Jump to content
Model Cars Magazine Forum

absmiami

Members
 View Profile  See their activity

  • Posts

    4,782

  • Joined

  • Last visited

 Content Type 

Everything posted by absmiami

  1. absmiami
    These lines carry the headlight and fog light wiring - pretty sure
  2. absmiami
    Rattlecan : humbled back to eng bay - the shielded lines that run from the bulkhead left and right forward are painted metal wires that are model railroad accesories - they are tied to the panels with wire on the right side - leaving room for the bonnett brace - the left side wire runs thru metal clips made from pins and soldered nickel silver …
  3. absmiami
    Well done - lookling forward to the English wheel ….
  4. absmiami
    Shielded oil lines in the eng bay - running in and out of the oil radiator - the line is aluminum .050 wire - shielding is wound with .0075 steel wire - w RB Motion fittings …. Nice and flexible …
  5. absmiami
    Working this week on some shielded lines …. The trunk has one for the light wires- these run to the tail lights and the trunk supplemental lights - squeezed 5 .0075 wires through the shielding - wanted 6 - # 6 wouldn’t fit - the shielding is .0085 steel wire wrapped around and around and around a length of .022 brass tube … scalemaster showed us all how to do this on his L O L A Lola ….
  6. absmiami
    Well done
  7. absmiami
    Nice !
  8. absmiami
    Build it / post it anyway - we’ll call it a protest build …
  9. absmiami
    If you check the link on page one - i think there were 3 GSs in the 64 race - and i think the third is unclaimed - just sayin -
  10. absmiami
    Oops …. Im in too good a mood a mood to commence a rules review …. pre-fit / check EVERYTHING …
  11. absmiami
  12. absmiami
    The screen will be a stamping - using this stamp / die thingy that was turned on the Sherline …
  13. absmiami
    Here’s the screen i’ve chosen - Acu-stion made some nice accesories - but they haven’t been active in years - this screen was used because it’s relief etched on one side - with a weave effect -
  14. absmiami
    Yup
  15. absmiami
    Smokin’ !!
  16. absmiami
    Found some photo-etched screen that is fine - so the headlights will still be visible - put i got to make a part to stamp/shape the screen
  17. absmiami
    Like this …
  18. absmiami
    Found a length of brass tube that is the correct diameter - the bezel that seats the screen has to fit tightly around the headlight shell - cut 2 rings and soldered them to .010 brass sheet to make the parts …
  19. absmiami
    Gracias .0010 was restored w headlight screens - were probably used in the Spa race …
  20. absmiami
    The kit had a white metal racing mirror - but it was a little small - so i made this one with a pin squeezed into a short length of alu tube - glued into the plastic mirror back plate - ill use a polished peice of nickel silver for the mirror …
  21. absmiami
    .010 cl plastic slips into the frames …. Make the frame post handles and they’re done …
  22. absmiami
  23. absmiami
  24. absmiami
    Betting you’ve heard of the Don Lee Special …
  25. absmiami
    Correct
×
×
  • Create New...