Casey Posted November 21, 2018 Share Posted November 21, 2018 (edited) Should be out within the next two months or so. Excellent choice for the box art. Edited February 15, 2022 by Casey Quote Link to comment Share on other sites More sharing options...
68shortfleet Posted November 21, 2018 Share Posted November 21, 2018 Oh man, I'll need another one of these. Hopefully it's molded in white this time. Quote Link to comment Share on other sites More sharing options...
thatz4u Posted November 21, 2018 Share Posted November 21, 2018 1 minute ago, 68shortfleet said: Oh man, I'll need another one of these. Hopefully it's molded in white this time. without excess flash also Quote Link to comment Share on other sites More sharing options...
68shortfleet Posted November 21, 2018 Share Posted November 21, 2018 3 minutes ago, thatz4u said: without excess flash also That would be a nice bonus. But I would rather deal with flash, then have to overcome red plastic, or than terrible tan plastic that seems like it just keep soaking up primer. Quote Link to comment Share on other sites More sharing options...
thatz4u Posted November 21, 2018 Share Posted November 21, 2018 Just now, 68shortfleet said: That would be a nice bonus. But I would rather deal with flash, then have to overcome red plastic, or than terrible tan plastic that seems like it just keep soaking up primer. agreed Quote Link to comment Share on other sites More sharing options...
5500 Posted November 22, 2018 Share Posted November 22, 2018 Wow, that box art excites me about the same as it did over 50 years ago when I bought my first one. This nostalgic box art thing is great marketing... will have to pick one up! Quote Link to comment Share on other sites More sharing options...
stavanzer Posted November 22, 2018 Share Posted November 22, 2018 Despite having 4 of the Lindberg Kits in the stash (3 Yellow, 1 tan) I'll need this one. Can't wait to see the decals for this one. Quote Link to comment Share on other sites More sharing options...
tim boyd Posted November 22, 2018 Share Posted November 22, 2018 Thanks Casey....have been wondering when this one would break cover...….TIM Quote Link to comment Share on other sites More sharing options...
Lordmodelbuilder Posted November 22, 2018 Share Posted November 22, 2018 So nice to see this truck come back. I built one in 1974,and sadly made a rat rod out of it in the 2000's. I will buy a couple & redo it like the 1974 box art. Quote Link to comment Share on other sites More sharing options...
Richard Bartrop Posted November 22, 2018 Share Posted November 22, 2018 The LHS still had some on the shelves a few months back, so I picked on up. I probably saved $20 this way, and I have a use in mind for the billet wheels that came with the kit. Quote Link to comment Share on other sites More sharing options...
Robberbaron Posted November 23, 2018 Share Posted November 23, 2018 (edited) On 11/21/2018 at 2:37 PM, Casey said: Should be out within the next two months or so. Excellent choice for the box art. Interesting, not quite a 100% pure reissue of the original. Looks like chrome reverse rims will be provided instead of original wheel covers. Guessing it will probably be the same rims provided in the 1936 Ford 3-window reissue from a few years ago? I'm sure a few people will be disappointed, but honestly I suspect the vast majority of purchasers will prefer these. Aside from the original wheel covers, were there any other optional parts that were lost to time and not included in the Lindberg reissues? Edited November 23, 2018 by Robberbaron Quote Link to comment Share on other sites More sharing options...
Casey Posted November 23, 2018 Author Share Posted November 23, 2018 36 minutes ago, Robberbaron said: Interesting, not quite a 100% pure reissue of the original. Looks like chrome reverse rims will be provided instead of original wheel covers. Guessing it will probably be the same rims provided in the 1936 Ford 3-window reissue from a few years ago? I'm sure a few people will be disappointed, but honestly I suspect the vast majority of purchasers will prefer these. Maybe they'll be the same tires included in the '53 Ford pickup reissue from 2015? Not sure if Round2 will include a set of four wide whites and another six blackwall tires, though: I would be surprised if one single person laments the loss of those full wheel covers. Quote Link to comment Share on other sites More sharing options...
Richard Bartrop Posted November 23, 2018 Share Posted November 23, 2018 2 hours ago, Casey said: I would be surprised if one single person laments the loss of those full wheel covers. Oh, I'm sure somebody will. I certainly won't be one of them. Quote Link to comment Share on other sites More sharing options...
Vince Nemanic Posted November 23, 2018 Share Posted November 23, 2018 Consider yourself surprised, Casey! Why have all of the vintage decals & stuff if you can't replicate the OI box art? Quote Link to comment Share on other sites More sharing options...
maxwell48098 Posted November 24, 2018 Share Posted November 24, 2018 Of course the good thing about this release is that they'll be using the polished molds that give the plastic its shine. That would be great for novice builders who still don't paint their kit bodies. A.J. Quote Link to comment Share on other sites More sharing options...
