Risto Posted February 17, 2011 Posted February 17, 2011 WOW !!! Got mine about a week ago and I couldn't be happier!! Well maybe, if I had gotten two. The body looks and feels like plastic, and the only air bubbles I see are in the headliner. Not a biggie for me as those won't be visible, should I ever get to finish this. The kit comes with two tiny clear back up lights and two clear parking lights(?) for the grille, vacuformed front and rear windows and vacuformed back up light and parking lights(these might be dropped from the kit as he includes separate clear parts), separate bucket seats and a separate rear seat, separate door panels and the dashboard, steering wheel, front and rear bumpers, separate grill for the front bumper, four Chrysler recall mags, chassis plate and the photo etch fret with five Chrysler scripts(two sizes), two sets of T, H, R, E, E, H, U, N, D, R, E, D letters and two 3, 0, 0 numbers and the body and separate hood with molded on reinforcements. The body has the Chrysler and three hundred scripts molded on and 300 is molded on the rear bumper taillight panel. Detailed firewall is molded to the body. Open door handles are molded to the body as well. The builder will need to source suitable parts from a donor kit for the engine and transmission and front and rear suspension pieces plus bits and pieces for the engine compartment. Revell's 1968 Charger could donate the running gear and plated door handles and rear axle. Front suspencion pieces will need modification though, as Juha used the front half of the chassis plate from the MPC '65 Monaco(?) and the rear half of the Revell '69 Charger to create the longer wheelbase for this Chrysler. If You put the Revell chassis side by side with this, there is a difference of about 1,5 cm. All in all I am very happy with this and will definitely get me another one. Since the pics are too large, here is a link to the rest of the pics: http://public.fotki.com/Letukkamies/2011-02-13-air-trax/#media Contact Tapani, in case You would like to get one. These sell for 90Euros + shipping.
Danno Posted February 17, 2011 Posted February 17, 2011 Wow! Now, if he would just offer a 4 door sedan ...
george 53 Posted February 17, 2011 Posted February 17, 2011 180 bucks PLUS shipping? I'll stay with my not so perfect R&R for that price.
The Creative Explorer Posted February 17, 2011 Posted February 17, 2011 90 euro is about 120 dollars, but still spendy for a resin-body
Casey Posted February 17, 2011 Posted February 17, 2011 90 euro is about 120 dollars, but still spendy for a resin-body Since Juha Airio did the master, you know it's going to be spot on in every way. Excellent work comes at a price. If you want the best, you have to be willing to pay for it, and I suspect quite a few people will be willing to pay. It looks beautiful.
mrmike Posted February 17, 2011 Posted February 17, 2011 (edited) How can I go about contacting Tapani as I have a friend who might be interested in this resin kit here in America? Edited February 17, 2011 by mrmike
Foxer Posted February 17, 2011 Posted February 17, 2011 How can I go about contacting Tapani as I have a friend who might be interested in this resin kit here in America? He's a member here .. go look in member's list for his name..
Risto Posted February 17, 2011 Author Posted February 17, 2011 Looks like You guys are a tough crowd to please. Juha did the original master for the All American Models '70 Chrysler 300 out of a '70 Impala. He designed it in a way, that it could later be turned into the Hurst version as well. Only very few of those AAM kits were ever made. Some years later it was copied by R&R. Sure he made some changes, but it is quite obvious it was cast from the AAM kit. The parts count is not the same as it was with the AAM kit, and some parts were completely redone, who knows why - as they aren't correct for the '70 Chrysler 300. Right now I can't remember how many parts are in the R&R piece, but if my memory serves me right, it wasn't many. OK, fast forward to 2009. Juha decides to redo the '70 as a '69. Several changes take place and the kit is further refined. He finds the time to create the artwork for the photoetch and has them done in another country and makes the vacuformed glass for it as well. Now the parts count for this kit is 21 + the vacuformed windows + the photoetch, not counting those vacuformed parking and backup lights, that probably will be deleted from the kit. The builder can choose to clue the hood shut like the R&R piece or leave it open to display the engine compartment. Your choice! I know I will be flaunting my engine, when I get to it. As for a four door sedan becoming available, it's highly unlikely. Juha did the car twice, and I suspect it won't happen again. He's got other items in the works. There is a European four door sedan with fins and a flathead about to be cast next. It will be awhile before it's ready though. Can hardly wait for it myself. The price is comparable to the quality of Juha's castings. The parts look like grey plastic and there is the photoetch to sweeten the deal. In my opinion this kit rates the highly recommended rating! Tapani is the other half of Air-Trax and You can contact him at raurata@yahoo.com . Tim Boyd was the first one in America to receive this kit, those in doubt can ask for his opinion about this kit. Juha is a friend of mine and my opinion might be biased, but ask around and You will find out more about his products. I couldn't be happier!!
