RickRollerLT1

Finished in October 2021. Built from Revell Monogram SVT Mustang Cobra kit. Customized a bit to look like a 2004 Mach 1. Added shaker hood scoop from a Revell '70 Torino Cobra, front chin spoiler from a AMT Ford Probe rear spoiler, and rear spoiler from a Revell Saleen Mustang Speedster. RB26DETT swap came from a Tamiya Skyline R32 Nismo, with the SVT Cobra's exhaust modified to hook up with the RB's header. Wheels and tires are the custom pieces from a Revell Subraru Impreza WRX. Exterior is Tamiya TS-97 Pearl Yellow cleared with Pledge.

Finished in October 2021. Built from Tamiya Skyline Nismo kit. Only modifications were a 1999 SVT cobra 4.6 DOHC V8 swap with custom built twin turbo and manifold, and side exhaust exiting from the side skirts. Exterior is Color Place Fire Red with the Hood Rustoluem Metallic Grey to simulate Carbon Fiber. All cleared with Pledge.

Finished in October 2021. Built from this rare issue of AMT's F&F Supra with the stock spoiler Only changes were switching out the exhaust tip and swapping those fugly a$$ wheels with a combo from the Revell/Monogram '37 Goodguys Ford coupe. Exterior is Tamiya TS-52 Candy Lime Green cleared with Pledge.

Finished in October 2021. Built from recent Round 2 reissue of the Bomex/F&F AMT Toyota Supra. Following modifications had been made: Removed rear Gas tank Custom built side exhaust Filled in targa top, rear bumper exhaust outlet, and trunk area holes made for speakers Added hood scoop from 1998 Pontiac Trans Am hood on to the Supra's hood Duck tail spoiler made from Revell VW New Beatle custom wing 5.4 V8 donated from a SVT Cobra Mustang, with twin supercharger setup adapted from a Revell Pro-Street C4 Corvette Wheels+tires are from the Revell 2018 Ford GT Le Mans racer Exterior is Tamiya TS-92 Metallic Orange cleared with Pledge.

Finished back in June. Started as two dirt cheap Street Fever Vette gluebombs. Kit #1 had most everything on sprues but with a badly mangled, heavily glued body, kit #2 with a mint body and glass but the chassis/interior/motor stuff having 40 gallons worth of glue. Obviously, the body from #2 was used with the chassis/frame/chrome/glass from #1. Kit #1 was missing the F/R suspension stuff & motor, while #2's elements were so badly melted and welded with glue on the frame they were unsalvageable. Both were missing small other things which were substituted with elements from the spares bin. Things like the hood, roof, and front glass were so atrociously fitting that they were tended to the best possible without breaking what is otherwise a hard kit to come by. Front & rear suspensions and motor were lifted from a MPC/AMT C4 Corvette. The 350 SBC also has a custom fuel injected twin turbo setup, and things like exhaust/brakes/radiator stuff came from the spares bin. Wheels are from a C6. Exterior is Testors Clear Candy Green over Rustoluem Silver, cleared with Pledge.

Finished in June. Revell kit #85-2371 with the only changes being Foose wheels, hood scoop from a MPC Vega Pro-Street, and a fuel injected intake setup. Exterior is Tamiya TS-92 Metallic Orange cleared with Pledge.

Built in September 2020 from a gluebomb resto of a 1992 era Revell Snap-Tit kit. Had an extra motor from a mint kit and the front bay of the gluebomb had tons of extra space, so I figured "what the hell, why not TWO V6 motors". THAT'S never been done before! Other than cutting open the front hoot and a bit of room in the bay for the V6 up front and to add drive shafts, not a ton of other mods were done. Just some custom wheels from a Revell '09 Challenger, air filters, and exhaust pieces/tips from the spares bin. Exterior is Tamiya TS-52 Candy Lime Green cleared with Pledge. Apologies for the graininess of the last two pics, hard to get a good view of the bays.

Finished back in April. Built from a Revell Ford Focus that had donated it's motor and rear suspension to a different project. For something different, this project went down the mid-engine rabbit route a since such a feet has never been attempted before, and certainly not with a 5.4 V8 behind the drivers seat! The body and interior are the kit's pieces but extensive mods take place underneath. The front half was mostly the kit's remaining suspension with an air dam, custom radiator, and spare tire. Back half was where extensive modifications took place. Several parts from the spares bin, a C6 Corvette, Ferarri Enzo, and a Jaguar XJ220 were used for crafting things like rear engine bay, exhaust, driveshafts, suspension, brakes, rear glass, etc. Sheet styrene was used to create some areas of the engine bay. A battered Revell 2010 Shelby GT500 Wheels donated it's Supercharged 5.4 V8 with the transaxle coming from a AMT Jaguar XJ220. Wheels are from the Monogram Lotus Esprit Sport 300. Side vents are from a AMT '67 Shelby GT500. Exterior is Tamiya TS-52 Candy Lime Green cleared with Pledge.

