martinfan5 Posted April 13, 2015 Share Posted April 13, 2015 I was not able to meet some of you , and I am not sure if I should say this, but I was the one that was in charge of the audio for the show, I was the talking head that took over for Dan doing the raffle prizes. I encountered some technical issues that prevented back ground music that was planned for the show. And those issues delayed the start of the raffle prize drawings, and thanks to Brad for lending his voice and getting it started while I sorted out the issues. Quote Link to comment Share on other sites More sharing options...
Modelbuilder Mark Posted April 14, 2015 Share Posted April 14, 2015 Earlier someone asked if there was a way to call out the MCM folks. Maybe next year we can make an effort to have a group photo of the MCM folks in attendance. Put some names and faces together for those of us that missed each other. I did get a chance to talk with some folks tho, and saw some of the fine works of art up close and in person. Thanks to everyone for bringing out their models. Quote Link to comment Share on other sites More sharing options...
martinfan5 Posted April 14, 2015 Share Posted April 14, 2015 Mark, there was a plan in place for that, I was going to try an announce doing a meet and greet , but with all the issues with the audio, it just honestly slipped my mind. Quote Link to comment Share on other sites More sharing options...
Modelbuilder Mark Posted April 14, 2015 Share Posted April 14, 2015 That is OK, I think this new event will only continue to get better. Quote Link to comment Share on other sites More sharing options...
blunc Posted April 14, 2015 Share Posted April 14, 2015 Getting to see in person all the fantastic creations seen in these forums was a treat for me. I enjoyed chatting with Randy, Mark, Brad and the other local club guys that I rarely get a chance to see. Quote Link to comment Share on other sites More sharing options...
56bowtieguy Posted April 14, 2015 Share Posted April 14, 2015 (edited) Well, the builder formally known as "Back Seat Bob" and I got back late last night, and now that I'm rested up a bit I wanted to take a minute to Thank all those involved in the show. I've been going to this show for several years now and have yet to come back disappointed. Dan, Bernie, and everyone else in the Cactus Car Modelers and Moonlight Modelers have made us feel like family. For those who have wanted to attend, and haven't yet, you are missing out one one good time. It was great seeing some of the friends I've made there. Brad, Chris, Johnny Southside, Art, Paul, Had fun at breakfast. See you guys next year (if not sooner). Edited April 14, 2015 by 56bowtieguy Quote Link to comment Share on other sites More sharing options...
Mike Kucaba Posted April 14, 2015 Share Posted April 14, 2015 Here is a link to the photo's I took of the show. http://smg.photobucket.com/user/darkrapid/library/Desert%20Scale%20Classic%202015?sort=9&page=1 RATS! I was stuck by my tables and missed looking at all the great models! Quote Link to comment Share on other sites More sharing options...
Art Laski Posted April 14, 2015 Share Posted April 14, 2015 To echo everyone's sentiments, my wife and I really had a great time as well. Seeing our desert buddies is always a treat, and getting to meet Randy D. was a pleasure. Man, are his creations masterful! But there were a lot of stunning builds out there as well. The whole Cactus Modelers club did such a great job and vending went very well also. Thanks to everybody who picked up some of Pro Tech Charlie's great parts from me. I really did appreciate it. Looking forward to next year! -Art Quote Link to comment Share on other sites More sharing options...
gasser59 Posted April 14, 2015 Share Posted April 14, 2015 You bet Art. Glad you're now a ProTech vendor and I was able to see the products before purchasing. I've heard his stuff is the best out there and now I'd have to agree. Your Stephanie's Rose, Corvette and other builds were flawless and exquisite masterpieces. I always enjoy viewing your creations. Quote Link to comment Share on other sites More sharing options...
Art Laski Posted April 15, 2015 Share Posted April 15, 2015 Thanks, Brad! Being at the table most of the day, there's a lot I didn't get to see, but I'm really glad I got to see the Scout. The details in that are so cool! I can't wait to see you finish it. Quote Link to comment Share on other sites More sharing options...
Tim Pentecost Posted April 15, 2015 Share Posted April 15, 2015 Well, BLAH_BLAH_BLAH_BLAH, I knew I was gonna miss out on seeing some great builds. I especially wanted to see John's Corvette boat. I'll catch it at GSL in a couple of weeks. Eugene Curin's tractor was another that I wanted to see. I absolutely LOVE being retired, but the "fixed income" part just kills me when I have to make some tough decisions. There are some that are easier than others, though!! Yikes!!! TimP Quote Link to comment Share on other sites More sharing options...