Ron Hamilton Posted February 17, 2011 Posted February 17, 2011 From what I see, this is one beautiful kit. I have one of the AAM 1970 Chrysler 300 kits in my collection to be built. I have decided on the color combo for it. I am waiting for the weather to warm up so I can paint it. Sure the kit is expensive, but it is a unique subject, and everything fits.
jeffb Posted February 18, 2011 Posted February 18, 2011 expensive..maybe..but where ya gonna get one, much less this well done..i hope someday to master/cast half as good as this
A12Runner Posted February 27, 2011 Posted February 27, 2011 That kit looks amazing. I used to have a real 69 300 when I was 18 and I miss that car so bad. Looks like I will have to start saving.
exnyman Posted February 27, 2011 Posted February 27, 2011 The price is certainly a little steep but....look at the photos, this has an enormous amount of detail and is of a subject not yet done. And if Juha in fact used a 70 Impala as his starting point, all I can say is he did an amazing job in transforming one to the other. I would think the front end of a 69 Impala would have been easier to convert as it also used a loop type bumper but either way, Juha once again, has proven he has extraordinary talent. While it isn't in the budget right now, I can see getting one of these in the forseeable future.
montelsc Posted February 27, 2011 Posted February 27, 2011 WOW !!! Got mine about a week ago and I couldn't be happier!! Well maybe, if I had gotten two. The body looks and feels like plastic, and the only air bubbles I see are in the headliner. Not a biggie for me as those won't be visible, should I ever get to finish this. The kit comes with two tiny clear back up lights and two clear parking lights(?) for the grille, vacuformed front and rear windows and vacuformed back up light and parking lights(these might be dropped from the kit as he includes separate clear parts), separate bucket seats and a separate rear seat, separate door panels and the dashboard, steering wheel, front and rear bumpers, separate grill for the front bumper, four Chrysler recall mags, chassis plate and the photo etch fret with five Chrysler scripts(two sizes), two sets of T, H, R, E, E, H, U, N, D, R, E, D letters and two 3, 0, 0 numbers and the body and separate hood with molded on reinforcements. The body has the Chrysler and three hundred scripts molded on and 300 is molded on the rear bumper taillight panel. Detailed firewall is molded to the body. Open door handles are molded to the body as well. The builder will need to source suitable parts from a donor kit for the engine and transmission and front and rear suspension pieces plus bits and pieces for the engine compartment. Revell's 1968 Charger could donate the running gear and plated door handles and rear axle. Front suspencion pieces will need modification though, as Juha used the front half of the chassis plate from the MPC '65 Monaco(?) and the rear half of the Revell '69 Charger to create the longer wheelbase for this Chrysler. If You put the Revell chassis side by side with this, there is a difference of about 1,5 cm. All in all I am very happy with this and will definitely get me another one. Since the pics are too large, here is a link to the rest of the pics: http://public.fotki.com/Letukkamies/2011-02-13-air-trax/#media Contact Tapani, in case You would like to get one. These sell for 90Euros + shipping. id like to see it when its done put it in the under glass section
charlie8575 Posted February 28, 2011 Posted February 28, 2011 Take a look at the Photobucket album for this thing. It's impressive. If I have $180 to spend on one single model, I'd get this in a second. Charlie Larkin
Risto Posted February 28, 2011 Author Posted February 28, 2011 Guys, 90Euros equals around $123 today here in Finland. I don't know how You've come up with the 180? I still think it is worth every dime!
