Wonderbread Kustomz Posted July 18, 2013 Posted July 18, 2013 There are many different ways of weathering and thanks to Dr. Cranky for his videos and pics on weathering... This is how I do mine... I've had quite a few people asking how I go about weathering my cars... This is by far the easiest way I do it... Supplies needed are Red oxide or ruddy brown primer Satin or flat color spray paint Table salt and/or sea salt Cheap bottle acrylic paint ( burnt umber, burnt sienna, marigold) Cosmetic sponge Old toothbrush As always clean the body before any paint with soap and water. I let it air dry and then I primer with the ruddy brown primer... Once that's dry, I mist the body with some water in a spray bottle and then sift my salt over it... A combo of sea salt and table salt.... Let this air dry and then I spray the satin paint for the body color over this... I do mist coats until I get complete coverage. I let this dry for a few hours since its a flat paint, and once its dry, I put the body under cold running water and using the toothbrush, lightly scrub the salt off and you will have something like this... Now once that air dries, I take some of my acrylic paint and a cosmetic spong and lightly dab the sponge on the acrylic paint and using a paper plate, I dab the sponge on the plate until the sponge is almost dry. Then I dab the sponge on the body ( think dry brushing)... Less is more ... I use the acrylic colors as described above... When done it should look like this.... Hope this helps a bit.... Ask any questions you have and I'll answer as best as I can for you...
Ace-Garageguy Posted July 19, 2013 Posted July 19, 2013 When do you use the Wonderbread ? Just kidding. Nice info, and thanks.
Wonderbread Kustomz Posted July 19, 2013 Author Posted July 19, 2013 Thanks... Lol... Bill, its a nickname that my good friend Mr 1/16th calls me lol...
clovis Posted July 19, 2013 Posted July 19, 2013 (edited) FWIW, this works with hardware store variety enamel rattle cans too. It might not be as good as airbrushed acrylics, but it does work with enamel rattle cans. We used Rustoleum. It is probably best to allow the paint to cure completely before removing the salt. I found that the enamel encapsulated the table salt we used, and was much harder to remove those tiny bits of salt, but I liked the rough and crusty look that it left on the model. The large sea salt easily crumbled right off the body once the body was dry. Sorry for the thread drift. I scoured the internet high and low, and couldn't find anyone using enamel rattle cans for this method of weathering. Seems that everyone in the Western Free World is using acrylics and airbrushes for this process. Am I the last hack on the planet still using rattle cans? Edited July 19, 2013 by clovis
Jantrix Posted July 19, 2013 Posted July 19, 2013 (edited) Am I the last hack on the planet still using rattle cans? Nope. Not even close. Enamels do pose certain issues, like the rough and crusty look after the salt is knocked off, as you mentioned. I have found the best way to fix the rough paint breaks is a good scrubbing with 70% isopropyl alcohol and somebody elses toothbrush. I'm not 100% happy with this, but it was my first time using the salt technique. I feel it doesn't really reflect how a real car would weather out. However, 99% happy is still pretty good. James, your Fleetline looks awesome. I'm looking forward to trying this again. I think I will try airbrushing some acrylics next time. Edited July 19, 2013 by Jantrix
slammedi'am Posted January 22, 2014 Posted January 22, 2014 I thought I had replied to this but will be trying it out soon hoefully
slammedi'am Posted January 22, 2014 Posted January 22, 2014 Do you use anything to sel it up afterwards?
Johnag4004 Posted February 6, 2014 Posted February 6, 2014 When do you use the Wonderbread ? I was thinking the same and looking for the bread, sorry James... Many thanks for sharing this with us though, I have still yet to break into the dark arts of weathering, so am still watching videos and reading as much as I can,... Thank you... Andy...
slammedi'am Posted February 6, 2014 Posted February 6, 2014 I was thinking the same and looking for the bread, sorry James... Many thanks for sharing this with us though, I have still yet to break into the dark arts of weathering, so am still watching videos and reading as much as I can,... Thank you... Andy... I just used this write up to do my first.....Must say its easy and fun! I have some pics in the truck section of the one Im doing....I was reading and debating and finally took a stab at it....Like I said pretty easy to do....practice on an old body or something before going full force
Wonderbread Kustomz Posted February 7, 2014 Author Posted February 7, 2014 Lol... Thanks fellas.... Shane, your build is looking killer!
Wonderbread Kustomz Posted February 9, 2014 Author Posted February 9, 2014 Just a couple more... Thanks for the great replies...
Baugher Garage Posted March 3, 2014 Posted March 3, 2014 James - these all look amazing! Love the MC chopper!
shucky Posted March 12, 2014 Posted March 12, 2014 Awesome stuff. Can we see the cheap acrylics your using for dabbing the body with the make up sponge? Thank you!
slammedi'am Posted March 12, 2014 Posted March 12, 2014 You can get em for a buck at hobby lobby or walmart
Wonderbread Kustomz Posted March 28, 2014 Author Posted March 28, 2014 Thanks guys... Shane is correct... The paint is the cheap-o stuff from hobby lobby or micheals
Wonderbread Kustomz Posted July 1, 2014 Author Posted July 1, 2014 Wanted to bump this since the pics are working again... And there have been several asking about how to do this...
Belugawrx Posted July 1, 2014 Posted July 1, 2014 Thnx James I have just the right 75678 Chev shortbox P/U to try this on!!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now