dino246gt

Nice builds and interesting solutions to "problems" encountered along the way. We all run into problems but we push ahead and make adjustments, big and small. Thanks for sharing your fun builds, I sure enjoyed it and learned a few new tips and tricks.

Man this is a fun thread for me and others to follow! I love building those old kits and making them better. What you're teaching us applies to all older kits, so.......... Thank you for making such easy to follow lessons on how-to-have-fun building a less-than-stellar kit!

Ha ha, Jim, but for my NEXT project, AMT '50 Ford convert, also a period mild custom, I DID make some blue dots! Sanded the ribs down, glued some photo-etch small circles on and filled them with clear blue, cheers!

I just crinkled some foil then painted it with basic heat stain colours. (this pic is before heat stain) It's not perfect by any means but better than 2 pieces of plastic molded in silver/grey glued together! Loving your Pagani build here, very cool!

I see that here too, thought it was my computer, but I agree that this is a FABULOUS build and anyone building a similar kit would want to use this for reference, so PLEASE edit it so that the pictures properly align with the very interesting text! Beautiful build with excellent detailing!

Over the primer before the next layer of putty because the primer interacts with the putty. Clear, or any colour I suppose, I use clear mostly, creates a barrier. It works for me, maybe it's not the right thing to do, but it has saved me from doing putty, primer, putty, primer, over and over again.

What I found using Tamiya putty, (lacquer based) then either Tamiya or Dupli-color primer, (also lacquer based) is that they interact with each other and will pretty much never work out. Spraying actual PAINT (still lacquer) will create a barrier, primer over putty is a never ending problem, and I LOVE doing major mods that require several do-overs. So putty, sand, prime, paint, then sand, putty, prime, and paint again. (I use up spray cans that I won't every use on a car for the barrier as long as they're lacquer based) Once I'm happy, I'll prime the whole body to be uniform in coverage for the actual paint I want the car to be. The BEST solution is not to use putty for major filling, but as NOBLING suggests, use styrene bits instead of putty, it can be done and melted with Tamiya extra thin cement. I salute all of you who do major styrene surgery, cheers!

No gloss, no clear, chrome brushed right over putty and sanded styrene.

Since I removed the bumper guards and bolts, I had 3 pieces of bumper, but I glued them onto the car, then sanded, puttied, and sanded THEN brushed the FusionFirm on, bumper and grille, no clear. This is how they look!

GLUE BOMB: Here's one I got to take apart and rebuild, built when it was new by someone who, as most of us did, used way too much glue!

Looks like a great project, I'll be watching, sitting on my "padded" seat!

It sure looks cool in your mock-up though!

It's a great kit! Most of this pan is one piece, a bit of detail paint goes a long way to make it look more complicated than it actually is. LOVE the colour you've done, I did mine in black.

Looks cool, does this kit have a separate hood? And engine??

IF you really want to chop that top, I'd consider, since you're going through all the trouble, or should I say fun, of cutting it off anyway, using a HARDTOP from a Revell '55, as I did or a '57. Here's the one I did with the Revell '55 roof, NOT chopped. I just think for your build a chopped top would look better on a hardtop. This side profile shows how high the stock hardtop roof is, you could chop it on your cool custom! I cut mine off keeping the cowl and part of the trunk lid, making it easier to blend into the body with the seam where it's simple to putty and sand. Here's the '55 hardtop section fitted to the '56 body, since you'd be chopping yours, it might be the same amount of fun as chopping the kit's sedan roof.

I like the idea of cameras for mirrors. Here's how they look inside, although this is a central driver, simple little screens, easy to scratch build for the cameras. And here's how they look outside, also simple to scratch build. I love what you're doing to the Atlantic!

Any news on when we can buy Tamiya spray paint again in CANADA?

Tamiya, CANADA

Beautiful GTO!

Very creative and nicely built.

Man that looks so good, and gluing the doors shut worked out for you, I did that on my '56 kit. Cheers!

Nicely done! I was actually on the assembly line at the Wayne plant in 1969!

Nicely done! Yeah some of those "primitive" kits are actually pretty nice as you've proven here!

Beautiful build, clean work and great colour choices, very nicely done!

Beautiful! I love it!!