mikemopar70 Posted January 6, 2018 Share Posted January 6, 2018 Hi folks! Here's my new project. In fact it's been started 2 years ago, i decided to build it as a used up feathers edition (white) Th body has been primed with urethane to prevent the bodywork to show with time, especially on the Hood! it's a kit that shows its age a lot, but with a lot of patience, it will end as a great model. I opted for resin wheels and tires from Fireball Modelworks, they're just beutiful! Next step, white paint! The truck will have a worn look, rusted underside and a bit faded paint with rust spots in a few places. Quote Link to comment Share on other sites More sharing options...
Warren D Posted January 6, 2018 Share Posted January 6, 2018 Looks great so far! Quote Link to comment Share on other sites More sharing options...
bill lanfear Posted January 6, 2018 Share Posted January 6, 2018 I like it! Love the wheels and tires especially! The kit has a few things missing that was easy to remedy. master cylinder, radiator top to name a few. I used a plastic spoon to fill in the excessive hole in the firewall on mine. I built it with the same theme as yours. check it out under workbench or under glass (amt 72 k5 blazer). If you need any pointers on the spoon method, let me know! Quote Link to comment Share on other sites More sharing options...
mikemopar70 Posted January 28, 2018 Author Share Posted January 28, 2018 Here's a little progress on the Blazer. I applied a generic white basecoat, followed by PPG urethane Clearcoat. I then processed the decals, but unfortunately, i put them on the wrong side on the Hood!! But this mistake has brought me a solution to weather these, i first wanted to remove them with tape, but they were stuck hard on the Hood, i had to sand them with 600 grit, this step has shown that they were wearing just like real decals with colors fading, just like i wanted. I will now process this tip to all the decals on the kit (upper portion only) to make the look like they've worn out with sunshine. I will then apply some flat and semi-flat clear over the body and complete with proper wash and pigments to show wear. For the grille, i painted it with Alclad chrome over a satin blue base and followed by a Vallejo acrylic black wash. More to come and thank's for the comments! Quote Link to comment Share on other sites More sharing options...
espo Posted January 29, 2018 Share Posted January 29, 2018 I like your Decal work. Very nice looking build. Quote Link to comment Share on other sites More sharing options...
Mr mopar Posted January 29, 2018 Share Posted January 29, 2018 Looking good ,I have only seen one of the real deal in my life in Orville ,CA in 1972 it sure stuck in my memory .I want to do one but 2 wheel drive . Quote Link to comment Share on other sites More sharing options...
mikemopar70 Posted January 29, 2018 Author Share Posted January 29, 2018 Thank's for the kind coments! Here is a few pictures with slightly weathered decals.. I like the result, now, i will do the weathering washes and pigments!! Quote Link to comment Share on other sites More sharing options...
DumpyDan Posted February 3, 2018 Share Posted February 3, 2018 That truck looks real nice, so much going on Quote Link to comment Share on other sites More sharing options...
DRIPTROIT 71 Posted February 5, 2018 Share Posted February 5, 2018 Very Awesome!! Those wheels look like the real thing! Quote Link to comment Share on other sites More sharing options...
disconovaman Posted February 7, 2018 Share Posted February 7, 2018 I live the faded weathering look. I guess by putting the decals on incorrectly became the perfect mistake. The wheels and tires are a nice touch. Amt wishes those were in the kit cause that would be a great selling point. Keep up the good work it's looking nice. Quote Link to comment Share on other sites More sharing options...
Jantrix Posted February 7, 2018 Share Posted February 7, 2018 Very convincing. Looking forward to more. Quote Link to comment Share on other sites More sharing options...
Ron Hamilton Posted February 10, 2018 Share Posted February 10, 2018 I really like that Blazer. I may do one just like it. I have those decals the wheels and Tires and the kit. I was having some work done on my one-to-one Silverado, and the chassis looks similar with that patina. I may do all of my builds like that . Quote Link to comment Share on other sites More sharing options...
mikemopar70 Posted February 16, 2018 Author Share Posted February 16, 2018 Thank's for comments, here is a picture of the completed weathering on the chassis, a bit of body color ang primer gray before afflying pigmets and washes to achieve a more realistic look!! Only remaining work is oïl leaks and a bit of mud!! Quote Link to comment Share on other sites More sharing options...
kelson Posted February 16, 2018 Share Posted February 16, 2018 Nice weathering on the chassis. Quote Link to comment Share on other sites More sharing options...
mustang1989 Posted February 18, 2018 Share Posted February 18, 2018 Wow!!!!! I really like this one and I like those wheels as well. Great work so far. Quote Link to comment Share on other sites More sharing options...
mikemopar70 Posted February 22, 2018 Author Share Posted February 22, 2018 Thanks for the kind comments, I worked on a home made front push bumper for my truck, I did it police style, it will wear some Fireball Modelworks KC highlights . I Thought that this kind of truck will wear it just perfect, and be a nice addition! I did it scratch built with Evergreen plastic. Its now temporarily fixed to the frame, in fact it will be closer to the grille and a bit higher too.. This Project is nearing completion, I think it will be at next NNL EAST.. I'm now working on the interior, pictures next time! See ya! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.