Belugawrx Posted November 25, 2014 Posted November 25, 2014 (edited) It's winter, Itchy scratchy its time to start building.... something! Everything is in lock up until I find my own place but,...... The new space efficient bench So out of all my unbuilts I choose this Yep... Try to make it a hardtop resto-mod but without the boxy top First I took off all the side trim and cut up the gross looking soft-top with a lot of filler and cutting down the front windshield surround it might, might....maybe look Fluid Thnx for looking and all QC+C's welcome and needed. Cheers Edited December 23, 2014 by Belugawrx
ChrisBcritter Posted November 26, 2014 Posted November 26, 2014 I was going to say I have a roof from a junked '62 promo that might help, but it looks like you're going in another direction. Good luck!
rsxse240 Posted November 26, 2014 Posted November 26, 2014 the top and windshield are the 2 reasons I've not started building mine. But it has come in quite handy for custom parts for other builds. I think with a little lower and more raked windshield, using the kit supplied tonneu cover, slick dark colored paint and as much chrome as possible, this car would be the BEST looking T-Bird ever. Keep it up, I can't wait to see what you do with it.
turn1wonder Posted November 26, 2014 Posted November 26, 2014 Wow! A wall-mounted laptop. Hope there is more trial than error on the windshield chop. Bob
Belugawrx Posted December 9, 2014 Author Posted December 9, 2014 *GroundHog Day* '79 Trans Am Cheers............... again
Belugawrx Posted December 11, 2014 Author Posted December 11, 2014 (edited) Enough trial Bob,.. to just put it away lol Found this '79 TA top I think will work Sail panel matches the laid back tonneau and seat angle,...so I'm in,.. after alot of sanding, fitting, filling...etc. I found some old Detail Master spinners which I think look much better!.. So bye bye rims to the Holey Spokes Test fit of glass to the roof .... Meh? just needs more scribing, sanding, filling, drawing, sanding...ad nauseum. Thanks Ken, yes I am using the tonneau as pkg shelf,..should be an interesting paint area!! I will keep working it because it is the only lump of styrene here! Everything else still in the U-Haul lock-up (2 miles away, but when the mood strikes..) And GAWD I hate Testors filler in a tube,...just sayin' Thanks for the comments guys,... Andy, Christopher, Carl as always Q,C+C's welcome Cheers Edited December 12, 2014 by Belugawrx
Belugawrx Posted December 12, 2014 Author Posted December 12, 2014 Wow! A wall-mounted laptop. Bob Perspective,... young Padawan
Belugawrx Posted December 19, 2014 Author Posted December 19, 2014 Found some more time to work on this... So while the putty dries on the body work I started the engine plumbing the fuel lines now, working on the fan/belt assembly... Also started on Chassis painting, and washes, bit of weathering to follow... So far not bad for an AMT kit....carburetors a nice surprise... Thnx for looking All Q,C+C's wwelcome Cheers
Belugawrx Posted December 21, 2014 Author Posted December 21, 2014 Weekend off so,.... more done! Chassis touched up with MM acrylic Engine grey,.. Wash with Tamiya Hull Red,.. Mr. ZIP graphite powder wiped into and all over,.... Found a MOFOCO decal in a mustang kit,... More work to the engine,.... need to straighten up that fuel reservoir (scratched),... This is starting to get FUN! Cheers
Belugawrx Posted December 22, 2014 Author Posted December 22, 2014 After much fiddling and sanding and even more dry fitting,... I have the glass situated,... Now I can pin and glue that roof down and start filling. The glass is so thick it distorts the view of the interior, so I've looked up vacu forming on this site and else where. Doesn't look too difficult so,... will try! Keep you posted Cheers
JTalmage Posted December 23, 2014 Posted December 23, 2014 I'd bring those front A pillars down just a touch. Give it more of a streamlined look. IMO
mustang1989 Posted December 23, 2014 Posted December 23, 2014 That engine is first class! Nice detail and weathering.
MeatMan Posted December 23, 2014 Posted December 23, 2014 Nice start. Looks like its going to be rad!
Belugawrx Posted December 23, 2014 Author Posted December 23, 2014 Mmmmmmm....... Primer..... Duplicolor sandable primer Just to see where more filling and sanding needs doing... and there are alot of spots!! Those tbar ghosts need more attention Hey Jesse I did look at the A pillars but the T/A top didn't have enough meat at the back to lower the front, so.... Thnx Joe, Carl, Randy for looking in Ben You got that right! But ... so far so good
jjsipes Posted December 23, 2014 Posted December 23, 2014 Seeing this makes start tot think about the a 62 TBird with the chopped roof from the 53 Studebaker kit. Hmmm. Looks good.
Belugawrx Posted December 23, 2014 Author Posted December 23, 2014 (edited) Ya I've seen one with a Starliner roof and ,.... One with a '67 Mustang fastback roof which takes in the whole trunk, but the '79 T/A roof was what I had on hand and I wasn't gonna build it, so...... Happy modelling an Merry Xmas Edited December 24, 2014 by Belugawrx
Belugawrx Posted December 26, 2014 Author Posted December 26, 2014 Needed an A/C support,,... made out of a copper battery mount I found in the DETAIL drawer (think it's an old batt.conductor) A hint of the colour,... and some Detail Master glass packs with pencil tip side exits Chassis weathered and ready The engine,...almost complete stuffed in there And the hood closes,.....!!Yaaa Using some Detail Master spinners,...Painted, washed, dullcoted I'm thinkin' I like em Next strip that chrome from the grille and ,....and,..... Thnx for looking Cheers
bill_67 Posted December 27, 2014 Posted December 27, 2014 This builds lookin pretty cool, Bruce. Keeper going.
Belugawrx Posted December 29, 2014 Author Posted December 29, 2014 A little more ... Installed all new window trim and roof transitions... .040" Evergreen 1/2 round Bit more sanding and then back into primer... I picked up an airbrush (Paasche VL-set) some time ago and have decided to really dive into it this week (off) Not liking the rattle can's monstrous amounts of coverage anymore... Cheers
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now