ford514 Posted March 3, 2014 Share Posted March 3, 2014 Ira, the spark plugs on them 4.6 ford are in the indentations in the tops of the covers. then they have a coil with a tube like the new efi hemis have. ford calls it a "coil on plug" setup. heres a link, http://www.amazon.com/FORD-COMPLETE-IGNITION-COILS-DG508/dp/B0031ZDU62 looking good btw. being a ford guy i like anything thats powered by ford. Quote Link to comment Share on other sites More sharing options...
Jeremy Jon Posted March 3, 2014 Share Posted March 3, 2014 Great imagination to your build(s) Ira, always very much enjoy watching them develop, bravo! PS Let me know the VW engine from kit is available? Quote Link to comment Share on other sites More sharing options...
Ira Posted March 3, 2014 Author Share Posted March 3, 2014 FROG SCREEN! I bought this Splatter Screen at the Dollar Store. It makes Great Screen for Models. I cut a piece a little larger than the opening. Then I fit it in place and pushed the screen into the opening a little and then I flattened the screen down around the opening. Next I put some Zap-A-Gap around the edges to hold it in place. I also sprinkled some baking powder over the wet glue to hold the screen better. More Coming... Quote Link to comment Share on other sites More sharing options...
Ira Posted March 3, 2014 Author Share Posted March 3, 2014 cool starting to take shape cant waight to see what your futuristic mind makes of this .. this time hehe Thanks Richard! Quote Link to comment Share on other sites More sharing options...
Baugher Garage Posted March 3, 2014 Share Posted March 3, 2014 The Dollar Store is a treasure trove of modeling extras! Looking good Ira! Quote Link to comment Share on other sites More sharing options...
Ira Posted March 4, 2014 Author Share Posted March 4, 2014 Woo hooo! Really 'shaping' up, Ira! Thanks Dan! Quote Link to comment Share on other sites More sharing options...
cschick Posted March 4, 2014 Share Posted March 4, 2014 absolutely amazing Quote Link to comment Share on other sites More sharing options...
Ira Posted March 4, 2014 Author Share Posted March 4, 2014 INTERIOR PANELS! I cut two pieces of sheet plastic to fill the sides of the interior. This gives me a flat area for the doors. Here are the Panels in place. Notice how the Panels fit flush with the door edges. More Coming... Quote Link to comment Share on other sites More sharing options...
Baugher Garage Posted March 4, 2014 Share Posted March 4, 2014 I'm dyin' to see what's going to attach to those hinges at the wheel wells! Frog legs? Quote Link to comment Share on other sites More sharing options...
Ira Posted March 4, 2014 Author Share Posted March 4, 2014 Imagination Raging All the time Thanks Gary! Quote Link to comment Share on other sites More sharing options...
Ira Posted March 5, 2014 Author Share Posted March 5, 2014 (edited) This may well be the best use for a Gran Turismo kit ever to take shape. Thanks Chuck! Here is another Gran Turismo Kitbash I did a while ago, these are Fun Kits... Edited March 5, 2014 by Ira Quote Link to comment Share on other sites More sharing options...
bobthehobbyguy Posted March 5, 2014 Share Posted March 5, 2014 O Thanks Chuck! Here is another Gran Turismo Kitbash I did a while ago... Any build up pictures of this. Quote Link to comment Share on other sites More sharing options...
Ira Posted March 5, 2014 Author Share Posted March 5, 2014 FROG FIREWALL! I made a Paper Template for the Firewall. Then I traced the shape to a piece of plastic and cut it out. After some Fitting & Trimming, here it is in place. Under View! More Coming... Quote Link to comment Share on other sites More sharing options...
DrKerry Posted March 5, 2014 Share Posted March 5, 2014 Kool stuff Quote Link to comment Share on other sites More sharing options...
Ira Posted March 5, 2014 Author Share Posted March 5, 2014 Great engine Ira, Thanks Carl! Quote Link to comment Share on other sites More sharing options...
Ira Posted March 5, 2014 Author Share Posted March 5, 2014 Ira, the spark plugs on them 4.6 ford are in the indentations in the tops of the covers. then they have a coil with a tube like the new efi hemis have. ford calls it a "coil on plug" setup. heres a link, http://www.amazon.com/FORD-COMPLETE-IGNITION-COILS-DG508/dp/B0031ZDU62 looking good btw. being a ford guy i like anything thats powered by ford. Thanks for the Info Kevin! Quote Link to comment Share on other sites More sharing options...
Ira Posted March 5, 2014 Author Share Posted March 5, 2014 Great imagination to your build(s) Ira, always very much enjoy watching them develop, bravo! PS Let me know the VW engine from kit is available? Thanks Jeremy! Quote Link to comment Share on other sites More sharing options...
Ira Posted March 6, 2014 Author Share Posted March 6, 2014 FILLING IN THE HOLE! I made file card Templates for part of the open area on the rear deck. Then I traced the shape on to plastic twice and cut them out. Here is one of the plastic pieces glued in place. Here are both pieces glued in place. More Coming... Quote Link to comment Share on other sites More sharing options...
Ira Posted March 6, 2014 Author Share Posted March 6, 2014 The Dollar Store is a treasure trove of modeling extras! Looking good Ira! Thanks Mike! Yeah, Lights, Wires, Q-Tips, Beer Nuts, all kinds of stuff... Quote Link to comment Share on other sites More sharing options...
Ira Posted March 7, 2014 Author Share Posted March 7, 2014 absolutely amazing Thanks Cory! Quote Link to comment Share on other sites More sharing options...
Ira Posted March 7, 2014 Author Share Posted March 7, 2014 TWO MORE STRIPS! I trimmed the edge of the strip on an angle and fit it in place and then made a second strip to fit. Here are the two strips glued in place. I forgot to mention that I enlarged the opening to clear the Engine. You can see the marks where I did the Cutting. Rear View! More Coming... Quote Link to comment Share on other sites More sharing options...
Davewilly Posted March 7, 2014 Share Posted March 7, 2014 looking pretty slick Ira! Quote Link to comment Share on other sites More sharing options...
Ira Posted March 8, 2014 Author Share Posted March 8, 2014 I'm dyin' to see what's going to attach to those hinges at the wheel wells! Frog legs? Frog Legs would be Fun! Quote Link to comment Share on other sites More sharing options...
Ira Posted March 8, 2014 Author Share Posted March 8, 2014 O Any build up pictures of this. Yes, this is the SilhouVette! Here is a link to the page: http://www.sonic.net/~joymkrs/Dahm/ASIL.html I also have a new Link for my Website, it is: www.iradahm.com Quote Link to comment Share on other sites More sharing options...
bobthehobbyguy Posted March 8, 2014 Share Posted March 8, 2014 Great pages Ira. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.