harti20

Thank you David Happily it can't be seen that well in the pictures. I had to repaint the engine hood and the yellow turned out much lighter than on the rest of the body. Also the look of the seats is something I'm not really happy with. And in general most of the leather work is way too thick. but this time I wasn't able to skim it even more without damaging the leather... ? Thank you too, Donald. But as I said, the seats are one of the points I'm not really happy with. Maybe I'll get used to it over time, but as I wasn't happy with them already two years ago, I doubt it ? Urs

Hi all Long time no progress on this build... To be honest, after my last posting I was just too frustrated by the results achieved so far that I put the box back on my stash and started new projects. There also was one problem I didn't really know how to solve, I only knew that I wouldn't use the black rubbery folding top provided in the kit. As I came to a halt with the build on my Ferrari Roma because I had to wait for an opportunity to clear coat the body, I decided to pull this box out of the stash and finally finish this car. But most of the time I forgot to take pictures of the current progress, so I can only show you how it looked like two years ago when I put it back to the stash Then it progressed to this state, about one week ago And yesterday it was finally the time to attach the last few parts and calling it done ? I'm not really happy with the final result, but I tried to at least bring it to an more or less satisfying end. More and better pics will follow as soon as I went to the studio for the next time ? Urs

Hi all Unfortunately I didn't have that much time to continue this build during the last two weeks, but nevertheless I reached a point where I can't continue without clear coating the body. I hope I'll be able to do so upcoming friday, if not then surley / hopefully / maybe one week later First of all the floor mats have been painted. For the "Roma" lettering there are two decals provided in the kit, but only in red, which I thought wouldn't really match with the rest of my interior. So I decided to use some Tamiya Panel Line Accent Color Brown instead, let that flow in the lettering's recesses and wipe it off the surrounding faces with a moist q-tip. I only saw on this macro that I didn't manage to wipe it off completely in some spots. Also the black parts look much worse in this pic than in reality, as it is the case so often... After that the steering wheel was completed, with a total of 5 decals, measuring only 1 x 1.5 mm partially. Usually I tend to do without such small decals as they almost aren't visible in the end and because they usually stick everywhere but in the spot where they should when I try to apply them. But somehow I must have had the luck of a good moon-/star-constellation as this time most of them went on without any bigger issue The dashboard was completed too. Unfortunately I didn't notice that the large instrument-cluster-decal went on quite lopsided until it was too late. But as hardly anybody will be able to see it in the final model, I can live with that, even though it annoys me... And finally the headlights have been completed and are now ready to be inserted in the clear coated and polished body, once I had the time to do so That's all for now. Maybe there will be a larger gap until my next update because it's now depending on when I'll have time to clear coat the body. Urs

Hi all Unfortunately I had to postpone clear coating as my son caught a flu just before his school holidays, so he was at home on my intended clear coating day. And as this 2K stuff is quite aggressive, I only use it when he's at school to be able to give the whole apartment a thorough vent before he comes home. Now I think I'll have to wait until mid march for my next attempt at clear coating. But first of all nobody is pushing me and second there is enough other work to do on the Roma (and the McLaren Senna and a figure I started some time ago and an additional build which runs alongside and... I think I just have too many concurrent projects going on at the moment...) First of all the painting of the rear seat has been corrected. After that the buckles for the rear seats and the first few PE parts have been installed. Additionaly the grommet (I hope it's called like that ) had to be removed because I noticed that i misinterpreted the instructions and these parts should have been attached to the inside of the body. The spot where I had installed it first won't even be visible once everything is put together... After this work on the dashboard continued And finally the door panels could be completed. Each panel consists of a total of 6 individual parts which makes painting much easier That's it for this week's update Urs

Hi all Thank you very much Unfortunately I didn't find that much time to continue this build this week as I would have liked, but there is some small progress I'd like to show you Let's start with the pic where I had a minor shock moment when editing the photographs for this W.I.P. As you can see, the brown areas are of different size... ? Luckily the reference pictures show that the driver's side is correct, so I'll only have to cover some brown with grey. The other way round would have been a little more laborious. Then the Ferrari badges have been applied to the body. Therefore the body is now ready to be clear coated. With a little luck I will be able to do so upcoming friday And finally the seats have been completed. As mentioned in my last update, the badges for the headrest are slightly too large, but in my opinion they're ok the way they are. And I think nobody will really notice it, unless he/she is a Ferrari Roma expert That's it for today's update. I hope I'll be able to show more next time Urs

Looks like a good start on this one. I bought this kit soon after getting back in the hobby almost 10 years ago, but didn't start it yet. Mainly because I wouldn't know where to free up some space to display it once it's finished I'll be following your build with great interest

