rkeel Posted April 12, 2019 Posted April 12, 2019 On 4/4/2019 at 6:24 AM, am73grand said: Here's on I'm working on. The lightbar is just sitting there. I swapped out the kit hubcaps for an aluminum set from Parts by Parks. It's almost done. I'll post pics in the under glass section when it's finished. Looks good sir!! One suggestion, before you button that light bar down, might want to lower it a little closer to the roof. I drove several police cars with that very same Federal JetSonic, and they mount very close to the roof. So close that you couldn't really clean under them LOL!!
NYLIBUD Posted April 15, 2019 Posted April 15, 2019 The Panther platform P71 Crown Vic were the very best police cars on the road.But I love all year Vics.I just Like that boxy look.Great cars for sure.This is my 09.Well the bottom pic is.Just threw on those tail lights.The entire car was blacked out completely.No chrome.I Couldn't find a decent priced Marauder,so the Vic was the next best thing.Just Installed as set of Flowmasters,KnN filter.A couple of other things.Then I'll do a set of under drive pulleys.This is one scary fast,but fun car.I just really gotta watch my foot on that pedal.You tap it,and it just takes off.Talking about Monster torque.Crown Vics,,any year are just great cars,IMO.
martinfan5 Posted May 20, 2019 Posted May 20, 2019 Color me excited, I was given my review sample kit this past Saturday so I could a review video for it, Dwayne, you did a fantastic job
Merc-57 Posted May 21, 2019 Posted May 21, 2019 12 hours ago, martinfan5 said: Color me excited, I was given my review sample kit this past Saturday so I could a review video for it, Dwayne, you did a fantastic job Where can I watch the video?
Agent G Posted May 21, 2019 Posted May 21, 2019 On 4/14/2019 at 6:09 PM, NYLIBUD said: The Panther platform P71 Crown Vic were the very best police cars on the road.But I love all year Vics.I just Like that boxy look.Great cars for sure.This is my 09.Well the bottom pic is.Just threw on those tail lights.The entire car was blacked out completely.No chrome.I Couldn't find a decent priced Marauder,so the Vic was the next best thing.Just Installed as set of Flowmasters,KnN filter.A couple of other things.Then I'll do a set of under drive pulleys.This is one scary fast,but fun car.I just really gotta watch my foot on that pedal.You tap it,and it just takes off.Talking about Monster torque.Crown Vics,,any year are just great cars,IMO. Actually, no they weren't. The Ford CVPI went to the #1 spot due to GM ceasing production of the Caprice 9C1. They remained #1 in fleet sales due to the fact they were the only RWD, full frame, 4 door sedan in production between '96 and '11. Us cops liked that. The Caprice 9C1 with the LT1 engine consistently outperformed the Ford CVPI in all areas that mattered. The Fords were rugged and reliable, but they were slow. Also, they burned more oil than the retreating Iraqi army. This did lead to many a blown engine. I did it early one morning responding on a hot call right after roll call. The original '92-97 CVPI's, with the 4.6l engine, did not have any low end torque to speak of. It was all high RPM horsepower. About the time I was really getting rolling in one, I had to slow or stop at the next intersection. They were also very unstable at speed. After the rock solid Caprice, you felt you were ice skating when driving a '92-'97 Ford. After the introduction of the Watts link rear end in '98, the car handled a lot better. It would still swap ends in a heartbeat though. Ford did retune the system for more low end torque. The Caprice was notoriously front end heavy. She would oversteer like a B at times. Young coppers unfamiliar with RWD scared the you know what out of themselves the first time they punched it a LT1, 9C1. Early Caprices overheated at the drop of a hat in Midwestern summers. Brakes were sketchy early on. They got better in later years. GM's replacement for the Caprice, the 2000 FWD Impala is and remains an evil handling, slow POS. Great detective cars, I drive one now BTW, but awful radio cars. I cannot even imagine using one on the highway daily. As retail cars, the Panther platform was a beast. I drove a Lincoln Town Car for 12 years with little problems. I still miss that beast. G
Maindrian Pace Posted May 21, 2019 Posted May 21, 2019 (edited) The Panther got a lot better with the suspension redesign in 2003 that included an aluminum front crossmember and control arms, rack and pinion steering, 13" brakes, and 17" wheels. I've driven a few of those, including a rare opportunity to drive a brand new '06 with 45 miles on it, and it was kinda quick (4.6 liters will never really be happy dragging 4,000 pounds around) but the handling and braking were very good, with some penalty to ride quality. Those final iterations were very specialized cars, and the cops I've spoken to really liked them, with the only occasional complaint being power. Practically indestructible, even in police use, many departments still have them in their fleets; including my city of Mesa, some of which are ten years old. They stockpile parts and they have a favorite body shop whose owner is a Panther enthusiast himself, and keeps them looking mint at all times. It is nice still seeing them in traffic. Edited May 21, 2019 by Maindrian Pace Correct year of car
Rob Hall Posted May 21, 2019 Posted May 21, 2019 I've never driven a police spec one, but have driven many Grand Marquis and Town Car rentals over the years...always liked them, though it's too bad Ford never updated the cabin tech..they seemed very dated in spec.
