or can't make the ones I want,then I don't need to build that particular one Quote Link to comment Share on other sites More sharing options...
phoneguy Posted November 20, 2013 Share Posted November 20, 2013 Hi Jerry, I was about to drop you an order, would it be best to hold off for a few weeks then? Rich Rich, Hold off until I get back up again. I will make a post when all is good again. Quote Link to comment Share on other sites More sharing options...
Thatswhatshesaid Posted November 23, 2013 Author Share Posted November 23, 2013 Thanks Jerry. Expect an order from me too when you are up and running again. Quote Link to comment Share on other sites More sharing options...
Q tip Posted November 29, 2013 Share Posted November 29, 2013 your decals are great now,cant wait to see them with new equiptment. are you going to have any new options like freightliner striping from the 80's? hint,hint. keep up the good work! Quote Link to comment Share on other sites More sharing options...
BigBad Posted December 7, 2013 Share Posted December 7, 2013 Robert, I stand by my product. If someone tells me there is an issue with the decals, I do everything I can to make it right. Sometimes decals get sent out that I missed a flaw on, but I will send replacements. As far as the people that won't order from me I say this--If I don't know about the problem, I can't fix it. In no way am I directing this comment to you Robert. after posting this and thinking about it, I didn't want it to seem as though I was angry with you. No harm done Jerry. It's not like it's a big deal, they're decals. I just ordered some more. Quote Link to comment Share on other sites More sharing options...
gray07 Posted December 22, 2013 Share Posted December 22, 2013 Do u sell the burlington cabover decals, they were white trucks Quote Link to comment Share on other sites More sharing options...
checkmate Posted December 22, 2013 Share Posted December 22, 2013 I've got a few sets over the past few years and had a pretty good run with them, Decals are really my nemesis and if I can make them look half alright I think they're a good product. Was on the site the other night looking for some more but I'll hold off as well Jerry till you get it sorted. Quote Link to comment Share on other sites More sharing options...
phoneguy Posted December 22, 2013 Share Posted December 22, 2013 I will have to dig thru my files to see if I still have the Burlington files. On a side note, my printers are "supposed" to be on the way back from Japan (after sitting at the repair facility since Oct. 22, so outstanding orders will be printed as soon as possible. I am still in the process of upgrading away from the ALPS to a more reliable system. This time of year lenders can be a bit difficult to deal with. Quote Link to comment Share on other sites More sharing options...
KJ790 Posted December 27, 2013 Share Posted December 27, 2013 Hey Jerry, do you offer just the permit numbers for the side of a cab, like the ones on the top rear of the Kingsway truck on your website? I would print my own, but I cannot print white on clear decal paper. Quote Link to comment Share on other sites More sharing options...
phoneguy Posted December 27, 2013 Share Posted December 27, 2013 Hey Jerry, do you offer just the permit numbers for the side of a cab, like the ones on the top rear of the Kingsway truck on your website? I would print my own, but I cannot print white on clear decal paper. I might have to look into offering them on another detail sheet. Quote Link to comment Share on other sites More sharing options...
KJ790 Posted December 28, 2013 Share Posted December 28, 2013 I might have to look into offering them on another detail sheet. Let me know if you do, I would definitely buy a few sets. Quote Link to comment Share on other sites More sharing options...
phoneguy Posted January 4, 2014 Share Posted January 4, 2014 Finally got the printers back today after sitting in Japan since Oct. 22. Just now able to get started on the backlog of orders and hopefully I will have the samples back on the new printing system and have that up and running very shortly. To everyone that has an outstanding order with me, I am working as fast as the printer can to get your orders out to you. My apologies once again for the long delay with these orders. ---Jerry Quote Link to comment Share on other sites More sharing options...
Mr mopar Posted January 5, 2014 Share Posted January 5, 2014 Thank you Jerry for letting us all know. Doug Quote Link to comment Share on other sites More sharing options...
phoneguy Posted February 12, 2014 Share Posted February 12, 2014 Here's the latest and greatest................. New print system is due to ship out this week.....first payment is due upon receipt and set up.....also have to have insurance due to cost (required by the bank), that initial payment is due as well.......... I am working with someone on the HO stuff to make sure it's scaled correctly. Also working on 1/64 scale, will be adding more in the 1/32 and 1/16 scales Print time will be cut by about 99%, ink (not actually ink) costs will be cut by about 75% (will have a better idea once I've run thru a full set). I may keep the ALPS for certain projects. Even though the cost of the new system is pretty expensive for decals, I should not have to raise the price of the decals. I do hope to be up and running within the next 2 weeks, providing the severe weather in the US doesn't hinder delivery. To sum it all up, I won't have any more downtime like I did recently, turnaround will be a lot better, and I will have more time to work on even more stuff!!! (as if I don't have enough) I wish to thank everyone for their support since I took over almost 4 years ago and look forward to do my best to contribute to this hobby. I also want to thank my "unofficial staff" of spokesmen and the R & D department (the guys taking pics for me). I would name them, but I'm afraid I would leave someone out. Quote Link to comment Share on other sites More sharing options...
Jim B Posted February 12, 2014 Share Posted February 12, 2014 Excellent news, Jerry. I have an order waiting to be submitted, if I can ever finalize it! Quote Link to comment Share on other sites More sharing options...
alangarber Posted February 12, 2014 Share Posted February 12, 2014 Here's the latest and greatest................. New print system is due to ship out this week.....first payment is due upon receipt and set up.....also have to have insurance due to cost (required by the bank), that initial payment is due as well.......... I am working with someone on the HO stuff to make sure it's scaled correctly. Also working on 1/64 scale, will be adding more in the 1/32 and 1/16 scales Print time will be cut by about 99%, ink (not actually ink) costs will be cut by about 75% (will have a better idea once I've run thru a full set). I may keep the ALPS for certain projects. Even though the cost of the new system is pretty expensive for decals, I should not have to raise the price of the decals. I do hope to be up and running within the next 2 weeks, providing the severe weather in the US doesn't hinder delivery. To sum it all up, I won't have any more downtime like I did recently, turnaround will be a lot better, and I will have more time to work on even more stuff!!! (as if I don't have enough) I wish to thank everyone for their support since I took over almost 4 years ago and look forward to do my best to contribute to this hobby. I also want to thank my "unofficial staff" of spokesmen and the R & D department (the guys taking pics for me). I would name them, but I'm afraid I would leave someone out. Printer went down again? I sent a few emails and got no reply. Quote Link to comment Share on other sites More sharing options...
phoneguy Posted February 12, 2014 Share Posted February 12, 2014 Alan, I'm not down--just upgrading to a better and more reliable system. I have a full time job and haven't had a lot of extra time lately. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.