george 53 Posted February 28, 2011 Posted February 28, 2011 Guys, 90Euros equals around $123 today here in Finland. I don't know how You've come up with the 180? I still think it is worth every dime! Risto, that's my fault, I thought you just double the cost to change it from Euro's. Sorry 'bout that. But with Postage and Handeling from europe, it STILL comes out to too much for me. I have the R&R version, but it;ll NEVER be as nice as yours. Sorry 'bout the mix up.
Marc @ MPC Motorsports Posted February 28, 2011 Posted February 28, 2011 What a beautifully crafted and cast model! Risto, see if you guys can persuade Juha to master another 1973 Pontiac Grand Am and have it cast by Air-Trax. I'd buy at least two!!!
george 53 Posted February 28, 2011 Posted February 28, 2011 OKAY, NOW we're talkin!! THAT would be WORTH the price to me, and I WOULD pay the price for one (ok, probably two) of THOSE! That Pontiac is what first made me go CRAZY over Juha's models. I'd GLADLY buy one!!!!(or MORE)
Ron Hamilton Posted October 6, 2019 Posted October 6, 2019 On 2/17/2011 at 6:13 AM, Risto said: WOW !!! Got mine about a week ago and I couldn't be happier!! Well maybe, if I had gotten two. The body looks and feels like plastic, and the only air bubbles I see are in the headliner. Not a biggie for me as those won't be visible, should I ever get to finish this. The kit comes with two tiny clear back up lights and two clear parking lights(?) for the grille, vacuformed front and rear windows and vacuformed back up light and parking lights(these might be dropped from the kit as he includes separate clear parts), separate bucket seats and a separate rear seat, separate door panels and the dashboard, steering wheel, front and rear bumpers, separate grill for the front bumper, four Chrysler recall mags, chassis plate and the photo etch fret with five Chrysler scripts(two sizes), two sets of T, H, R, E, E, H, U, N, D, R, E, D letters and two 3, 0, 0 numbers and the body and separate hood with molded on reinforcements. The body has the Chrysler and three hundred scripts molded on and 300 is molded on the rear bumper taillight panel. Detailed firewall is molded to the body. Open door handles are molded to the body as well. The builder will need to source suitable parts from a donor kit for the engine and transmission and front and rear suspension pieces plus bits and pieces for the engine compartment. Revell's 1968 Charger could donate the running gear and plated door handles and rear axle. Front suspencion pieces will need modification though, as Juha used the front half of the chassis plate from the MPC '65 Monaco(?) and the rear half of the Revell '69 Charger to create the longer wheelbase for this Chrysler. If You put the Revell chassis side by side with this, there is a difference of about 1,5 cm. All in all I am very happy with this and will definitely get me another one. Since the pics are too large, here is a link to the rest of the pics: http://public.fotki.com/Letukkamies/2011-02-13-air-trax/#media Contact Tapani, in case You would like to get one. These sell for 90Euros + shipping. I bought one a few years back and I can say it's GORGEOUS!
restoman Posted October 6, 2019 Posted October 6, 2019 I bought the '69 300, as well as his '78/'79 Chrysler, and while I haven't started the '69 yet, it's close to the top of the heap. I owned a '69 Chrysler that I cloned into a 300 back in the mid to late '80s, and the resin kit is pretty much spot-on as far as I can see. Mine will be a bit of a custom, the way my 1:1 was. Never finished the 1:1 version but the resin one will be! The '78/'79 Chrysler is very nice as well, and is active on my bench. IIRC, I think I spent close to $300 CDN for both kits and shipping to Canada. I don't regret spending a nickel of that.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now