MikeMc

Mail slot windows...slammed on the ground......if you want a hot rod

Make them.... and with 18 posts....your just getting started

I've used these stands for a while now and have good luck with coverage. I tend to "jamb" paint with my brush..edges and lips and wheelwells all done first , then fill in the whole. I get a fair amount of overspray buildup on the wires, but as they need adjustment body to body I check for loose or crusty and wipe down with lacquer thinner. Seems to work well for me!

Neither....Carbon fibre for the panel and then blackout the lenses

George... Steve is right..the future trick works. The" ultimate water based super glue" Crafters Pick will work as will epoxy....the trick is a clean joint to repair and tape , string ,or some kind of clamping device(s) to hold until adhesive sets up

OOOOOH YEAHHHHHHH!!!!! love the whole driving style....I rode in this last month....

I'm lost....why not clean them just like your bottles? Lacquer thinner should work great...my trouble is loosing them!!

After a short break......

WINNER!!!!!! and that back end is killer now....just a flash of whitewall

Glad you found out B4 you went out for a ride

SCCA they just keep it going....The june sprints at Elkhart lake and camping at Plymouth Rock....Racing can't get much better!! Then again Friday nite short track and Woo Sprints... Screw F1 and Nascar They will both crash unless they PRICE themselves back onto planet earth!!

Well that does suck

Then I have to ask you Harry,are you ROM? and vote often I guess Harry and Clay are still snoozin, Top of the mornin George!

check this one .....The springs are under the axle...rods on top......

Gotta agree with Bill and Donn....Get a good booth(paasche, model expo ,Micro Mark) and a good brush...and yes rattle cans work in the booth...just more waste!!

Just remember hurricane season started 6/1/09.... They don't suck...they BLOW!!

S*** DOES NOT "HAPPEN" its made by A**HOLES !!

Yep it is sweet.....BUT I liked this one more

White Pearl....

And the '66 galaxie...The SOHC fits the 56 f100 like a glove..... I put the 427 in the f100....and stuffed a Boss 429 in the Galaxie!!

Yummy!!! I agree with Dave & Mike about droppin that tail...and CB with the wrinkly windows

Don't forget the 392 Hemi in the 41 willys street rod kit!

beerfday HUH??????

And rather than glueing...dip it in future, drop it onto the premounted pin and wick away excess future. A bit of tape until dry...

try cold....Put the tire in the freezer first.....work quickly as it gets wet as it warms up!