What Did You Accomplish Today? (Model Car Work)

[JollySipper]

Final primer on the NSX.......... Rustoleum primer really is good to work with. It sands smooth and holds up to the lacquer paints really well. Just steer away from using their paints for bodies! This will get DupliColor..........

 

[Ace-Garageguy]

Not much, but seein' as how I needed to clean the bench off again to do more work on the 1:1 DeLorean panel, and as I'm inspired by Dave B's Cheetah build, I figgered I'd do a quick mockup of my Cox Cheetah, the same basis Dave started with. Wheels and tires are from an Accurate Miniatures GS Corvette, maybe a little too heavy for the Cheetah.

...and as I had the oven cleaner out anyway, I stripped it before putting it back on the shelf of doom. This one was a complete slotcar.

 

Edited Tuesday at 09:39 PM by Ace-Garageguy

[meechum68]

Check my post  on the 47 Chevy Aerosedan. 

But here's what else I got done, some work on the wife's 57 Fairlane.  Color is Pink/Gold Iridescent PS-47 over Tamiya Pink Primer.  Funny part is ... under some light it looks copper/brassy, under other it looks like Rose Gold.  I hope I don't have to throw it in the pond again for another color change. Wife is unsure about it atm.  

If she keeps it like it is, I have to do some wet sanding, I got some finger prints in it, and a couple dust bunnies, then will reshoot it, if not then pond and another color choice. 

 

[1959scudetto]

Tried to fabricate a horizontal carburettor system for my Lola T70 spider...

[FoMoCo66]

46 minutes ago, 1959scudetto said:

Tried to fabricate a horizontal carburettor system for my Lola T70 spider...

I would say you succeeded on the carbs, they look good.

[meechum68]

2 hours ago, 1959scudetto said:

Tried to fabricate a horizontal carburettor system for my Lola T70 spider...

That is slick work my friend! Nailed it!! 

[meechum68]

No pics, but did some grinding on the inside of the 47 front fenders, and it looks like I will have to do a bit more to get things to sit, will likely post tomorrow after I get more bench time. 

 

[gtx6970]

Finally test fit of all the pieces.

 

Should be done 1st of next week

( fingers crossed ) 

 

Just noticed. I need to pain the headliner ( So there IS a reason I take pictures,, to see things I didnt see ) 

Edited 5 hours ago by gtx6970

[1959scudetto]

20 hours ago, FoMoCo66 said:

I would say you succeeded on the carbs, they look good.

 

18 hours ago, meechum68 said:

That is slick work my friend! Nailed it!! 

Thanks guys, it didn't turn out as bad as i feared it would be. I think it will be workable.