Deathgoblin Posted October 8, 2013 Share Posted October 8, 2013 Nice! I'll have to pick up one of these. Quote Link to comment Share on other sites More sharing options...
hvymtl Posted October 8, 2013 Share Posted October 8, 2013 (edited) Someone give me the codes here today or so and i will get to our PPG paint computer and compare formulas And count me in for a few of these also MIchael Edited October 8, 2013 by hvymtl Quote Link to comment Share on other sites More sharing options...
Casey Posted October 8, 2013 Share Posted October 8, 2013 Are the rear wheels newly created? I think all of the previous Lindberg '64 Mopar S/S kits included steel rear wheels only. Quote Link to comment Share on other sites More sharing options...
Mike Kucaba Posted October 8, 2013 Share Posted October 8, 2013 I saw this car run in late '64 against Dick Brannans then newly built 427(not SOHC) at U.S. 30 Dyer,IN I remember commenting what an ugly color combo on it. I believe, and going on memory here, that the red was a brown or at least a very dark maroon. As an aside, And IMHO the derogatory remarks about Fred Cady decals was uncalled for. Fred was a fixture at the Chicago area shows and I sometimes had the pleasure to be a "table neighbor". Just remember, before Cady decals there was no one else! Quote Link to comment Share on other sites More sharing options...
afxmustang Posted November 1, 2013 Share Posted November 1, 2013 (edited) Most of the factory '64 wedge cars were hardtops. All of the factory hemi cars were 2 door sedans. Many of the hardtops were updated with the hemi. The Larry Davis Super stock book had lots of errors. One of them was the color of the Lawman. It was not candy red. As a person who saw the car in person in 1964 I can say for sure that it was bronze and not red. The Aed car has a slight red look to it which is due to the lighting when the photo was taken. Turbine Bronze Metalic was used on Plymouth engines in 1958 but I'm guessing that the car might have painted by the Alexander Brothers so it could have been some custom mix. Looks like the same color was used on the Golden Commandos cars in 1965. Edited November 1, 2013 by afxmustang Quote Link to comment Share on other sites More sharing options...
hack-n-whack Posted November 2, 2013 Share Posted November 2, 2013 At I-Hobby 2013 in Chicago, at the Round 2 booth there was a built-up of The Lawman kit with a release date of June 2014 ( maybe July '14?). Quote Link to comment Share on other sites More sharing options...
jjsipes Posted August 21, 2014 Share Posted August 21, 2014 Anything new on this? Just wondering. Quote Link to comment Share on other sites More sharing options...
Brett Barrow Posted August 21, 2014 Share Posted August 21, 2014 I asked Round2 a few weeks ago, they said it's still on, just bumped to 2015. They said that this announcement had been a little ambitious based on what they had been told before the sale and once they actually took over the Lindberg line they've reassessed the timeframe. Quote Link to comment Share on other sites More sharing options...
Casey Posted October 12, 2015 Share Posted October 12, 2015 Pic courtesy of Tim Boyd's NNL Toledo coverage, but this is good news. I was really wondering if this was ever going to see the light of day: Quote Link to comment Share on other sites More sharing options...
Chuck Kourouklis Posted October 12, 2015 Share Posted October 12, 2015 VERY kool, and here's what grabs me from that shot:this body shell has always had a big ol' kink in the belt line right at the C-pillar that I'm not making out in this photo! Wonder if the builder leveled that or Round2 did... Quote Link to comment Share on other sites More sharing options...
Ace-Garageguy Posted October 12, 2015 Share Posted October 12, 2015 VERY kool, and here's what grabs me from that shot:this body shell has always had a big ol' kink in the belt line right at the C-pillar that I'm not making out in this photo! There still seems to be a big ol' wobble in the character line on the door... Quote Link to comment Share on other sites More sharing options...
pack rat Posted October 12, 2015 Share Posted October 12, 2015 this body shell has always had a big ol' kink in the belt line right at the C-pillar that I'm not making out in this photo! Wonder if the builder leveled that or Round2 did...I believe that would be the builder. The built-up at Toledo was done before Round2's purchase of the Lindberg tooling Quote Link to comment Share on other sites More sharing options...
tim boyd Posted October 13, 2015 Share Posted October 13, 2015 I believe that would be the builder. The built-up at Toledo was done before Round2's purchase of the Lindberg toolingThis could possibly be the original proposal buildup that Bill Coulter did for Lindberg's management way back in the day....at least ten years ago.... TB Quote Link to comment Share on other sites More sharing options...
Casey Posted October 13, 2015 Share Posted October 13, 2015 It will be interesting to see how the copper stripes/painted areas are handled by Round2. A few might be able to be done as decals, but it looks like a lot of masking an painting will be required. Quote Link to comment Share on other sites More sharing options...
