Modelbuilder Mark Posted December 14, 2013 Share Posted December 14, 2013 Just a little back story. While this is not a replica of my father's car, it is inspired by a car he bought at age 16 living in Wise County, VA. The car sat higher than those that would have been in California during the same time period, as there are hollows that the cars had to be able to drive up in, ofter called "hollers" by some folk. It is pretty close to accurate using my conversations with my father and his memories. He bought it from a police auction and it was previously a bootleggers car, and still had a drum/tank in the area where there would be a back seat. As part of the purchase agreement, they had to cut the drum out and return it to the police. My father did not replace the rear seat. The bootlegger already had a Chevy 283 and started some body work. My grandfather taught auto-body, and while he did not give my father any money for the project, my father was given help, and allowed access to all the shop tools and supplies of course. My father was seventeen when he finished the car, and only had it a few months. My grandfather was a good man, but a very stern one. My father got caught racing his car, and my grandfather made my dad sell the car to pay the fines. This is the AMT kit, and while I am not super happy with the build, it will be a good shelf model. Quote Link to comment Share on other sites More sharing options...
slusher Posted December 14, 2013 Share Posted December 14, 2013 Very sharp build Mark. Slick black finish. Quote Link to comment Share on other sites More sharing options...
Albie D Posted December 14, 2013 Share Posted December 14, 2013 Man that's clean.... Quote Link to comment Share on other sites More sharing options...
Chris White Posted December 14, 2013 Share Posted December 14, 2013 really nice build Quote Link to comment Share on other sites More sharing options...
bbowser Posted December 14, 2013 Share Posted December 14, 2013 Great model, and great backstory to go with it. Impressive! Quote Link to comment Share on other sites More sharing options...
cobraman Posted December 14, 2013 Share Posted December 14, 2013 Very nice ! Quote Link to comment Share on other sites More sharing options...
PappyD340 Posted December 14, 2013 Share Posted December 14, 2013 Extremely NICE 40 Ford, looks great! Quote Link to comment Share on other sites More sharing options...
Greg Cullinan Posted December 15, 2013 Share Posted December 15, 2013 Looks great. Shame a 17 year old can't get a hold of something like this nowadays. Sure was a lot of car for your money. I like the stance too. Quote Link to comment Share on other sites More sharing options...
Modelbuilder Mark Posted December 15, 2013 Author Share Posted December 15, 2013 Thanks everyone. I agree, a young guy could do a lot with a little car money back then. It was a fun build.It was my first chop of a 40 Ford, but I am glad I did it. Someday I would like to do a more extreme custom, like the El Matador. Quote Link to comment Share on other sites More sharing options...
crazypainter Posted December 15, 2013 Share Posted December 15, 2013 where did you get that picture of that blue C-Cab show rod-?? -- I never saw that one before---The 40 is real nice. Quote Link to comment Share on other sites More sharing options...
Modelbuilder Mark Posted December 15, 2013 Author Share Posted December 15, 2013 where did you get that picture of that blue C-Cab show rod-?? -- I never saw that one before---The 40 is real nice. Thanks, that pic is from a graphic design that was done by Zombie from Rod and Kulture magazine. It was a spread a couple years ago in their magazine, and inspired a project that I completed a little over a year ago. Here is a link to those pics. Quote Link to comment Share on other sites More sharing options...
Danno Posted December 16, 2013 Share Posted December 16, 2013 Very nice build, Mark! Quote Link to comment Share on other sites More sharing options...
Bernard Kron Posted December 16, 2013 Share Posted December 16, 2013 (edited) Very nice period correct stance and chop. Your dad must be pleased with the spirit of your model, at the very least, and most probably the execution as well. Two things I'm curious about: the bubble skirts which came out real nice, and the tie rod detail on the front suspension. Did you make the skirts, or do I need to give the kit skirts another look, because I don't remember that much contour on them. In any case, they really add to the period look and are very cool. As regards the tie rod detail I don't remember the kit having that. Whether or not you added it, the texture of your undercarriage does a nice job of highlighting the suspension detail. Bravo on a cool build! Edited December 16, 2013 by Bernard Kron Quote Link to comment Share on other sites More sharing options...
Modelbuilder Mark Posted December 16, 2013 Author Share Posted December 16, 2013 Thanks Danno! Giving it to my dad for Christmas. Quote Link to comment Share on other sites More sharing options...
Modelbuilder Mark Posted December 16, 2013 Author Share Posted December 16, 2013 Very nice period correct stance and chop. Your dad must be pleased with the spirit of your model, at the very least, and most probably the execution as well. Two things I'm curious about: the bubble skirts which came out real nice, and the tie rod detail on the front suspension. Did you make the skirts, or do I need to give the kit skirts another look, because I don't remember that much contour on them. In any case, they really add to the period look and are very cool. As regards the tie rod detail I don;t remember the kit having that. Whether or not you added it, the texture of your undercarriage does a nice job of highlighting the suspension detail. Bravo on a cool build! Thanks, the tie rod and front wheel backs are just parts box detail I added to the back of the Pegasus wheels. They are far from correct, but look better to my eye than having nothing there at all. I think they are from a 56 Chevy kit to be honest. The fender skirts are kit pieces that I think are the same as those in the 40 Ford panel truck, the same one that is at Hobby Lobby right now as the Three Stooges kit. Quote Link to comment Share on other sites More sharing options...
Bernard Kron Posted December 16, 2013 Share Posted December 16, 2013 (edited) ... The fender skirts are kit pieces that I think are the same as those in the 40 Ford panel truck, the same one that is at Hobby Lobby right now as the Three Stooges kit. That's one of my favorite parts kits for doing late 40's/early 50's style customs. It comes with baby moons, flipper caps and decent hop up parts for an under hood installation of a Nailhead Buick, as well as the original AMT '40 Ford Coupe/Sedan kits' fender skirts. I have that kit in my stash and will give the skirts a good. hard look. With your shiny paint they come out way more "bubblicious" than I remembered them. I'm planning a chopped AMT '36 Ford from the same period and want some of that bubble over my rear wheels! Edited December 16, 2013 by Bernard Kron Quote Link to comment Share on other sites More sharing options...
João Canas Posted December 16, 2013 Share Posted December 16, 2013 Magnificent build and a great story too! Thanks for sharing! Quote Link to comment Share on other sites More sharing options...
Jantrix Posted December 16, 2013 Share Posted December 16, 2013 A remarkable job. I think Dad will be really impressed and honored. Quote Link to comment Share on other sites More sharing options...
Modelbuilder Mark Posted December 17, 2013 Author Share Posted December 17, 2013 Thanks again everyone. It was fun. If I had more time, I would also do some more detail, like brake lines etc, but Dad will not care. I have it all packed up and ready to take on the plane this week. Quote Link to comment Share on other sites More sharing options...
rv1963 Posted December 17, 2013 Share Posted December 17, 2013 I think it looks great. The good old days when a young man with a little know how could build his own car. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.