Jump to content
Model Cars Magazine Forum

66 chevelle


Bluemiles22

Recommended Posts

Thanks guys! Russ I don't really have a lot of info on dirt modeler as this was the first product I've ever used from them. But from what I did get I can say the detail on the parts is great. Pretty sure there's a link to the website in the aftermarket directory. The auto air has a bit of a learning curve to it, but I think with a little bit of practice you can get a great result. I think I stripped the paint off this one three times before I got it looking decent. I did however have trouble wet sanding before I put clear coat on which I wasn't too crazy about.

Link to comment
Share on other sites

  • 2 weeks later...

Just a quick update, I got the engine in the chassis after a little bit of a fight. I had to take some material off of the frame rails and the insides of the upper A arms and also bend the exhaust manifolds in with some heat. Then I had to take some material off of the inner fender wells to clear the engine. Nothing too extreme so far but still a little bit of a pain. The hood finally got clear coat on it which should be polished out today. Exhaust was added but I broke off the tail pipes on accident so those have to get fixed. I added some coil over shocks from vcg resin on the back, which may have to get moved in I'm not too sure yet. Just have to add a drive shaft and a few other things and then final assembly. Thanks for looking.

55B4677B-6ECB-4D43-9CCE-22518BF48D4F-332

7E3BDFF8-A27B-45A3-B5DF-A7A1222820A4-332

2EA94B15-0CC5-47B0-B903-A33E8AE06A61-332

8469DDAB-7F02-4B4A-B75A-9D30511D7332-332

Edited by Bluemiles22
Link to comment
Share on other sites

Thank you guys, most of my builds wind being painted some kind of blue. I should probably try to switch it up next time lol.

Left on my own, all my models would be the same color. Every time I start a project, I see it in medium metallic blue, or lately that awesome orange metallic. So I literally toss out the spray can when I finish a model so that I don't use the very same color again.

Link to comment
Share on other sites

Left on my own, all my models would be the same color. Every time I start a project, I see it in medium metallic blue, or lately that awesome orange metallic. So I literally toss out the spray can when I finish a model so that I don't use the very same color again.

Yup it's just something about blue, I have plenty of other colored paint too but I always come back to the blue. Next couple of builds I'm gonna force myself to do something different, I have not one green build so I think it's about time for one lol.

Link to comment
Share on other sites

Yup it's just something about blue,

Pull up a chair, it's charming story time! Way back in the last century, I had a 1960 Buick Electra with classic car insurance on it. I got a cancellation notice saying that I had broken the rules because I was using the car as my daily driver. That was funny because the car was buried in my garage with stuff piled on top of it. The company said it had the right to investigate me by any means they had available to them. So I called. They told me in a phone interview with Mrs. xx xx (my next door neighbor) she identified that I drove "the blue car" to work every day. I had to laugh out loud because I looked out my window and there was... my blue 1991 Nissan Stanza (my wife's daily driver), my blue 1973 Plymouth Scamp (my daily driver), my blue 1973 Barracuda, my blue 1978 Dodge Sportsman van.. and of course my blue 1960 Buick which was buried in the garage.

So I took a photo of my fleet, a photo of my garage door open with the Buick buried in stuff, and sent it all off to the insurance company demanding that they reinstate my insurance immediately AND find a more reliable interviewer to investigate people. I got a new card in the mail almost immediately! And the funny part... it was the first time I realized that all our cars were blue!

Link to comment
Share on other sites

Thanks guys! I decided to go with mikes wheels and tires instead of the set from pegasus, they looked a little too small and I didn't like the way the car sat. The wheel in the picture was shot with testors gun metal metalizer, still not sure if I wanna go with that color or maybe chrome. Maybe candy blue. Uh oh.... The blue temptation is creeping back in my head lol.

Link to comment
Share on other sites

Rich, they look killer in gun metal ... just sayin' :D Great work going on here.

Thanks mike! The wheels are prepped and ready for paint so I should have those done shortly. I may have to modify the inner fenders on the front to get them to tuck up in the body a little more, the nose looks like it sits just a tad too high right now. I started to put together the grill and headlights, and also got started on adding hood pins. Just have to figure out where to put the straight pins and I'm set. These will actually be functioning hood pins so hopefully everything lines up the right way. Also have a tiny chip in the paint which has to be touched up, there's no way I'm stripping the paint off the hood again this time lol.

A3295CB6-3756-4C54-B5F0-6B453469809F-720

1F065CF1-98BD-4456-9270-142BBDD5BB45-720

Link to comment
Share on other sites

Nice job on the model, I grew up working on my Mom's Chevelle, just wish I noticed this sooner, the door arm rests are chrome with panel color pads.

It was just a lady's go to church car, Aztec bronze, black interior, 283 w/power slush

greg

Link to comment
Share on other sites

Hey rick could you post were I can go on the dirt modeler site , so I can have some of those bitch'in willwood calipers & discs for my 70 camaro Baldwin motion. Any help from any one on how to navigate dirt's website.

Thanks. Jaftygas

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...