pettiner Posted September 17, 2007 Share Posted September 17, 2007 Quote Link to comment Share on other sites More sharing options...
Tom Kren Posted September 17, 2007 Share Posted September 17, 2007 cool is the kit lowered? it looks like it sits lower then the old issue. Quote Link to comment Share on other sites More sharing options...
Randy Kern Posted September 17, 2007 Share Posted September 17, 2007 I just picked this kit up Saturday, at the Super September Showdown contest in Gilbertsville. It says it has a 'lowered' suspension, and along with the 'Budnik' looking wheels and low profile tires, will sit pretty low. They are one of the nicer sets of bigger diameter wheels and tires in the newer kits. Also included are white walls for this set. The only thing I would have liked better is if they were big-'n-littles. This kit does still have the VERY nice big-'n-little Cragars and tires the earlier version (yellow car on box) had. It also now has a 'modern fuel induction system' on the small block Chevy. They should have just put the Speedwagon motor in it, but oh well. The new decals also have some new graphics, pinstriping, and disc rotor detail. Hey Tom, Lyle was there, too! Quote Link to comment Share on other sites More sharing options...
Tom Kren Posted September 17, 2007 Share Posted September 17, 2007 Thanks now there goes some more of my $$ Quote Link to comment Share on other sites More sharing options...
Mr. Metallic Posted September 18, 2007 Share Posted September 18, 2007 Is it me, or is the grille different? I don't rmemeber the thick bar on top. Glad they added some new parts to this kit, now revell will get some of my money since they made it worth my while. Quote Link to comment Share on other sites More sharing options...
Randy Kern Posted September 19, 2007 Share Posted September 19, 2007 Craig, that's a little airbrush touch-up on the model on top of the box. Not sure why, though, as the grille is the same, and it looks OK on the side box photos . That year has to be one of the best styled Fords for a street rod! Quote Link to comment Share on other sites More sharing options...
Rob Hall Posted September 20, 2007 Share Posted September 20, 2007 Nice to see this one back..I think I saw somewhere that the sedan version was to be reissued also later in the year... I'd love to see Revell tool up a '38 De Luxe version. Quote Link to comment Share on other sites More sharing options...
Joe Handley Posted September 22, 2007 Share Posted September 22, 2007 I've been eyeballing this one at work, then I have to go and get the mop to clean the drool off of the floor in that isle Quote Link to comment Share on other sites More sharing options...
James W Posted November 18, 2007 Share Posted November 18, 2007 Just picked up the new release and there have been some additions Engine: New TPI intake consisting of 5 chrome pieces and unplated fan belt. Suspension: New rear axle center and front spindles. Radiator: New top tank, chrome. Wheels: New large diameter wheels and tires, nice. Disc brakes also. Decals: Feature larger pinstripe images than last time, disc brake details and whitewalls for the new tires. All the old parts are still there, nothing has been deleted, even the old staight axle set-up, so you can build the 'old school' rod with 15 inch wheels and tires and carbed engine or the new version. Quote Link to comment Share on other sites More sharing options...
Dr. Cranky Posted November 18, 2007 Share Posted November 18, 2007 I have a few of these now and I have to say it's a very nice kit. I've build a few and they've turned out pretty nice . . . Thanks for the review. Quote Link to comment Share on other sites More sharing options...
Jairus Posted November 18, 2007 Share Posted November 18, 2007 Hey, your first picture James! Looks great. Was it easy? :-) Quote Link to comment Share on other sites More sharing options...
James W Posted November 18, 2007 Share Posted November 18, 2007 (edited) Hey, your first picture James! Looks great. Was it easy? :-) New DSL explorer installed yesterday. Remember how easy it was to find the picture I wanted to upload on the old system? That is gone now. But compared to changing internet explorers, it was a cake walk. Edited November 18, 2007 by James W Quote Link to comment Share on other sites More sharing options...
Casey Posted September 26, 2013 Share Posted September 26, 2013 If anyone buys the almost-here reissue, I'd love to know if the Cragar S/S wheels are still included. I don't recall them being in the Goodguys reissue, but it'd be nice if they still are present. Quote Link to comment Share on other sites More sharing options...
Skydime Posted September 26, 2013 Share Posted September 26, 2013 If anyone buys the almost-here reissue, I'd love to know if the Cragar S/S wheels are still included. I don't recall them being in the Goodguys reissue, but it'd be nice if they still are present. lrmxs4097.jpg It may have gotten lost in the full description but, Randy stated "This kit does still have the VERY nice big-'n-little Cragars and tires the earlier version (yellow car on box) had." I hope this helps. Quote Link to comment Share on other sites More sharing options...
Jantrix Posted September 26, 2013 Share Posted September 26, 2013 These kits have always been the one of the nicest kits Monogram has ever put out. Being 1/24 is a pain in the butt for kitbashing purposes, but from a box stock perspective, these kits are hard to beat. The running gear, engines and interiors scream 1990's but they sure do build up nice. I've built the sedan and convertible, and I have the coupe waiting in the stash. I'm really going to try to go traditional with it. The Revellogram 1/24 '40 Pick-up should get me pretty close in the chassis and suspension department. The interior is going to be the real trick though. Quote Link to comment Share on other sites More sharing options...
Merc49 Posted September 29, 2013 Share Posted September 29, 2013 Even though it's in 1/25, the Revell 1948 Ford could donate some parts for the interior (like the seat, for instance), in order to go a more "traditional" route. At least that's what I'm going to try. Quote Link to comment Share on other sites More sharing options...
Joe Handley Posted September 29, 2013 Share Posted September 29, 2013 Does the coupe have the Vette IRS and both dropped axle ane Mustang II front ends? I can't remember. Quote Link to comment Share on other sites More sharing options...
Casey Posted October 1, 2013 Share Posted October 1, 2013 Does the coupe have the Vette IRS and both dropped axle ane Mustang II front ends? I can't remember. Yes, it does according to post #9 above. I found another post reviewing the same kit, so they are one now. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.