Hi all Don't worry, I will continue to post pictures Thank you The last few days I applied the few carbon decals on the body. Also the PE parts for the Ferrari logos have been attached. Just in case the carbon is not that obvious in this picture: It's the splitter and the side skirt After that, the diffusor received its last pieces of carbon and the first few PE parts. There would have been a decal for the unpainted spot, but somehow I didn't find out how to apply it correctly. In the only way it made sense to me, the pattern didn't match at all with the surrounding decals. So I decided to do without it and paint this area in black one the clear coat has been applied. The rims have been painted with Alclad Magnesium first (rim at the left in the picture underneath), as I thought, Gunmetal would be too dark. But then I had the idea to apply some Hasegawa Mirror foil to the spokes, paint over it and remove the paint on the foil afterwards. But as you can see on the rim in the middle, there was almost no difference between the Magnesium and the mirror foil, so I decided to paint it in Alclad Gunmetal anyway. The (almost) final result can be seen on the right rim in the pic. It's only almost the final result because I had the idea to apply some nuts from a 1/12 MotoGP detail set. So far I didn't take a picture of the really final result ? Finally the seat has been completed. Whereat... it's only nearly completed too ? Just when I thought, I had it done, I saw that there is a Cavallino Rampante on the headrest. alpha model provides you with a red decal for that. But by looking at pictures of the 1:1 seat, the horse seems to be embroidered and therefore has a certain thickness. So I looked at my leftovers from previous builds and found two PE parts, which are a little too large, but still acceptable. As the embroidery on the original seat is a little darker than the rest of the seat, I'll use black primer before applying the same brown (Ferrari Cuoio) I used on the seat. That's it for today's update. With a little luck I'll be able to finish body work prior to the start of my son's school holidays, so I could clear coat it before Urs

Hi all Thank you very much As mentioned in my previous post, the body had some spots where I had to sand it to get rid of dust, so I repainted these spots afterwards and after that was done, the whole body got two more layers of paint. Soon I'll apply the few carbon decals and the Ferrari badges As the primer's grey was much darker than I had it in mind, I first sprayed the interior white, before applying Ferrari's Cuoio paint. I was so pleased by the color that I changed the color scheme of the interior to have more Cuoio and less black surfaces. One of the seats has alreday been masked and painted on the backside. Now I'll only have to paint a small area around the headrest in semi gloss black and add the additional parts, then this one will be finished and ready for final installation That's it for today's update. I think I'll be able to show more of the interior next week and maybe also a body that is ready for clear coating, with all the decals on Urs

Hi all After having finished the Lamborghini Aventador Roadster it's time for another italian sports car, but this time it will be a prancing horse from Maranello. I had three different models to choose from: the Ferrari SF90 Stradale, Ferrari Roma and the Ferrari Monza SP2. I would have loved to start all of them, but had to decide for one of them. For the Roma I already had a color scheme on my mind and had the paint needed at home (both points would have been true for the other two builds as well). But the decisive factor was that the paint had already been opened for another build I finished some time ago and I had the impression that I had to use this paint quite soon. So of course I picked the SF90 Roma from the shelf... ? Up to know not much happened. All the resin parts have been cleaned (although I have to admit that there was very little cleaning needed) and the one piece that arrived already damaged has been fixed. After that all the parts have been primered so that I'll be able to handle them without the need of wearing gloves The damaged part as it was inside the box and after fixing and putting on some primer. I think the repair turned out quite ok Finally I also put some coats of primer, followed by some thin layers of paint on the body. On the front hood I had to sand some dust, so I'll go over these spots again with paint and maybe I'll give the whole body some more layers before adding the decals and clear coat. This time the carbon work will be on an absolute minimum, so that motivation should stay on a high level, not like on my McLaren Senna (yes, it does still exist) ? Wednesday I should receive the interior paint ordered, so I should be able to start with the interior next weekend Urs

Hi all Thank you for all your comments. Glad that my description was of some use to some of you I'm only an amateur photographer who is in the lucky situation that I can use the studio and some of the equipment of a professional photographer ? Sorry I didn't reply sooner, but I think the most important points have been mentioned already by @peteski, @Straightliner59 and @Bainford. Thank you guys for sharing your knowledge ? Regarding your question about a lens recommendation I'm afraid I can't really help you as I don't know the Canon system at all. I used to use Minolta cameras back in the film days, started my digital experience with KonicaMinolta and stayed in the system when Sony took over

Thank you all for your kind comments ?