SteveG Posted October 13, 2015 Share Posted October 13, 2015 This could possibly be the original proposal buildup that Bill Coulter did for Lindberg's management way back in the day....at least ten years ago.... TB Actually it is the original proposal buildup that was on display at iHobby 2009. It's just a little late .... Per John G. all the Super Stock parts for this kit are new tooling due to bad planning from when Lindberg first designed these kits. Their 64 Plymouth and Dodge kits were completely separate tooling. They were never designed to share parts between the two. That's always been the reason for the delays. -Steve Quote Link to comment Share on other sites More sharing options...
tim boyd Posted November 16, 2015 Share Posted November 16, 2015 Update per John G. at Round 2, as of today 16 November 2015: "The kit IS scheduled for 2016 release and should be in modelers' hands sometime in June if not sooner. Required parts are being newly tooled currently to improve the kit over the original mockup that has been shown. A new retro box illustration has been completed and it's only a matter of time."Cheers...TIM Quote Link to comment Share on other sites More sharing options...
bismarck Posted November 16, 2015 Share Posted November 16, 2015 Just when I thought it was safe to leave the house with my wallet... Another "must have" kit .I couldn't call myself a true Mopar fan without it. Quote Link to comment Share on other sites More sharing options...
High octane Posted November 16, 2015 Share Posted November 16, 2015 Well so what if the Lawman kit is a little late, I'm not out of un-built model kits yet, are you? Quote Link to comment Share on other sites More sharing options...
louie Posted November 16, 2015 Share Posted November 16, 2015 Again Tim, Thank you for keeping us informed. I for one appreciate it very much and I am sure that I am not alone. I am a very patient person but knowing what is coming does help "a lot ". I am looking forward to this one and also looking forward a whole lot of other exellent models that are also right around the corner. Thank you. Jeff Quote Link to comment Share on other sites More sharing options...
Brett Barrow Posted November 17, 2015 Share Posted November 17, 2015 Quote Link to comment Share on other sites More sharing options...
Greg Myers Posted November 17, 2015 Share Posted November 17, 2015 Update per John G. at Round 2, as of today 16 November 2015: "The kit IS scheduled for 2016 release and should be in modelers' hands sometime in June if not sooner. Required parts are being newly tooled currently to improve the kit over the original mockup that has been shown. A new retro box illustration has been completed and it's only a matter of time." Cheers...TIM Tim, how about a thread about the other kits you talked about on the "other" board ? Quote Link to comment Share on other sites More sharing options...
tim boyd Posted November 17, 2015 Share Posted November 17, 2015 (edited) Tim, how about a thread about the other kits you talked about on the "other" board ? Greg...the info on the other board was actually posted first here at ModelCarsMag forum a couiple of days ago. It;s in the AMT/Round 2 2016 products thread. Thanks for asking/suggesting. For those that don't want to go searching for it, I posted the following at 7:29pm Saturday night: ***************** I had a nice visit with John G of Round 2 today. He OK'ed me passing along that the new Surf Woody kit will have extensive photography of the original car, an entirely new tooled set of drag slicks representing the 1/1 scale original, and matching "dual whitewall" pad printing on both the front tires and rear slicks. There will even be decaled representations of the murals on the inside of the Woody cab that were apparently on the original car. He also said that the '29A roadster reissue will use the "Mod Rod" version box art (this was the c.1969/70 reissue just before the '73 "Street Rod Series" version). The missing pieces of the original AlaKart will not be retooled, but all the gates will be opened which will provide a number of "bonus" parts. The kit will also include the antique racing options for the stock roadster version, which will provide a very convincing "Race of the Gentlemen" type model. These plans are tentative, of course, and subject to change. Finally John mentioned in broad terms some future projects they are investigating. Suffice it to say, these guys are very, very creative, Looks like the next couple of years will see no letup in Round 2's business model and as a result, we as builders appear to have much to look forward to. ************************************** Cheers...TIM s...TIM Edited November 17, 2015 by tim boyd Quote Link to comment Share on other sites More sharing options...
Greg Myers Posted November 17, 2015 Share Posted November 17, 2015 Thanks Tim, I couldn't find it, I knew you'd keep us up to date on these things. Thanks again. Quote Link to comment Share on other sites More sharing options...
Casey Posted February 7, 2016 Share Posted February 7, 2016 Quote Link to comment Share on other sites More sharing options...
Craig Irwin Posted February 7, 2016 Share Posted February 7, 2016 Pro Stock 64 Plymouth? Must be like those 429 Corvettes. Kidding aside, I'm glad to see this kit. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.