NYLIBUD Posted May 21, 2019 Posted May 21, 2019 Well, as I said,before,this is one very fast four door full size car..Just the other day,I got it up to about 125.Holy cow was that fun,but I don’t think I’ll be doing that again for a while.Pheeewww??.
martinfan5 Posted May 21, 2019 Posted May 21, 2019 13 hours ago, Merc-57 said: Where can I watch the video?
Greg Wann Posted August 4, 2019 Posted August 4, 2019 A new body mold is needed. Mike gave a new master a good going over. He added more vitamins and minerals and improved the taste too. Please give Mike a standing ovation for all he does for us, and another thank you to Dwayne too for creating this kit for the modeling community. I will be updating some molds for other parts too. I have another pair of hands in my shop to help out as well. Marty is helping when he has the time and lives closer to me than Mike does.
DEL Posted August 5, 2019 Author Posted August 5, 2019 Looks great! *sniff* My baby's growin' up!! Nah, a new set of molds was finally needed and Mike Schnur gave the 'ol girl a little love and attention around the wheel wells. Added a different kind of wheelip molding too as seen. As always many thanks to Mike for his support and help in so many ways, and especially to Greg on the casting. The solid, REAL artistry in that work there. Welcome too to Mr. Marty for giving Greg a much needed extra set of hands and energy to the project. My thanks to all, as always. And thank you to any and all above who expressed kind views on my original work, in case I missed anyone. Although it's next to impossible to make everyone happy, I hope most are if that is at all possible. As the words of wisdom printed above the urinal once said: We aim to please, your aim will help! Words I try to live by! ..hmm ..wait a sec..
American 185 Heavy Posted August 5, 2019 Posted August 5, 2019 Beautiful execution and casting. Now do the civilian version with wide rocker moldings, wheel covers or cast wheels and vinyl top and I would be seriously interested. The state and police body never caught my eye or mattered that much to me. And not really wanting to make wide rockers, the Crown roof, or hunt up cast aluminum wheels !!!
Greg Wann Posted August 6, 2019 Posted August 6, 2019 The body does look really nice. When this mold is done and working like I want I will get a copy prepped for another mold. This way I plan to have two good molds operational. We want a CV in every display case.
Greg Wann Posted August 6, 2019 Posted August 6, 2019 21 hours ago, DEL said: Looks great! *sniff* My baby's growin' up!! Nah, a new set of molds was finally needed and Mike Schnur gave the 'ol girl a little love and attention around the wheel wells. Added a different kind of wheelip molding too as seen. As always many thanks to Mike for his support and help in so many ways, and especially to Greg on the casting. The solid, REAL artistry in that work there. Welcome too to Mr. Marty for giving Greg a much needed extra set of hands and energy to the project. My thanks to all, as always. And thank you to any and all above who expressed kind views on my original work, in case I missed anyone. Although it's next to impossible to make everyone happy, I hope most are if that is at all possible. As the words of wisdom printed above the urinal once said: We aim to please, your aim will help! Words I try to live by! ..hmm ..wait a sec.. We are looking forward to doing more projects with you, Dwayne. Your master making abilities are very, very good.
DEL Posted August 6, 2019 Author Posted August 6, 2019 That's very kind of you Greg, Thank you.. Your cast work is superlative. I feel the same in return.
American 185 Heavy Posted August 13, 2019 Posted August 13, 2019 On 8/6/2019 at 6:47 AM, Greg Wann said: The body does look really nice. When this mold is done and working like I want I will get a copy prepped for another mold. This way I plan to have two good molds operational. We want a CV in every display case. Yes it does. Looking forward to the retail version. Will grab one myself then. This one is great looking but interests me not because of no half vinyl, crown molding, or wide rockers. But if one like that is cast, count me in !!
Maindrian Pace Posted August 14, 2019 Posted August 14, 2019 That stuff would all be really easy to add with styrene strip. The stock full wheel covers are in the Lindberg jelly bean CV kit. Whitewall stickers, and you're in full AARP regalia.
Tom Geiger Posted August 14, 2019 Posted August 14, 2019 This was my '89 Crown Vic that was originally my grandfather's car. Since Dwayne and Greg have gotten me so close to my car (yes, I bought one and have received it), it's easy work to add the moldings. And I had wire wheel covers, not the aluminum wheels.
DEL Posted August 14, 2019 Author Posted August 14, 2019 17 hours ago, Maindrian Pace said: full wheel covers are in the Lindberg jelly bean CV kit. Whitewall stickers, and you're in full AARP regalia.
Greg Wann Posted October 26, 2019 Posted October 26, 2019 We have been working to create new molds for parts to this kit. I clayed up a six pack of these little boogers, they are the hood ornaments. This is the first set I have made. Due to them getting lost or broken easily I have been adding a six pack with each hood. I might have whipped the problems with clear resin too, it is a real pita. Everybody that wants one or two or more will get them, it is just taking a good bit of time. Greg
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now