gatorincebu

Dennis, You are moving right along on this build. I like that suspension set up. Your bow with the steps looks great. And you paint job looks real good as well ! Be Well Gator

Darren, An idea for your trike trailer. When I had my trike. The trailer was a t configuration with a expanded mesh deck over the rear axle ( actually there was no axle per se. just VW axles welded to the angle iron box frame.) And the tongue was a 4 wide channel ( this is where the front wheel rode ) A boat crank on a upright post . And of course the ball hitch and chains. AT the rear of the platform was a full with drop down ramp That when raise was supported by two bar ( one on each side ) The fenders where a couple of motorcycle front fenders . Yes the trailer was basic and not fancy. there were no springs or shocks. In Florida a three wheel vehicle under 1,500 lbs is considered a motor cycle ( trike ) I hope that description makes sense. I do not have any pictures of the trailer. I do have some of the trike. but I need to find them lol Looking forward to this addition to the Tiki project Be Well Gator

Thank you Dennis. I will b e looking onto their products. Be Well Gator

X's 2 , Excellent job on this project.It looks great! Be Well Gator

Joe, I normally don't come up here to the four wheeler section. But I saw your Sedan delivery and had to take a look. You have an awesome project going on here ! Secondly Sending you and your family some good wishes and lots of good karma ! Be Well Gator

Darren, Looking forward to seeing what you come up with for the Trike and trailer . QQ Be Well Gator

X's 2 I also like your two tone paint job. And you did a good job on the body work ( hood ) And the scallops look great ! Be Well Gator

Bill, Glad to see you back at the hobby bench. I like what you've done thus far. Its looking pretty good. Be Well Gator

Jordan, You did a pretty good job building that up into a decent looking working truck. I have a couple of those and have not been able to get rid of them. So they will end up as construction trucks. Be Well Gator

That looks real good ! You did a super job on it. Nice sharp paint lines. Be Well Gator

Mark, That looks good. Being a machinist can be a big advantage for you. Be Well Gator

I agree with all of these comments ! Be Well Gator

Nice work on this project thus far! Be Well Gator

Mark, Judging by the photos of what you've done so far. I doubt you will have any problems here . Besides like Jonathon said. "This side of the Forum is the Gentle Giant !" I will be looking forward to seeing your boom cylinders ! Be Well Gator

Hmmmm ! I am liking what I see here . There is nothing wrong with your modeling skills ,that is for sure. That paint looked great. Too bad it didn't work out for you. As for the crazing paint .I would strip it all the way down, Then scrub it with a toothbrush with some scouring powder. Then wash well in warm soapy water and rinse well. That should do the trick, I like what you did to the bed of the truck. Good luck with the fender repainting. Be Well Gator

Darren , Glad you like the Trike kit and decals! ;-)) Oh I think the ghosting will work well on this project ! Be Well Gator

Jan, You did a real nice job on that Honcho ! I have two of them I want to finish up as company work trucks but can't find the windshields. :-( Be Well Gator

Dan, The Dodge emblems looks good. Where did you get the chrome powder? Do they have other powders for like steel or stainless steel? Be Well Gator

Pat, I think the wire hinge is the better choice ! And the interior is also looking real good. great look work here. Be Well Gator

Rob, The work you've done so far looks real good. keep at, and remember keep on having fun! Be Well Gator

Kurt, Glad to see that you put this one back on the bench ! I will be looking for further updates. Be Well Gator

I like both of your projects. I like the idea of the 4X4 Elkie , that is just cool. And the panel truck, well I am partial to them , and the 4X4 conversion . Be Well Gator

Michael, That is one really fine looking example of the Alaska hauler. And I whole heartedly agree with everyone elses comments on the satin paint job, your wheel and tires choice is spot on. Be Well Gator

Jan, You did a excellent job on this one. And I agree about not using those decals that come with the kit. I think this truck looks pretty good in the plain Jane wrapper . Be Well Gator

Juergen, That is one really fine looking custom truck and trailer. You did a fantastic job on this one ! Be Well Gator