Dennis Lacy

I’ve seen pictures of the 1:1 Tudor and this is a great tribute to it. I especially like and appreciate the rework on the seats and side panels. Nice job!

Thanks! Although, with the heavily chopped top it might be all for nothing! ?

More work on my Tudor. The interior in this kit is pretty plain. Added window crank and door handles from a Revell ‘37 Pickup and armrests sliced off of a pair of Revell ‘40 Ford door panels. Detailed the gauge panel with the kit gauge decals and flowed black paint into the insert background. Added a shifter from Revell’s 29/30 hot rod kits, ebrake handle from a Revell 27 Touring and some AMT seatbelts. With that the interior is ready to paint and I’ll be chipping away during the week. ?

Did a bunch of the fiddly detail painting today of the chassis parts, engine parts and some black washing. After assembling the intake, supercharger, carbs and filters I couldn’t resist a quick engine mock up. Now that the trans is painted aluminum the engine needs a clear coat. Trying to decide if I want to use a distributor or a mag. ?

My shop is a 1/2 hour from Disneyland. You’re welcome to come by for a visit. ?

Getting more paintwork done. The frame and some other parts have been clear coated which darkened up the Titanium Silver nicely. Can’t wait to see the color polished and waxed! Gonna try on Friday to get the frame masked and the floor sprayed flat black.

Moving forward. Sprayed the frame and chassis components today. Went with Tamiya TS88 Titanium Silver for the main color. Chosen largely because I had the brand new can on-hand and also because it’s a nice color that should look really nice on a street rod sedan. For the engine I had a partial can leftover of Tamiya TS92 Metallic Orange. I will also use this color to sparingly accent a few other small parts. These are just base coats. Everything will get a healthy coating of gloss clear. ?

The AMT Double Dragster was never on my radar until all of the hype ensued around its retro reissue back in 2009/2010. Another forum had a build-off to celebrate the Double Dragsters long-awaited return, which I participated in building the twin engine rail. Whereas most folks building the dragster opted for flashy paint, lots of chrome and the visually impactful dual supercharger setup I went low budget with no chrome and the basic looking Hilborn injection. The rail turned out nice but it was plain. About 5 years ago it suffered some glue failures and fell half apart. It was put in a box to be “fixed some day” and forgotten. Two weeks ago I was going through boxes under my bench, rediscovered the model and decided to fix it up with a host of upgrades. These included: Replacing the entire front axle and suspension with a full chrome assembly. Replacing the painted headers, valve covers, magnetos and fuel tank with chrome pieces. Replacing the basic injection with the dual supercharger setup. Fixing up the interior with chrome hand brake, tachometer with gauge decal, chrome axle shield and detail painting the molded seatbelt detail. American 12-spoke and 5-spoke wheels from AMT’s 32 Vicky. AMT “Gasser” parts pack Pirelli front tires and printed M&H piecrust slicks. The 14 year old Tamiya Chrome Yellow and Black were polished and waxed to restore their shine. After finishing up the dragster rebuild yesterday and having so much fun I decided to give my Fiat a quick facelift today! I had built this one about 13 years ago and deviated from the Chrysler engine to one of the Chevy’s from the dragster with the Hilborn injection detailed with fuel plumbing and Venturi tubes. The engine also got the chrome front cover, chrome oil pan and valve covers from AMT’s parts pack Chevy engine. Todays upgrades include: Chrome front radius rods, tie rod and drag link. The same wheel and tire setup as the dragster except different print on the slicks. Chrome headers. A fresh polish and wax of the 13 year old Tamiya Mica Silver paint. To say I’m happy with the updates of both cars would a huge understatement. It’s amazing what a fresh set of wheels and tires and some shine will do! I also love how the new front wheels and small tires very closely match the box and instruction artwork compared to the thicker spoked wheels and giant tires given in the kit. Not only do they look far better proportionately, the smaller tires vastly improve the stances, especially the dragster. ?

Yup. Using one of Drag City’s bodies that I mastered. If you go back a page, or two, or three, you can see a full mock up.

The nasty weather has gone away and today was a beautiful 84 degrees. Brought a box full of parts with me to work and got everything for the engine and chassis primed with Tamiya Fine Gray. Tomorrow I’m gonna wet sand the frame with 600 and prime again. Have a restock of Tamiya masking tape coming sometime tomorrow as well. Colors going on next week. For now here’s a redundant set of pictures incase people don’t know what gray primer looks like. ?

