Jump to content
Model Cars Magazine Forum

MarcelT4

Members
 View Profile  See their activity

  • Posts

    231

  • Joined

  • Last visited

 Content Type 

Everything posted by MarcelT4

  1. MarcelT4
    Hello, Today both Minis in a double pack. Unfortunately both don't come across so nice in artificial light.
  2. MarcelT4
    Thank you all.
  3. MarcelT4
    You had to wait a long time, but now it could finally go on with the BMW Mini. In Germany, the longed-for honeycomb grid is now available as etched parts. But see for yourself.
  4. MarcelT4
    Today I finished the suspensions and put on the wheels. Also the interior is almost finished. Here are some pictures.
  5. MarcelT4
    Hello, After I got fed up with the printer, I worked on the Mustang. First, I took the underbody and attached the suspensions. Since the cardan shaft was now too short, the ends were simply separated and glued to a piece of Casting again. I also finished the interior and primed. Then the first color applied to the interior. After the taillights had bathed almost 72 hours in Dowanol, these were finally freed from the paint and could be properly colored using Tamiya Clear Red. And now a taste of the color. And of course the wheels too. Now I'm curious about opinions.
  6. MarcelT4
    Thanks all. Now a very short update. After the 3D printer left, I now had to use the printed parts I had. But first I finished the engine so far and pulled a strap on it. Then I used the front suspension. Now I'll have to decide if I fix the old printer or get myself a Creality Ender.
  7. MarcelT4
    Now continue. Have the engine a try in the room named after him. And once the complete Airride printed and painted. So far from me, now you again.
  8. MarcelT4
    Well mild custom he gets in the body, but more of a wild custom.
  9. MarcelT4
    Now it's time again. I modernized the interior. Then something printed and tinkered for the rear suspension. The strut is for illustrative purposes only. Also for the front something was printed. And the wheels.
  10. MarcelT4
    Hello, I have extended the intake a bit and brought a little more color for the engine in the game. Now I have to somehow integrate the Supercharger into the drive. I just do not know how. I also created an air filter, printed and provided with color.
  11. MarcelT4
    Thanks, Koellefornia Kid. So, now under construction. I had to redone the intake because today a SC came from Shapeways. Yesterday I had already given some color to my self-printed. The front suspensions are also changed, so the chassis had to be changed as well. And due to the Radhausverbreiterung inside, of course, the interior no longer fit. What the heck, he is just a 2-seater. And last but not least, a sports air filter.
  12. MarcelT4
    Servus, I've used the last 2 days, and the Supercharger newly created on the PC and printed. Now it's the right thing Whipple Supercharger does in real life. The air duct from the front and the drive on the side over. Here the original. (Picture is unfortunately from a Camaro) And here on the left my created part (I have the Intake built in the same time). The right one is the first prototype. I hope you like it
  13. MarcelT4
    No, the engine comes from a Revell kit from the 2014 mustang gt.
  14. MarcelT4
    I habe found one. https://www.shapeways.com/product/W8NWUFLSJ/whipple-blower-1-24-only?optionId=63677496
  15. MarcelT4
    Unfortunately, I have nowhere found a supercharger, so I created and printed it for myself.
  16. MarcelT4
    Today I created and printed a prototype of the supercharger.
  17. MarcelT4
    Hello Curt and welcome. Amy question: Is there actually a whipple supercharger for the engine of the 2014 Mustang GT?
  18. MarcelT4
    Hello, I start a new BB. The conversion is already in full swing. This Mustang will come along with the 5.0L engine of the 2014 Mustang GT and many other modifications. I started with the modification of the rear panel to mount other taillights. The part is from an Overtuned Maisto Mustang. Then I started to modify the engine compartment. Here I removed the battery, straightened everything with a sheet and filled with (my) version of GAP. It has also begun to make room for wider wheels. Then I have ever engine parts wrapped in color. And the engine itself too.
  19. MarcelT4

    VW T1

    MarcelT4 posted a topic in Model Cars

    Hello, While I did not get any further on the BMW Mini, I tried a metal model. I saw this at a flea market and could not resist. However, the paint was battered and I did not like the color too much. It was so mint / light green and above white. I have stripped it completely and painted it in Candy Flame Red, as well as on the top in white and with a Revell varnish, which has a metallic effect. Should probably be intended for the Airbus. But now the pictures. I also completely cut out the loading area and made it real again using real wood (chopsticks from the big M). And the bumpers were chrome-plated by means of Molotov, before were white.
  20. MarcelT4
    Hello, I donated the Mini a facelift and installed the new headlights. Still without glass. And the wheel / tire combination is now also.
  21. MarcelT4
    Now back to the BMW Mini. The paint is on it and the rivets were used.
  22. MarcelT4
    Thank you very much. I think that's the mini for America.
  23. MarcelT4
    Thanks, Dann. Now, I finished the MK1. Outdoor pics comes.
  24. MarcelT4
    Thanks. But, it is not the same color as the MK1.
  25. MarcelT4
    Now, more paintwork on the roof at the BMW Mini. Now you can see a little taste of the color.
×
×
  • Create New...