Russell C

Enlargeable 1992 Autoweek mag article about that one here.

Camaro Alfa/Datsun-ish quadlight 'Cuda widebody Since my mind is filled with car images, they tend to overlap. In this case, when I saw this guy's illustration version of Bob Owen's '69 Camaro, of course I recognized it for what it was, but overlaps of the fronts of the '67 Camaro, the Alfa Romeo 1750 GT and Datsun 510 made me think I could move the headlights and turnsignals out in such a way that the front would take on the character of those others. Then, since another corner of my mind is occupied by Corvairs and Bo Zolland's sorta 'more Corvair-ish than Corvette-ish' (in my opinion) rear treatment of the Camaro, I thought I'd try to place Corvair taillights on it. But they didn't look right, and if maybe the goal was to mimic the front's collection of circles, then a 'Cuda treatment with the upturned bumper would work better. Dunno, the jury might be out on that, still. So, here we go, with some back-dating to pre-'69 sides, ditch Owen's giant rear wing, and shorten the rear deck just a tad…. This one might just be a model I still could do, but somehow it isn't fitting into the build schedule too well right at the present time.

Dances with Wolves. Buffalo - tatonka - buffalo - buff? Meanwhile, one of my favorites because it was in such a weird sequence: "Pudge is a fish?"

Yes, indeed, spotted the other print version at your site's ebay store link, took me a moment to catch what it is.

Very good, I tend to favor material leaning toward slightly demented... (edit: found it, another guy's Photoshop alteration of a Caddy fastback, but I do believe I prefer yours better)

From the two inner pages of a '74 Ford "L-Series for Owner Operators" brochure:

Now, that's a glue bomb....

Nordberg Ford COE 50 year tribute, 2014 version This is more of a 'wondering what it would look like' illustration, with the idea that it could be done in model form using the Meng Ford F-350 Super Duty kit. To set this up, I must first explain via the photo composite below that Bob Nordberg was the senior co-champion in the 1964 Revell-Pactra 2nd-National Open contest for his partly scratchbuilt phantom Ford cabover. First, there's a cover of the December '64 Car Model magazine I gleaned from an ebay listing, a different photo scan of pg 28 in the Dec '64 Rod and Custom Models magazine courtesy of the Model Car Museum's Hot 150 clone list, my own photo of the Car Model magazine spread taken of a copy at the Model Car Museum, and finally the color photo at the lower right of an unknown modeler's copy of Nordberg's truck, an ebay sale item that Steve Gilmore posted in his "Weird Cabover" thread here. Basically, Nordberg moved the cab of an AMT '62 Ford up and forward and filled in the gaps. He went for a quad headlight appearance - possibly the custom option in the original kit - while the other modeler retained the Ford pickup grille. Nordberg's truck was inspiring to me in the early '70s when I first saw only the single tilted cab color photo, because I wanted to build some kind of big rig and it was the only 25th scale one I'd ever seen anywhere. So, 50 years after its first appearance, I've done basically the same thing, opting for a recognizable stock look. Slightly different illustration basis than the Meng model, but the basic idea comes across, and it helps a bit if you ignore my somewhat questionable transition from the sides to the front. Yep, it would be an odd looking thing once again.

Excellent, been meaning to place my T'error at the gallery (borrowed photo here). I'd run across the CoffinCorner forum before, but distractions must have prevented me from going through it more, thanks for reminding me of it, fabulous model & 1:1 material there. Lathe-knurled tires! That will probably help me identify some bits of my late father's machine tools, which were mysteries to me before now.

Now that's a great interpretation of that old model. Looks like you have enough photo views to meet the requirement for submitting it to Dave''s Show Rod Guest Gallery, assuming it is still a current web site.

One box art I wouldn't see a need for altering is the Peterbilt cabover. Another one I think is just fine is the Diamond Reo. When I spotted the Apollo 116 brochure years ago, I thought for certain that either it was an alteration of the AMT box art, or (more logically) the AMT art was an alteration of it. But now that I compare both side-by-side, what may have happened is that both were drawn by the same person using the same basic dimensions and perspective lines (which appear to be identical), or else the AMT artist was inspired by the brochure, but drew the artwork entirely on his own, since none of the minor elements in the artwork are actually straight across matches - as in the reflections in all of the chrome, the sidewall coloring on the front tire or its alignment within the wheel arch, etc.

Planes sans wings = at least two motorhomes, and likely more...

Here is the way I had the very first model truck I built, but with three items I wanted but didn't have: taller stacks, chrome sleeper vents, and the bigger bumper from the Peterbilt cabover. Original box art at this photo link.

Yep, I can visualize the original Autocar Dump having the orangy red/white of the California Hauler day cab box art scheme..... I might be able to bash that out later since it would use the graphic elements of the California Hauler sleeper box version which I could plop onto the Autocar without much difficulty. Since I already had the illustration, I gave it a shot to see what such a red pinstripe would look like........... and though it may be my subjective opinion, it just didn't work for me the same way the white stripe works on the Movin' On Kenworth or other such paint schemes where it is a dark main color with a white stripe.

Holy Photos! There's maybe 14 pages of 100 photos per page on old Bonneville stuff......