Back in 2010 (?) when AMT reissued their Double Dragster kit both in regular box and deluxe tin box I built the twin engine rail as part of a build off on another forum. Everyone was going for the dual Supercharger setup so to be different I chose the basic Hilborn fuel injections. I also stripped all of the kit chrome and painted everything for a lower budget look. The model turned out nice but was pretty plain. Some years back glue joints let go (because I glued directly on paint) causing the front axle/suspension and engines to become disconnected. It was put in a box to be fixed “later” and was forgotten until the other day when I opened the box it was in under my workbench. The paint is still nice enough that I thought it should be given a second chance at life. Luckily, the rest of it snapped apart effortlessly. Being that the first version was so plain I decided to dress it up substantially this time around as if the team had a successful 1st racing season and wanted to improve the car with lots of show and a lot more GO for season 2. I cracked open another Double Dragster kit and started pillaging chrome and dual Supercharger parts! So far the twin Chevy’s have been reconfigured with chrome valve covers, magnetos, headers and the dual Supercharger setup. The injector bridge still needs to be painted as do the couplers on the charge pipes as these items are currently set in place. The blowers, headers and valve covers received basic black detail painting. The fuel tank was also replaced with a chrome one. Inside the cockpit the hand brake was changed out for a chrome unit and the previously omitted chrome axle shield and chrome tach were installed along with a gauge face decal. The seat is still out being reupholstered. New wheels, the American 12 spoke fronts and American 5-spoke rears from AMT’s 1932 Ford Vicky retro reissue will be used along with a pair of AMT small Pirelli front runners and AMT Parts Pack slicks. A quick note about the front wheels and tires. In all of the box art and instructions illustrations small (and proportionately better looking) front tires are shown compared to the way-too-big front tires that actually come in the kit. The Pirelli’s found in several AMT drag kits and one of the competition wheel & tire Parts Packs are spot-on size-wise. The 12-spokes from the 32 Vicky also much more closely match the thin, spindly spokes shown in the art and illustrations as seen in the example below. I also pulled all of the chrome front axle parts to be installed next along with the spindles stolen from the original painted front end. This is as far as I got last Saturday morning before the weather got gross and I couldn’t stand to be in the garage anymore. Hoping to wrap it up this coming weekend. ?

I’ll take it! We are having our usual September heatwave for a week’s worth of days. Only 104 today but Thursday/Friday was 109. Supposed to be down to 80 by this Wednesday. Perfect painting weather.

Update: I have everything figured out and paint prepped for my Sedan. Supposed to be getting a serious reduction in temperature by mid upcoming week and plan to lay primer. ?? Checking in everyday to see what everyone else is up to. Great work by all!

This has to be one of the best takes on AMT’s 34 5WC that I’ve ever seen AND one of the best uses of one of Ed’s chopped 34 bodies. Looks awesome from every angle. Great color choice and beautiful finish. ?

Looking good!!! @Rocking Rodney Rat Love all the detail painting.

There’s a ton of killer work going on in here. Awesome job, everyone! My Tudor is impatiently waiting for tolerable garage temperatures. ?

@stavanzer I have been jumping around to multiple projects trying to edge them all closer to paint ready. This one is basically there except for needing to rework the front half of the exhaust to match up to the Caddy engine.

Unfortunately it was TFH to be out in the garage this weekend. Felt like an oven! So no progress for me. ? @Rocking Rodney Rat Nice custom color! @Bullybeef Nice patina finish!

So rad to see one of these get built. Looks awesome!

Spent this afternoon getting the details sorted on my Tudor. Basically ready to start the paint process! Just need to decide on color. Hightlights: Complete chassis, engine firewall, grill shell and radiator from current Revell 32 Roadster. Rear lowered 3” in scale. Wheels and rear large radial tires from Revell 32 Hi Boy Roadster (which are in the new Sedan reissue) with front tires with matching tread from Revell 40 Fords . Drag City Casting 3.5” scale chop top body (master by me). 32 Sedan complete interior. 32 Sedan stock taillights tucked back instead of out at the tips of the frame. Super easy kit bashing on this one in hopes of finishing it by the deadline.

What a seriously impressive display! Goes to show how prolific you are in this hobby.

I’ve always loved Pro Street and you pulled this one off quite nicely. Those rear views with the fenders widened inward to cover the huge tires and quick change poking out between is where it’s at! The injected Boss 429 was a great choice backing up the aggressive look of the car.

Very nice, Phil. Excellent take on the modern style you mention. Not sure what to call it exactly. Kind of a “retro-understated”. I especially like the slammed stance and 5 liter engine with the Webers and use of those air filters that tie in with the valve covers. Not sure if you’ve seen it but a great example of this style is Kugels roadster “32 My Way”

Ya’ll are a bad influence! Drag City Casting chopped body (which I mastered so technically I did chop it myself), new issue 32 Roadster chassis and blown small block, front wheels and tires from Moebius 65 Chevy II Gasser, Revell M&H slicks with the old 32 HiBoy Halibrand wheels (which are now in the Sedan reissue) and Louver Works louvered hood. Just dumped a bunch of chrome parts in the stripper. More to come…

@tim boyd I started pinning my parts from early into my return to adult modeling back in ‘08. Pretty sure I got the idea from someone on here. To be able to constantly mock up and do final assembly and always have the parts fit the same every time sure is nice. Not to mention the substantial additional rigidity they add to the finished model. Especially these old hot rods with spindly suspensions. ? @mrm I feel you. It’s tough having all these ideas in your head and wanting to flesh them all out. But, any serious model builder should have a minimum of 20 started projects at any given time. Especially guys like us that are heavy on the kit-bashing and fabrication. I have yet to build a woody model but I’ve got quite a few. I’ve forever been intimidated by painting the wood. Some people just go with some shade of tan and call it done but that’s not good enough for me. My Aussie friend, Bryce Michelmore, clued me in on the technique he used and I like his result so I’m gonna give it a whirl. More on that later…