MarkJ Posted October 3, 2021 Author Share Posted October 3, 2021 14 hours ago, Pierre Rivard said: Hey Mark, I am totally amazed by all the fab work you do on your models. It inspires me to try to stretch myself a bit. I purchased Tamiya white today, yeah! Not ready to get into decal making though, I would not know where to start. Your fabulous work inspires me my friend! Pierre, If I can make decals, you can make decals. You just need a vector graphics program like Photoshop. I was lucky . I got my Adobe Photodeluxe 2.0 bundled with the scanner I bought back in the 90's. So it was basically free. It just takes a while playing with it to take an image from the internet and turn it into a decal image that is 600 pixels per inch. you then print it on decal paper, future the decal paper with a brush and then cut them out and put them on the model. the program basically cleans up the image so you can use it as a decal. You just have to find side shots of cars so you will have a flat image to work with. It also helps to have a Laser printer with a ghost white printer cartridge, so you can make white background decals to place your color decals on top of. If not the decal disappears on a dark colored car . If its a white car the decal works fine without the white background decal. I hear that vector graphics programs nowadays are very expensive. You could do it ,my friend, if you really want to. Sometimes you just cant find the decals you want, because the professional decal maker doesn't choose to make them. There are some out there that will do a one off special sheet for you but they are few and far between. Dont rule out making your own, you could make it happen. Thanks for the kind words. Quote Link to comment Share on other sites More sharing options...
slusher Posted October 4, 2021 Share Posted October 4, 2021 I like the beginning of the dash work.. Quote Link to comment Share on other sites More sharing options...
MarkJ Posted October 4, 2021 Author Share Posted October 4, 2021 10 hours ago, slusher said: I like the beginning of the dash work.. Thanks, Carl. It's pretty close to what I was looking for. When you see the roll cage you're going to think I messed up . The right side of the cage is not close to the right door at all. I Have no idea why they did it that way, but I'm going to have to do it. I think it has to do with the unibody construction because they used the stock Camaro to make this race car. Seems pretty unsafe to me. Quote Link to comment Share on other sites More sharing options...
MarkJ Posted October 7, 2021 Author Share Posted October 7, 2021 Got the body to fit to the chassis/interior. Still going to have to do some fixes here and there to get it right. Quote Link to comment Share on other sites More sharing options...
TransAmMike Posted October 7, 2021 Share Posted October 7, 2021 Well Mark, you continue to impress my friend!!👌 Quote Link to comment Share on other sites More sharing options...
Anglia105E Posted October 7, 2021 Share Posted October 7, 2021 Nice clear distinction between the cream body and the red chassis, Mark, that shows you how good the fit is. Some areas may not fit so well ! David Quote Link to comment Share on other sites More sharing options...
MarkJ Posted October 7, 2021 Author Share Posted October 7, 2021 Thanks, Mike and David. I really appreciate your interest in the build. Got the main hoop of the cage , in the rear seat area, installed . everything else builds off of it. Will try to post some pics this afternoon. Quote Link to comment Share on other sites More sharing options...
MarkJ Posted October 9, 2021 Author Share Posted October 9, 2021 Don't know if you guys use this trick when building your cages, or whenever you need to bend a tube, but putting wire in it helps keep it from breaking when bent and also helps you keep the bend you choose by keeping the tube from rebounding to straight. Got started on the cage. I know it looks off center, but I will explain why I think the real cars cage was made this way, when the model is finished, and I give the story of the build in the under glass section, when finished. Quote Link to comment Share on other sites More sharing options...
slusher Posted October 10, 2021 Share Posted October 10, 2021 Mark. Your scratch building on the interior is awesome! Quote Link to comment Share on other sites More sharing options...
Pierre Rivard Posted October 10, 2021 Share Posted October 10, 2021 What a neat way to do a roll cage. What sizes of evergreen tube and type/size of wire do you use. Such a great idea! Thanks for sharing sir. Quote Link to comment Share on other sites More sharing options...
MarkJ Posted October 10, 2021 Author Share Posted October 10, 2021 30 minutes ago, Pierre Rivard said: What a neat way to do a roll cage. What sizes of evergreen tube and type/size of wire do you use. Such a great idea! Thanks for sharing sir. Thanks Carl and Pierre. Pierre, the tube is 3/32 inch evergreen tube and the wire is just an old roll that has no marking on it, but it fit inside the tube so I used it. Got a lot more done yesterday and will try to add more photos today. Quote Link to comment Share on other sites More sharing options...
Gramps46 Posted October 10, 2021 Share Posted October 10, 2021 Excellent tip on bending the roll cage. Thanks for sharing. Quote Link to comment Share on other sites More sharing options...
MarkJ Posted October 10, 2021 Author Share Posted October 10, 2021 17 minutes ago, Gramps46 said: Excellent tip on bending the roll cage. Thanks for sharing. You're welcome, Gary. Thanks for the feedback. Quote Link to comment Share on other sites More sharing options...
MarkJ Posted October 11, 2021 Author Share Posted October 11, 2021 Cage is almost finished. Just a couple of more bars. Quote Link to comment Share on other sites More sharing options...
MarkJ Posted October 13, 2021 Author Share Posted October 13, 2021 Quote Link to comment Share on other sites More sharing options...
Pierre Rivard Posted October 14, 2021 Share Posted October 14, 2021 That interior is coming along really nice! What material are you using for the black seat padding? Quote Link to comment Share on other sites More sharing options...
MarkJ Posted October 14, 2021 Author Share Posted October 14, 2021 55 minutes ago, Pierre Rivard said: That interior is coming along really nice! What material are you using for the black seat padding? Thanks, Pierre. Its a sheet of thin foam rubber called Silly Winks. Comes in 12x18 inch, 2mm thick sheets. Have no idea where the name comes from but I purchased them at Hobby Lobby a while back. They might not sell them anymore. I installed them with Elmers glue, and trimmed them with a small scissors. Quote Link to comment Share on other sites More sharing options...
MarkJ Posted October 14, 2021 Author Share Posted October 14, 2021 Quote Link to comment Share on other sites More sharing options...
MarkJ Posted October 15, 2021 Author Share Posted October 15, 2021 Quote Link to comment Share on other sites More sharing options...
Venom Posted October 15, 2021 Share Posted October 15, 2021 That is awesome stuff Mark! Quote Link to comment Share on other sites More sharing options...
MarkJ Posted October 15, 2021 Author Share Posted October 15, 2021 3 hours ago, Venom said: That is awesome stuff Mark! thanks, Josh. I really appreciate the feedback. Quote Link to comment Share on other sites More sharing options...
MarkJ Posted October 18, 2021 Author Share Posted October 18, 2021 Quote Link to comment Share on other sites More sharing options...
slusher Posted October 19, 2021 Share Posted October 19, 2021 Impressive scratch building! Wish I had your talents.. Quote Link to comment Share on other sites More sharing options...
MarkJ Posted October 19, 2021 Author Share Posted October 19, 2021 15 minutes ago, slusher said: Impressive scratch building! Wish I had your talents.. Thanks, Carl. I start out saying, I'm not doing anything to the interior but a roll cage, but always keep adding extra stuff that you really cant see that much when the model is finished. I guess I'm scared to finish the darned thing. Afraid of what it might look like. Quote Link to comment Share on other sites More sharing options...
Pierre Rivard Posted October 19, 2021 Share Posted October 19, 2021 What...afraid of success? I have no worries this will be another great build! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.