mnwildpunk Posted May 31, 2014 Posted May 31, 2014 (edited) I´ve preordered one aswell. With shipping to Germany this is still a better deal than buying the kit in Germany. The AMT truck kits here are $70 - $80, shipping not included. I buy pretty much everything from the States. If there is a truck model on ebay.com for $109, it will cost 109 on ebay.de. 109 is almost $150. Everyone probably knows the old AMT ´72 Nova which was just rereleased as the Beverly Hills Cop Nova. I´ve seen them offered here for 34 ($47) which is nothing short of ridiculous. Do you Americans have the slightest idea about how spoiled you are regarding kit prices? I hope so!!! BTW... Where can I find accurate resin 5-hole wheels in a good quality for the Duel truck? Any suggestions? to tell you honestly I do I have ordered parts from down under before and it made me feel very lucky AMT,REVELL, MOBIOUS, MODEL KING and orthers are state side well sort of Edited May 31, 2014 by mnwildpunk
Luc Janssens Posted May 31, 2014 Posted May 31, 2014 to tell you honestly I do I have ordered parts from down under before and it made me feel very lucky AMT,REVELL, MOBIOUS, MODEL KING and orthers are state side well sort of Part of the problem for us Europeans is that US manufacturers do the warehousing and groupage stateside and not in China. Most likely its cheaper for them shipping wise and the numbers sold in Europe too insignificant to change their way. I see now that a Aoshima wheels set is cheaper here then a Amt tire set....... Oh well.. good I'm up for adoption LOL
Stuntman Mike Posted May 31, 2014 Posted May 31, 2014 Yes, a set of the AMT Polyglass tires usually goes for 19,95 Euros in Germany and there is no shipping included. That´s more than $27. For $33 I get two sets shipped from the states. I´m up for adoption aswell.
Bowtienutz Posted June 1, 2014 Posted June 1, 2014 (edited) How easy it it for european's to do business across borders to Romania? I'm looking to get some model truck items from Dan's models there. Very hard to get here in the states other than evilbay. Would one of my prospective adopties be interested into looking into this for me. I can make it worth your time and effort. Drop me a PM. Edited June 1, 2014 by Bowtienutz
Stuntman Mike Posted June 1, 2014 Posted June 1, 2014 (edited) How easy it it for european's to do business across borders to Romania? I'm looking to get some model truck items from Dan's models there. Very hard to get here in the states other than evilbay. Would one of my prospective adopties be interested into looking into this for me. I can make it worth your time and effort. Drop me a PM. Wouldn´t it be easier for you to contact DanModels directly or via evilbay? If I order stuff from Romania and have it shipped to Germany, there would be shipping cost and with bad luck some additional dollars for customs clearance. Shipping to the States from Germany is pretty expensive aswell. So it´ll be double shipping cost and maybe more due to German customs issues. Edited June 1, 2014 by Stuntman Mike
mnwildpunk Posted June 3, 2014 Posted June 3, 2014 Sorry guys I have my hands full with the kid I have
Old Buckaroo Posted June 12, 2014 Posted June 12, 2014 Yippeeeee ! Tower has them in stock http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXEHMD&P=W
Diesel Jockey Posted June 17, 2014 Posted June 17, 2014 (edited) Received notification from Model Car Mountain that my kits have been shipped and are on their way. Edited June 17, 2014 by Diesel Jockey
Mr mopar Posted June 19, 2014 Posted June 19, 2014 Anyone got one that they can show whats in the box? Hope the tinted glass is in the box.
bob terry Posted June 19, 2014 Posted June 19, 2014 No tinted glass. I have received 2 and I hear they are selling out fast.