Hi all Yesterday I took my finished Lamborghini Aventador Roadster with me, when I went to the studio with my son, so he could take some pics of his treasures I know, the paint on the doors is not perfect and the break caliper on the left front wheel must be out of order somehow, but I'll leave it as it is as in the end I was only happy to have it finished. I don't know if it was the kit or me, but somehow it was a struggle from step 1... I hope, you like the pictures Urs

Hi all In my Under Glass thread to my Benz Patent Motorwagen @peteski asked me if I could make a thread in this forum to show how I take my gallery pics. As I was at the studio today with my latest build, I could take some pics to show my setup. As I already wrote in my before mentioned thread, I use a large piece of black glass which used to be part of a coffee table and put the model on top of this glass. The white backdrop gets lit by two flashlights, placed on the left and on the right to get an even illumination. The model itself gets lit by one large flash from the right, slightly tilted downwards and indirect by a second flash that aims to two large pieces of styrofoam placed at an angle, to reflect the light to the model. Here I tried to make a drawing where you can see the setup from top The two large black pieces of styrofoam are to prevent light spilling from the flashes which illuminate the background, but I don't always use them. Here you can see how it looks in reality, looking from the two background flashes to the table The camera is mounted to a very sturdy column tripod to minimize any movement between the single frames taken. Every picture that has a certain depth is made using focus stacking. Therefore I take one picture by focusing on the very nearest point of the car. Once this picture is taken I move the focus point very slightly to the back and take the next picture and so on until the focus point reaches the point of the car that is the furthest away. So I end up having between 15 to 20 pictures of the same subject (that's the moment where a sturdy tripod comes in very handy ? ). Back home, I make adjustments to colors and lighting of the pictures (the same corrections for all the pictures, otherwise the following steps would become more complicated). Then I select all pictures of the same subject (e.g. driverside in a certain angle from the front) and load them as seperate layers in photoshop. When photoshop did load every single picture as a seperate layer I end up with something like this: After that I let photoshop adjust the single layers by selecting all layers and using Edit -> Align layers automatically (or similar, my photoshop is german, so the commands may differ to the english version ? ). After some heavy work done by photoshop I immediately use Edit -> Blend layers automatically and let photoshop do its work. When it's finished it looks something like this Now I reduce everything to one single layer to save some memory and disk storage. Then I use the selection tool and let photoshop select the subject. With this car it did an outstanding job, I didn't have to do one single correction to the selection. As I want to edit the background in the next step, I have to invert the selection made by photohop and then add a levels layer. There I only have to drag the marked slider to the left until the edge disappears (or enter the value in the edit box, if I already made the correction for another picture of the same series). That's it, after that step I only have to save the picture and upload it ? I hope this little how to is interesting for some of you, although I know that hardly any of you will have the possibilities to do the same, but maybe it may be some kind of inspiration Urs

Hi all During the holidays I took some time to wet sand the body. First I started with 2000 grit to get an even surface. After 3.5 hours of sanding the body looked nice and even After that I continued wet sanding with 3000 / 4000 / 6000 / 8000 und 10000 grit to bring back the shine (best visible in the large horizontal area in the front of the car) Once that was done, I polished it with Zero Paints' polish compounds and finished it all with applying Tamiya Model Wax all over it. Then I only had to bring together the prebuilt subassemblies. So it was time today for the marriage And right after the wedding ceremony it was time for some pictures in the fotobox. Here you can see that I struggled applying the green paint. Even if the body and the doors had been painted at the same time with the same amount of layers, the green on the doors has another, yellowish tint... ? That's it from this build. I thank you all for your kind comments during the build and would be happy if you joined my next build as well Urs

Hi all Thank you so much. The point where I enjoyed this build is already behind me ? I started it more than a year ago already and stashed it soon after the start for a few months because I got the impression that it was a quite bad quality kit. Somewhen I took it off the stash to continue because I couldn't remember what made me pausing it. I never really found it out afterwards, but it was never real fun building it. And I already decided for my next project and can't wait to start that one. But I'll try to don't rush this build and finish it in a way I can be happy with in the end Not much really visible done this week, as it was more or less only sanding / polishing the clear I applied a few weeks ago and apply clear to parts I always forgot to clear coat in the first two occasions... ? First of all the wheels could be completed. I had to wait, because the calipers were amongst the parts I always forgot to clear coat. I think It would have been better I had done something different than modelling yesterday, as it just wasn't my day.... So I was not too surprised when I looked at the picture today and saw that the front calipers are installed quite skew... The part covering the engine bay has been clear coated matte. Now I only have to paint some gloss black (and maybe some metallic) accents to finish this one. And finally I sanded, polished and assembled the engine hood. While sanding with 6000 grit I suddenly noticed some kind of bulge (you can see it in the lower right part in the picture). As I usually see the paint getting thinner and disappear eventually when sanding, I was kind of puzzled, what this was and sanded very careful over this spot with the finer grades. While polishing, the part suddenly started to feel soggy. That's when I realized that it wasn't only the paint, but the whole part had broken... Somehow this particular part made problems from start to end. Fortunately I could stabilize it by attaching it to the lower (black) part. This also made it less obvious, so I'll leave it that way. If it will disturb me too much once finished, I'll think of something I could lay over it (like for example a baseball cap somebody put there). That's it for this week. I hope that I'll find some time over Christmas to sand and polish the body (and hopefully without breaking anything...). As soon as the sanding and polishing will be finished, there is more or less only assembly work to do, as all the subassemblies are finished or almost finished. Urs

