Kit Karson Posted November 29, 2022 Author Posted November 29, 2022 Took a header break to play with the S.Co.T. Blower... S.Co.T. - Supercharger Company of Turin (Torino), Italy Revell Model A Dual Karb Manifold... Single Barrel Karbs from the Revell Model A... Fuel Log from the parts box unknown source... Stacks from the AMT Beverly Hillbillies kit will become screened velocity air cleaners... Let's mock it up... More drilling & pinning... Cut down the stacks... It's going to look nice... A bit too shinny? -KK 3
Rocking Rodney Rat Posted December 2, 2022 Posted December 2, 2022 Nice work, that blower is sweet!! -RRR
Bullybeef Posted December 6, 2022 Posted December 6, 2022 What is the kit source of the crank mounted blower?
Kit Karson Posted December 7, 2022 Author Posted December 7, 2022 23 hours ago, Bullybeef said: What is the kit source of the crank mounted blower? Competition Resins 3
Kit Karson Posted December 17, 2022 Author Posted December 17, 2022 On 1/7/2022 at 3:38 PM, Kit Karson said: COMMON KIT CLASS: The Common Kit for GSL-XXVIII is the Revell 1929 Ford Model A Roadster (kit #RMX854463). The intent of this Class is for each entrant to start with the same kit, then display their widest array of individual creativity, craftsmanship, building skills, and technical innovations. The entrant may build the entry in any style or vintage. Regardless, all entered models must be based upon the parts from this kit. Entrants may also: i) swap parts from any other kit(s); ii) use any aftermarket parts (except for complete aftermarket resin bodies); and iii) use any building materials, techniques or technologies without restriction. Got to thinking about the Common Kit for GSL-XXVIII being the Revell 1929 Ford Model A Roadster... here's Jeff Allison's take on the subject:
Kit Karson Posted January 2, 2023 Author Posted January 2, 2023 On 1/7/2022 at 3:38 PM, Kit Karson said: COMMON KIT CLASS: The Common Kit for GSL-XXVIII is the Revell 1929 Ford Model A Roadster (kit #RMX854463). The intent of this Class is for each entrant to start with the same kit, then display their widest array of individual creativity, craftsmanship, building skills, and technical innovations. The entrant may build the entry in any style or vintage. Regardless, all entered models must be based upon the parts from this kit. Entrants may also: i) swap parts from any other kit(s); ii) use any aftermarket parts (except for complete aftermarket resin bodies); and iii) use any building materials, techniques or technologies without restriction. '29 Track Nose Roadster '41 Lincoln V-12 Flat Head Happy New Year! Universal email dated 1/1/2023 Revised: COMMON KIT The Common Kit for GSL-XXVIII is the Revell 1929 Ford Model A Roadster (kit #RMX854463). The intent of this Class is for each entrant to start with the same kit, then display their widest array of individual creativity, craftsmanship, building skills, and technical innovations. The entrant may build the entry in any style or vintage. Regardless, all entered models must be based upon the parts from this kit. Entrants may also: i) swap parts from any other kit(s); ii) use any aftermarket parts; iii) use any body from another 1929 Ford kit but may not use a complete aftermarket resin body; and iv) use any building materials, techniques or technologies without restriction. Doesn't really make a difference in the direction of the '29 TNR but will call for some changes on the tow vehicle! -KK 1 1
Bullybeef Posted February 20, 2023 Posted February 20, 2023 @Kit KarsonIt’s been a minute since we’ve seen an update here?
Kit Karson Posted February 22, 2023 Author Posted February 22, 2023 On 2/20/2023 at 1:07 PM, Bullybeef said: @Kit KarsonIt’s been a minute since we’ve seen an update here? Bil, been concentrating on the '29 XPU & Tag-Along the tow truck for the '29 TNR... -KK 2
bobthehobbyguy Posted March 5, 2023 Posted March 5, 2023 Waiting patiently to see more progress on this great project. The truck and trailer look great also.
Kit Karson Posted March 7, 2023 Author Posted March 7, 2023 On 3/5/2023 at 11:12 AM, bobthehobbyguy said: Waiting patiently to see more progress on this great project. The truck and trailer look great also. Brother, the last time the '29 TNR was seen in public was at an IPMS event... One of only two models that appeared in an unfinished state. -KK btw the other one was the '29 XPU! 1
Butter 1 Posted March 7, 2023 Posted March 7, 2023 Very impressive! Everything fits so well together. Hope you get these 2 29's done in time for GSL. Looking forward to seeing the finished project in person. 1
Kit Karson Posted March 8, 2023 Author Posted March 8, 2023 2 hours ago, Butter 1 said: Very impressive! Everything fits so well together. Hope you get these 2 29's done in time for GSL. Looking forward to seeing the finished project in person. Ron, they will be there finished or not... -KK
John B. Posted March 8, 2023 Posted March 8, 2023 The supercharger looks like a fine piece of jewelry - well done,sir! 1
absmiami Posted March 25, 2023 Posted March 25, 2023 Seats look really good - how do you apply the AK metal - is it brush painted or rubbed on ?
Kit Karson Posted March 25, 2023 Author Posted March 25, 2023 (edited) 12 hours ago, absmiami said: Seats look really good - how do you apply the AK metal - is it brush painted or rubbed on ? Brush & Rub Wax Edited March 25, 2023 by Kit Karson Text correction...
Kit Karson Posted April 1, 2023 Author Posted April 1, 2023 '29 TNR & '29 XPU in Primer for the 2nd time... 3
Kit Karson Posted April 3, 2023 Author Posted April 3, 2023 On 4/1/2023 at 6:01 PM, Pico said: Nice! Thanks, Brother! Sorry I had to pass on our club meeting, yesterday... -KK
Kit Karson Posted April 12, 2023 Author Posted April 12, 2023 V-12 Header Pipe #4 - 3rd out of 8 slashed exhaust pipes: V-12 Header Pipe #8 & #6 roughed in... Tools of the trade... Header pipe source AMT '25 T... V-12 Header Pipe #4 & #2 in the rough... Drill the guide/pilot hole for the exhaust exit... Drill the larger exit hole... Locate & mark the center of the mounting pin hole with the tip of a #11 blade... Drill the mounting pin pilot hole... Drill for the pin... CA the pin... Trim the pin... V-12 Header Pipe #4 about to be slashed... Mark the kut... Kut the pre-drilled exhaust exit hole... V-12 Header Pipes #8, #6, #4 & #2 - 3 down 5 to go,,, -KK
Kit Karson Posted April 15, 2023 Author Posted April 15, 2023 '29 Track Nose Roadster '41 Lincoln V-12 Flathead Mockup 3
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now