I'd missed the original post, glad to see the update today since I'd only managed to record 4 episodes last year from Retro TV. Link here for the first episode to save others from searchin': http://www.youtube.com/watch?v=vrtrfRDdn00&list=UUv1xRsmc1tS2j4imjYD36vA

Never forget Willy Koenig's widebody XJS. Addict to such an appearance, I like 'em.

Ditto x2. The knuckleheads at my apartment complex can't be bothered to water the trees during the height of the summer, and they were really looking thirsty. This ought to do it 'til the next big rain comes. Might soften up the caliche for a while, but it will turn back to concrete like it usually does.

How? Well, not quite as indelicately as this, but similar with a little more sawing action on a Countach and a 300, then glue and bondo. Sorta. Why? I see things that aren't there, and instead of doing something more productive or useful to society as a whole, I make models of the images in my mind, or lately, I stop short with just photo alterations.

I love graphic artist Gary Campesi's rod renderings. Probably more than one modeler besides Rob Mattis here has seen those drawings and has ideas on building models from them. My problem is that I sometimes see vehicles that aren't there. While rumaging through Gary's drawings, what I saw in the pickup box of his "32 in Blue" were Edsel fins. Thinking that I might undertake a model project of Edselizing Gary's idea, I did the mildly crude photo alteration below, while borrowing someone else's 1:1 rat rod truck......... but in looking at all my various other projects on the shelf, it looks like this one is yet another that I probably will never get to.

Wait...... wagon? Yet another blast from the past, finished in October 1992 just in time to take to the Dallas Southwest Challenge contest a month later. If I remember right, entrants to the contest the prior year received not one but two 1/32 scale Kyle Petty stock car kits, and since I was already working on my Porsche 911 woody wagon at the time, that wacko idea fell onto these kits as well. I just used a chunk of the roof out of one kit and added it to the other with some styrene scrap for the B and C pillars. A slave to temptation on messing with people's minds, I always have been. One of the handy simple tricks I did to achieve the red-striped Bassett wheel rims was to lathe-turn a groove into the rim and then heat-stretch some red plastic sprue into a long thin hair, gluing it in place with just a couple of capillary action Tenax glue drops. I never could have painted such a consistent line like that. Just cheap clear acetate material for the rear side windows and rear window (which have yellowed slightly with age). It's an entertaining silhouette, but I doubt if the rear spoiler would have anywhere near the same aerodynamic effect as on a coupe. I did well at the SWC that year, this wagon placed 3rd in the Miscellaneous category, while my Porsche 911 CRX Honda got 3rd in curbside and my Bonneville Checker cab got 2nd in 1/43 & smaller - Street. Plus, it was a hoot to get pictured in Scale Auto's April '93 magazine coverage of the contest.

Thanks, guys. Evil Andy taunts me with my running gag yellow three-wheelers for the GSL contest "Group" category. One of these days I'll have to do a thread on the whole line-up. Hollywood Jim got most of them in that 'photo essay' of his, but there were more.

One more in the lineup of my 2 decade-old models. If I remember right, this AMT kit was a door prize which I was wondering what to do with. Since I'd had the flame image of the 1:1 prototype for a Pacer pickup rattling around in my mind at the same time as a Ferrari with sidepipes, that's what brought this about. I worked occasionally on it from '92 to March '94. It was pictured in the GSL coverage of that other magazine's '94 contest annual, and also again in that same magazine on page 42 for the Springerville AZ contest. Where'd 20 years go? Whacked the roof, but not much else custom beyond the Fujimi wheels and Pirelli P-Zero tires. My dad lathe-turned the outer rims from aluminum. I was living in NM at the time, but I figured an Arizona plate would do good on this one - hot car for a hot place. The main color is some kind of nail polish medium tone yellow, and the flames are a really nice nail polish pearl orange, airbrushed light at the front and heavier/darker at the ends, where I masked off the yellow with Bare Metal foil to eliminate paint bleed under the masks. The inner curves and flame ends are hand-painted black lines. The trick to getting a decal-flat finish was via the clear coat. What I did was lay on a ton of PPG Deltron clear, which simply built up the stairstep effect of the flames on top the yellow, but when the clear cured, I had so much of it over the flames that I could chisel that excess down to the level where it met the built-up clear between the flames. Deltron is really carveable, actually, sorta like chiseling clear wax, and it polishes really nicely. But I no longer have auto body shop contacts who could supply me with small quantities of that stuff. To get the gauges to pop out of that otherwise dark hood, I put in model aircraft ones that looked like the Lambo's gauges, which were black reverse-printed on clear sheet (similar to these). With these, it makes you look like a super modeler when all you are doing is dropping a blob of yellow for the needles on the back and blobs of white for the numbers. What everyone sees are perfect needles and numbers through completely flat "glass". As Richard Petty would say, I'd rather be lucky than good, and it turned out that my gamble on making the flames look flat against the background worked out well, as did the fading on the orange. I'm not actually all that good at airbrushing, but I get a kick out of the way that turned out to this day.

Great work. I had missed your build page. Rapid prototyping is the direction I plan to go in once I get out from under my current non-model car work.

Thanks! I'll see about doing a few more reworks. The first kit I ever made was the California Hauler with the sleeper box, but I never cared much for the brown on the box art. My dad spray painted it a forest green and put on the kit graphics. I may try to replicate that as one rework on the list. Yep, on the Kenworth's rear suspension, I'd forgotten about that.