Mike 1017

My point is that there is not enough surface on a spoon to get an accurate feed back We've developed this massive, high impact Polystyrene Speed Shape to give you the best possible surface for testing and display. The larger surface area and curves, over our original Speed Shapes, will help bring out some of the colors and finish details that could be too subtle to notice on the smaller shapes. Mike

Yes, I will check it out. The south is infamous for rebuilding flood damaged cars, total wrecks, and odometer fraud. I went with a friend to check out a used 1989 Mustang. I insisted that the car be put up on a rack so we could look at. It had rusted drivers' floor pan and had plywood placed under the carpet to hide the holes in the floor pan. The right wheel well was rusted through, and it looked like some sort of steel wool was shoved into holes. Last but not least the oil pan drain plug was stripped. The car looked great detailed out to the max. Buyer beware!!!

As always, a beautiful build Mike

I think that Kandy Brandywine and Kandy Apple Red are iconic colors that will never go away. Pastels {Miami Vice} and gray tweed interiors. And these wheels. Are fads that went away.

I am a little late for comments. A 440 Super Bee for $34,900? There has gotta be some major issues with that car. All of his cars seem to be under valued

Electric compressor for an air horn?

I always hope for Bikini eye candy Mike

I use Speed Shapes when I am experimenting with any sort of paint and primer combo. IMO plastic spoons are too small and not enough surface area. Example the spoon does not craze. Then you paint the car. Parts of the hood crazes and nothing else. The Speed Shapes are only a couple of dollars. They are as a big as a 1:24 body or a little more. Mike

Fat Brian is right. Use an automotive primer and see what happens. If the primer does craze Splash Paint has 1k and 2k primer Mike

Using The swimming pool is the best PT for me. I used it after rotator surgery. Later today I may go to the pool. It's kinda hard to explain. When I am in the pool my whole body feels great. For me this is a lot better than PT exercises and weightlifting. Try the pool!!! Mike

My heart goes out to you guys with all of your pain and suffering. I feel kinda ashamed complaining about my problem compared to what others are going through. Tuesday, I have an appointment with a neurologist. My doctor wants to make sure that this sciatica is not a symptom of spine problems. Good luck to all of you. Old geezer Mike

On June 21st I went to the emergency room because I had such pain from my Butt Cheek down to my knee. I was diagnosed with Sciatica. I have heard of it but never experienced it. My doctor prescribed a steroid pack, muscle relaxer, pain medicine, and physical therapy. Today 7/15 is the first day with no pain and I can walk as normal. I had to put up with this pain for almost 25 days. Anyone else have had the pleasure of dealing with this and how long did it take to get back to normal activities? Mike P.S. I WOULD wish this on my worst enemy!!!

My brother-in-law is 61 and was diagnosed with dementia 5 years ago. The medical care that he is getting has slowed the progression of the disease, but he will never be cured. A big problem for my sister-in-law is that Ron is still active. He emptied every draw in the kitchen looking for his shoes, he went out and mowed the neighbor's lawn. Wandered away from the house for 2 hours. When the police found him, he was so de-hydrated, and sun burned they took him to the hospital. He has had a lot of mishaps at home. There are a lot of ponds, small rivers, and swamp land in Florida where they live. If he wanders off, he could be attacked by an alligator, bitten by a rattlesnake or drown. Now the all the doors have electronic locks and Ron wears a GPS bracelet. As Ron says "This is one evil disease" Mike

Very nice build. Great paint job. I have used transparent paints on some of my cars.

Hey Guys Thanks for all of your comments. It does mean a lot to me. Mike

I did some more digging. the cartoonist Russ Meyers bought the car new. Here is the story on Hemmings . https://www.hemmings.com/stories/2014/06/02/numbers-matching-1971-plymouth-hemi-cuda-heads-to-auction

This is a replica of the $3.5m Cuda sold at Mecum Seatle 2014. The most expensive Cuda in the lineup but no options! No sport mirrors, no console, no spoiler, no pb or ps. Not 1. Drag Race a convertible? I can't find anything about the original owner. Plymouth did beef up the frame on Hemi convertibles. Drive the PCH top down. Oops too fast for that curve. This is box stock, painted with Scale Finishes Bright Blue, tires, wheels, hub caps and tire decals all from Fireball. Looks like I did not chrome the sill.

I saw these 2 on the North Shore of Hawaii

Steve, I agree. Mike

Right from the horse's mouth All LIQUID CHROME™ markers are filled with the unique LIQUID CHROME™ ink. The highly pigmented special ink has an unreached mirror effect on the marker market and is limited scratch- and abrasion-proof.

I have been looking at E cars. The range depends on how many options you are using. My main concern is road trips and the availability of charging stations. There are plenty of horror stories about 2-3 hour charging times. Missed reservations, parties, airline flights and so on and so on. Tesla has the most stations and is building more. Thier pick up is one I would consider buying. Mike

Does any company make a Chrome Acrylic Paint? Mike

Anyone watching The Offer on Paramount +? Any The Godfather fan should take a look at it. It is about the making of the movie. Some of it is over the top with especially Robert Evans {Paramount} and Charlie Bluhdorn. {Gulf and Western}. The last time I saw a person barking as a dog at another person was Curly of The Three Stooges. It was written by Al Ruddy the producer of The Godfather and his experiences making the movie. So, most of it has gotta be true. Mike

The first car that I can remember my dad owning was a 1959 Sport Fury. I spent hours in that car pretending to drive it. I am looking for a model of the 59 but only 58 Chrisine is available. I have looked at some 59 promos, but they are in rough shape. If I can find a 59-back bumper, could it be grafted onto the 59? The biggest challenge looks like the fins on the 59 are skinner than the 58. Maybe I will just paint Christine the same colors. Only me and a Plymouth Fury expert would know the difference. Any advice? Mike The 59 is on top