Tim Pentecost Posted April 15, 2015 Share Posted April 15, 2015 WOW, the Blah Blah Blah wasn't put in there by me. It originally was, "Well, C-R-A-P" Hope that comes through this time. Quote Link to comment Share on other sites More sharing options...
Danno Posted April 15, 2015 Author Share Posted April 15, 2015 Well, BLAH_BLAH_BLAH_BLAH, I knew I was gonna miss out on seeing some great builds. I especially wanted to see John's Corvette boat. I'll catch it at GSL in a couple of weeks. Eugene Curin's tractor was another that I wanted to see. I absolutely LOVE being retired, but the "fixed income" part just kills me when I have to make some tough decisions. There are some that are easier than others, though!! Yikes!!! TimP We realllly missed you, Tim! It just wasn't the same without Paula and you being there. {And Symonds had his run of the raffle!} Quote Link to comment Share on other sites More sharing options...
Petetrucker07 Posted April 15, 2015 Share Posted April 15, 2015 I just can't believe my schedule is working out this way. I missed the show by half a day. Now I'm running local out in Arizona to help out Pioneer sand this week. I hope to get a chance to swing into HobbyTown and look around and get over to Hobby Depot. I have stuff on hold over there. Looks like I missed 1 helluva show. I'm gonna everything I can to be there next year. Quote Link to comment Share on other sites More sharing options...
Tim Pentecost Posted April 15, 2015 Share Posted April 15, 2015 We realllly missed you, Tim! It just wasn't the same without Paula and you being there. {And Symonds had his run of the raffle!} Dang it!! I should have known he'd take advantage that!! Hope to see you in Salt Lake then.TimP Quote Link to comment Share on other sites More sharing options...
AzTom Posted April 16, 2015 Share Posted April 16, 2015 Tim, I missed you too. Hope to see you next year. I wish I had had more time to view the models. I only got a few photos this year. Quote Link to comment Share on other sites More sharing options...
Tim Pentecost Posted April 17, 2015 Share Posted April 17, 2015 Tim, I missed you too. Hope to see you next year. I wish I had had more time to view the models. I only got a few photos this year. Hey Tom,Count on it, I'll be there! This will be my last GSL trip, so I won't have the time and money of that hanging over me. I truly want to do more "local" stuff. Limit myself to S.Cal, Colorado, New Mexico, maybe Nevada.I think I may be going through "model menopause". YIKES, not sure what that means!!!! LMAOTimmy Quote Link to comment Share on other sites More sharing options...
Metalmad Posted April 18, 2015 Share Posted April 18, 2015 Sounds like this is another good show that I would like to attend so hopefully next year I can arrange my schedule to possible make it. I know the GSL is right around the corner also which this is on the top of my bucket list but I would like to get a few more builds under my belt before I make plans to attend the show. Quote Link to comment Share on other sites More sharing options...
AzTom Posted April 19, 2015 Share Posted April 19, 2015 My big concern about this location would be, if we had a storm like we had a few years ago, it could be a disaster. Quote Link to comment Share on other sites More sharing options...
Danno Posted April 19, 2015 Author Share Posted April 19, 2015 My big concern about this location would be, if we had a storm like we had a few years ago, it could be a disaster. Tom, The roof situation was only a temporary fix - the final, fixed structure could not be in place by the event date. It will be by next year. {We watched the weather reports VERY closely and had a 'Plan B' in event of moisture.} Quote Link to comment Share on other sites More sharing options...
AzTom Posted April 20, 2015 Share Posted April 20, 2015 Thanks Danno. Sales were up so all is good,lol It seemed to by rather fast and I didn't get to play as much as usual. I hope to be back to the building track for next year. Quote Link to comment Share on other sites More sharing options...
Danno Posted April 20, 2015 Author Share Posted April 20, 2015 Most of the vendors ~ at least the ones I've spoken with ~ have indicated it was a successful event with good results. Some have indicated it was far better than that. All of that is great news. It's always a challenge to move to a new venue. We're very glad the feedback has been so positive. Next year will be even greater!! Quote Link to comment Share on other sites More sharing options...
Petetrucker07 Posted April 20, 2015 Share Posted April 20, 2015 I'm gonna go out on a limb, I WILL be there next year. I gotta be there to represent the heavy commercial catagory. I'll bring some just to display, not compete and a few to compete. I went by venue Wednesday last week. I was very impressed by the facility. I had to save my pennies so I could buy a few things that Ed at Hobby Depot had on hold for me, other wise I would've spent more than I did that day. Lookin forward to next year. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.