Hi all Thank you for your kind comment. I really appreciate it, especially as I am getting impatient to have this build off the bench. Although I have the impression that not much happened on this build, there is some progress anyway to show you. First of all the diffusor was carbonized Then I tried something new. Instead of making myriad of templates and decals I tried to cover a whole piece with one single carbon decal. In some spots the decal tore apart, but nothing that couldn't be fixed with small patches. I just noticed on the picture, that I still missed two spots which need some fixing. On the front part (upper part in the picture) I had some wrinkling I didn't get rid of, but as this part won't be seen that well in the final build, I can live with that. This part sits right underneath the bonnet and as the bonnets remain closed on my models anyway, I don't care that much about the imperfections. If it would be more visible, I would have some spots more to repair. The parts without carbon decals will be brush painted black after the clear went on. In order to have something that can be hidden underneath the part mentioned above, I also finished the engine compartment. After that the dashboard was painted and the parts from the PE set have been attached. And finally I wet sanded and polished the doors in between the other work, so they are now finished and waiting for final assembly. That's it for this update. At the end of the week should be another clear coat day and after that I'll only have to finish sanding and polishing of the remaining body parts before I can start final assembly of this build Urs

Interested in seeing this build progress. When the kit was announced I immediately thought that I needed to get one of these.... until I saw the back of the car, that made me lose any interest ? Regarding CF decals: I learned a lot by watching AEREV's channel on youtube. Usually he doesn't explain very much, but if you take a close look at how he does it you can learn quite a lot.

Hi all Thank you for your kind comments :) After almost two months there is a little progress on this build. Last thursday was clear coat day. Unfortunately this time I got some really nasty blobs of clear spit on the body. Meanwhile I've found three possible reasons: some contaminants within the clear blobs of clear on the tip of the nozzle which flew off simply an error in handling the airbrush "Unfortunately" I became a little overcautios after the first few spits and 1. did filter the clear when pouring it into the airbrush, 2. wiped off the nozzle from time to time with a brush soaked in cleaner and 3. took more care about the operation of the trigger to not cut off air supply too early. Anyhow I could continue without any more spitting. As I already applied three coats of clear about three weeks ago, I have now six to seven layers of clear on the body, so I can start to wet sand and polish quite relaxed But now, on to the pictures And as the rims got their clear coat as well, I could finally finish the wheels That's it for today. From now on the updates should be on a more regular basis again Urs

Hi all Thank you very much for your kind comments As I am quite busy in my new job and was knocked out by a flu last week there's not too much I could show you, but some small progress can be presented anyway In one of my first posts in this topic I showed how I folded these fiddly little thingies for the brake discs and promised to show pics of the final product. I didn't finish with all four brake discs yet, but at least one can be shown, so here's how it looks like Additionally work on the carbon decals continued (at least on the outside). But if I look at my progress so far and how many decals are still left on the decal sheet, I think they'll keep me busy for the next few months (or even years??). Not to mention all the carbon decals needed for the interior... ? That's it already for today's update. Urs

Hi all When I went to the studio about one month ago I also had the Audi with me to take some gallery pics. For those interested in the WIP-thread, it can be found here: But now let's move on the the gallery pics Urs

Thank you all for your kind comments

Thank you all for your kind comments The model sits on a large piece of black glass (used to be a table board) and is lit by two studio flash lights, while another two flashlights illuminate the background. The only thing I have to do in Photoshop is to brighten up the background to remove the visible edge where the glass ends, as can be seen here: When I'm at the studio the next time I'll take some better pics of my setup and create a thread in the Tips and Techniques section

Hi all Finally I took the time to take some decent gallery pics. The Under Glass thread can be found here:

Hi all As I took some gallery pictures last week, I also had the Benz Patent Motorwagen with me, so I can finally present you the final images of this beautiful kit. The WIP can be found here: I hope you like the pictures even though they might be a little to temporary for this kind of car ? Urs

Hi all Yesterday I took a few of my built models to the studio to take some decent gallery pics. One of the models was alpha model's McLaren P1. The WIP-Thread can be found here: I hope you like the pics Urs