Casey Posted December 3, 2018 Author Share Posted December 3, 2018 (edited) On 11/22/2018 at 6:52 PM, Robberbaron said: Interesting, not quite a 100% pure reissue of the original. Looks like chrome reverse rims will be provided instead of original wheel covers. Guessing it will probably be the same rims provided in the 1936 Ford 3-window reissue from a few years ago? Hmmm, maybe, but not sure they are a close match for what's shown on the new box art...maybe it doesn't need to match that closely, though. Edited February 15, 2022 by Casey Quote Link to comment Share on other sites More sharing options...
Robberbaron Posted December 4, 2018 Share Posted December 4, 2018 (edited) 9 hours ago, Casey said: Hmmm, maybe, but not sure they are a close match for what's shown on the new box art...maybe it doesn't need to match that closely, though. Here's a pic of the AMT '36 Ford 'chrome reverse' wheels from Tim Boyd's review of that kit: The modern era AMT Ala Kart kit didn't include a stand-alone set of chrome plated steel wheels, so I don't think those'll be included, despite having what appear to be bullet-style center caps which match the '34 Ford Pickup's box art wheels: I'll admit I didn't notice the bullet center caps on the new box art. Since Round 2 had to change the box art, I'd be (a bit) surprised if they didn't show what's actually going to be in the box. So my reckless speculation was probably way off base ? The other obvious factor I didn't think about till now is that with the side-mount spare, they can't just throw a set of four wheels in from a different kit. So pretty much no way they're throwing the wheels from the '36 into this kit. Edited December 4, 2018 by Robberbaron Quote Link to comment Share on other sites More sharing options...
unclescott58 Posted December 6, 2018 Share Posted December 6, 2018 I've been waiting for awhile for this one to come back as an AMT kit. Lindberg's box art was enough to keep me away. Quote Link to comment Share on other sites More sharing options...
Casey Posted December 26, 2018 Author Share Posted December 26, 2018 (edited) Comparing 196..4? and 2018 instruction sheets, we can see which geegaws have been lost over time. Vintage '60s sheet: 2018 re-issue sheet, with the flares, adjustable wrench, and lug wrench, fire extinguisher, and one gas can no longer present: Edited February 15, 2022 by Casey Quote Link to comment Share on other sites More sharing options...
Toner283 Posted December 27, 2018 Share Posted December 27, 2018 Pretty sure that the bed cover was in the issue from lindberg that was molded in yellow. Not sure about any of the other issues. Here is hoping that the "lost" parts can be restored by merely opening some blocked off sprue runners. Quote Link to comment Share on other sites More sharing options...
tim boyd Posted December 28, 2018 Share Posted December 28, 2018 (edited) OK guys, just got a look at the final release an hour or two ago. Of the "missing" parts Casey shows above, the only flares and the fire extinguisher appear to be missing in the new kit. The cement blocks, tire rack, and gas can are on a separately packaged runner (non-plated), while the jack and the trophy top (a miniature 1934 Ford pickup) are on a second, separately packaged small runner of plated parts. And yes the tonneau cover is there as well. The instruction sheet is a rebop of the original c.1962/3 AMT Trophy Series sheet; of the page Casey showed above only the fire extinguisher and flares are missing from the instruction sheet. The instruction sheet also includes the "Kustomizing Hints" attributed to George Barris from the original kit release. The chrome reverse wheels are on a new, separately packaged plated tree; they are slightly simplified in detail vs. the 1936 Ford Round2 kit parts illustrated earlier in this thread. Five wheels are provided (including one for the fender mounted spare). The 1980's style pseudo billet wheels from the Lindberg releases are still there on the large plated parts tree, but not mentioned in the instructions. The decal sheet appears to be largely an enhanced rebop of the original....I believe the colors for the Ford service oval are new on this sheet vs. the original. The tires are five pad printed wide whitewalls. The box itself as illustrated above, is of the typical large Round 2 size, not the narrow/smaller size of the Trophy Series original. The kit is molded in white styrene. Nice to have this kit back in circulation; with some of the original flavor restored, too! TIM Edited December 28, 2018 by tim boyd Quote Link to comment Share on other sites More sharing options...
68shortfleet Posted December 29, 2018 Share Posted December 29, 2018 13 hours ago, tim boyd said: Nice to have this kit back in circulation; with some of the original flavor restored, too! TIM And molded in white. Is this the very first time this kit has been molded in white? Quote Link to comment Share on other sites More sharing options...
tom q vaxy Posted December 29, 2018 Share Posted December 29, 2018 I may have missed: is it molded white or another color? Quote Link to comment Share on other sites More sharing options...
tim boyd Posted December 29, 2018 Share Posted December 29, 2018 2 hours ago, tom q vaxy said: I may have missed: is it molded white or another color? Tom....see my post just above.....TIM Quote Link to comment Share on other sites More sharing options...
tom q vaxy Posted December 29, 2018 Share Posted December 29, 2018 oops; thx Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.