Mr mopar Posted June 20, 2014 Posted June 20, 2014 No tinted glass. I have received 2 and I hear they are selling out fast. that's a bu%#er no tinted glass, Thank Bobby
tim boyd Posted June 20, 2014 Posted June 20, 2014 Anyone got one that they can show whats in the box? Hope the tinted glass is in the box. OK team, here's a 27-photo review and commentary on the Round 2 reissue of this iconic truck model kit, including a detailed comparison with the original T-500 kit dating from August, 1969. Make sure to use the "Roll" feature so you can view my comments (and add your own if desire) as you look at the images.....thanks for looking....TIM http://public.fotki.com/funman1712/first-look-at-all-n/new-amt-t500-califo/
Bennyg Posted June 20, 2014 Posted June 20, 2014 Thanks Tim. Great work on the photos and history. Ben
Mr mopar Posted June 20, 2014 Posted June 20, 2014 Yes Thank you Tim that is what I needed to see....................... I still can't figure out why the Green tinted glass was not included ,sure would have made this kit even that much better.
Jim B Posted June 20, 2014 Posted June 20, 2014 Thanks for the review, Tim. Now I really want to pick up this kit.
Brett Barrow Posted June 20, 2014 Posted June 20, 2014 Thanks for the review. Nice to see there's little flash, Round 2 seems to have been getting better with some of their recent ones. My 40 Willys was covered in it, but the 36 Ford had practically none. I've never built a truck model before, but I'm seriously thinking of picking one of these up. Might as well start with the one that started it all! BTW the Car Model article Tim references can be viewed online at the Model Encyclopedia website. It includes instructions on how to make the steering workable and also how to scratchbuild a sleeper. http://www.modelencyclopedia.com/magazines.php?MagId=123&PageNum=27
tim boyd Posted June 20, 2014 Posted June 20, 2014 Thanks for the review. Nice to see there's little flash, Round 2 seems to have been getting better with some of their recent ones. My 40 Willys was covered in it, but the 36 Ford had practically none. I've never built a truck model before, but I'm seriously thinking of picking one of these up. Might as well start with the one that started it all! BTW the Car Model article Tim references can be viewed online at the Model Encyclopedia website. It includes instructions on how to make the steering workable and also how to scratchbuild a sleeper. http://www.modelencyclopedia.com/magazines.php?MagId=123&PageNum=27 Brett...I had the exact same experience as you regarding flash on the '40 Willys and '36 Ford kits. The California Hauler is nearly perfect - the only flash I found at all was on one of the parts runners. Thanks for posting the link to the Car Model article - I pulled out my old copy and re-read it this morning. While this link doesn't show the issue's cover photo, Phil painted his PB in '57 Chevy Tropical Turquoise (he called it '58 - I haven't checked yet to see if the color carried over) and '64 Ford Wimbledon White. Of course, these are both exact match aerosol colors in Testors Model Masters Lacquer paint can lineup... TB .
tim boyd Posted June 21, 2014 Posted June 21, 2014 so the sleeper is in is kit too There is no sleeper in the new issue. I illustrated it with parts from the second (c. 1973) reissue of the original California Hauler, so you could see what you are missing. On my Fotki site, Tim Ahlborn reports Round 2 is going to do a plated Mercury sleeper as a Parts Pack offering in Q4 2014. Now that rocks! TIM
Mr mopar Posted June 21, 2014 Posted June 21, 2014 I'm with James on that one , a Mercury sleeper looks killer on this Peterbilt !
Petetrucker07 Posted June 21, 2014 Posted June 21, 2014 Bought 2 today, 1s gonna be my 1st attempt at a "normal" work truck and the other is gonna get stretched and customized.
Lordmodelbuilder Posted June 26, 2014 Posted June 26, 2014 I just received my order from Model Roundup. The 359 boxes look like a truck drove over them. Will open em up tomorrow and hopefully no damage was done. Orderd 2 of these, the cabover and 2 KW cabovers. Never had any of them except for the cabover in my childhood. Actually the 359 wrecker was one of my first builds in the 70's. Looking forward to putting the pete together and I just happen to have the old sleeper to go on it.
Old Buckaroo Posted June 26, 2014 Posted June 26, 2014 I just received my order from Model Roundup. The 359 boxes look like a truck drove over them. Will open em up tomorrow and hopefully no damage was done. Sorry to hear they look like that, hopefully all is good. Would that be UPS or the US Postal System that can take credit for that ? The last 7-8 packages I have gotten have all been damaged. I have quit ordering stuff I am so disgusted with the US Postal handing. Nothing worse then shelling out big bucks and the anticipation of waiting for it to show up , only find out it has been broken in transit.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now