Belugawrx

Looking good there Mold,... I see Wim at www. bestbalsakits.com has the Blue #20 decals

Welcome Jim See you around the boards

The P/E rads look, well.. Rad ! Nice touch This is really looking good Chris Cheers

Welcome John ! Lot's of tis flying around this place...Have fun !

Perfect for rolling one of your many fine builds in and out of the work area?

Amazing detail work Mark

I need to redo the trumpet screens, ..I know I have been noodling on it for a bit.. Yes Follow the directions as per zip tie locations I replaced 4 gas injectors with brass wire pins,..in afterthought, I would replace them all, at time of cleanup I ended up running the kit :"clear fuel tubing, after soaking in hot water, quite pliable, but.... tried the paint through as orange and white..came out bubbled, then a mix of clear orange and flat white ...never dried,..and still,, the outside was gloss so,,,I installed the clear lines and flowed thinned Tamiya X -24 over them... on final weathering I will coat them with a flat... I can not guarantee the correct line flow under the electrics board

Beautiful build Ludwig ! ??

So, I thought I would start another 1:12 Tamiya F1 kit, while I wait for the new WR1 decals to come in... So, as usual I start with the engine,...This one just kind of fell together... I added the zip ties to the trans cooler, and the battery tie down.. out of beer can metal.. otherwise OOB excet new Indycal decals Also the kit black tubing was shot, so will use smaller, softer dia. hose I would really like to NOT send 4 years on this one.

Good to see this one back Mike.. Can you cut the pins off and build a new manifold 90 * down,..? Keep at it brother... Cheers

Peter is on the Last train to Clarksville RIP Mr. Tork

Oh Yeah ! I can see that doing back flips easy!!

Very nice and Low Cheers

Cool work on that..I like ?

Cool front end

Oh so sweet !.. I had no idea you chopped it... looks awesome

Great result !! Looks just like the real deal

Thanks Bill, Yep that's the place.

http://www.micronmeters.com/c-46-insulated-wire.aspx I ordered 34awg single strand and it looks great

Nice clean build Ludwig ! Just one thing, the bed sides need to brought outside the retaining tab, flush with the cab corners... Cheers

Well Done Im sure your client will be happy

Love seeing this winner... Well done Mark

Chris, Jim, Dave, Thomas, Scott ... Thanks I am not going to call this done... yet. new decals, should be here approx, 3 weeks In the meantime I have started the 312T4, so look for that, coming soon. Cheers

Looks Great !

Nice job on that Rich ! All of the purpose designed barge boards, wing fingers, and wheel scoops are well represented on this one. Well done,...Cheers