Finished back in March. Built from the Round 2 reissue of an old, ugly, almost forgotten modification of MPC's 66-70 Oldsmobile Toronado tool. Obviously, extensive modifications and exclusions of certain (goofy IMHO) body features to make this acid trip, mishmash custom more in line with Jay Leno's 66 Olds. Obviously, the 1960s MPC bare promo style chassis wasn't going to cut it and there were plans for 4WD to go with the planned twin turbo LS7. A Revell 1990 Ford Thunderbird frame was found to be a far better fit under the Olds body/interior tub and allow for a 4WD setup. Some modifications and extensions up were made to the front of the frame and the kit's engine bay was also discovered to be a snug fit with minimal trimming. A junk Z06 donated it's motor with several mods and a custom twin turbo setup using the Olds Transmission linked to a Corvette diff in the rear. Center of the interior tub was modified to allow for a torque tube going from the Olds trans to the Corvette rear differential. Several parts from the spares bin were used for things like exhaust, driveshafts, suspension, brakes, radiator, etc. Wheels are Pegasus Hobbies 2309 23 LUXOR S. Exterior is Tamiya TS-73 Clear Orange under Rustoluem Metallic Aluminum cleared with Pledge.

Tower Hobbies shows a September release for the long awaited MPC Celica repop https://www.towerhobbies.com/product/125-1983-toyota-celica-supra/MPC891.html Day one for these! Time those Evilbay scalpers on the originals get ######!

Here's the thing with Tamiya spray cans and Super Clean/Purple Power: If you use their Grey/White primer underneath the SC/PP will not make it budge, especially so when using Tamiya base coats on top. Even if you use other brands enamels or acrylics on top of a Tamiya primer base, it will take the former two off with ease but not even touch the primer. The same goes for the Duplicolor sprays. I hear the best methods in these instances would be 91% rubbing alcohol, Easy Off, ELO, or a combination of the three. However, if you have cheap Enamel Lacquer bases underneath Tamiya sprays, the PP easily attacks the former and also causes the unaffected Tamiya layer to slide off with it in sheets. An example is a body I painted with True Value Grey Enamel/Lacquer primer, followed by cheap Home Depot Flat Black, Rustoluem Silver, and then a Tamiya Metallic color over that like Blue/Green/Red/Orange. For faster results, scrape or scuff the paint to show the bare plastic or primer coat. Another fun fact: the Testors One Coat Lacquers are actually Enamel Lacquers like the Rustoluem lines. Those from past experience come off real easy with the Purple Pond.

Built from the recent Round 2 reissue of a crica 2003 AMT kit (originally in the Fast and Furious line). Built mostly OOB with the exception of reworking the kit's blob motor to look semi decent. Unlike the Supra, this one had major problems with bad fitment, warpage, and a "motor" looked to have been blueprinted by someone who never saw an engine before. It had a 4 cyl NA header on the back and some weird looking thing with a turbo up front. A custom front header was added while reusing the kit's turbo and doing a whole new plumbing/piping setup. Interior is Tamiya TS-53 Deep Metalic Blue, and the exterior is Tamiya TS-52 Candy Lime Green cleared with Pledge.

Built from the recent Round 2 reissue of a crica 2003 AMT kit (originally in the Fast and Furious line). Built 98% OOB with the exception of an added aluminum exhaust tip from a Revell import kit of unknown origin (the AMT's exhaust tip was short shoted). Leftover decals from the recently reissues AMT 1995 Mitsubshi Eclipse were used to mimic the graphics scheme of the F&F car. Exterior and interior is Tamiya TS-97 Pearl Yellow lightly misted over Rustoluem Orange to replicate the Pearl Orange of the F&F car. All of this is cleared with Pledge.

MoparFans, geeeet out whillee youuuu stiiillllll caaaannnnnnnnnnn!!!! 15yr old gluebomb resurrection with tons of replacement parts and a major drivetrain swap. Rear spolier was lifted from a '70 Mustang Boss, and suspension was lifted from a parts Revell '69 Charger. The kit's exhaust was rebuilt using sprue and modified tailpipes from a AMT Silhouette. Grille covers are pieces from the MPC '69 Charger slightly trimmed to fit around the '71 grille. Engine is a Toyota 5M-GE I6 from a heavily gluebombed parts MPC '83 Celica Supra. Modifications are a custom supercharger setup and a resin big turbo with custom plumbing and a parts box raditator. Wheels are from a Revell 2010 Shelby GT500, with front tires from a AMT '95 Supra and rears from the custom wheels belonging to a Motor City Muscle '70 Mustang. Interior is Rustoluem Flat Dark Brown, and exterior is TS-73 Clear Orange over Rustoluem Silver, all cleared with Pledge.

Yes, another GTX from the recent Dom's Fast and Furious GTX kit. 440 was swapped out with a Tamiya Nissan 300ZX V6, featuring a heavily modified Ford GT Supercharger and Twin Turbocharged setup with resin turbos. Custom intercooler setup made from plastic sprue and a parts box radiator. Wheels and tires are the custom units from the Revell '70 Cuda with disc brakes from a 99 Mustang Cobra. Blasphemous to Mopar fans, yes. Unique and uncommon, you bet! Exterior is Tamiya TS-97 Pearl Yellow over Rustoluem Yellow, all cleared with Pledge.

Built from this 2001 issue of the AMT '71 Charger: Had the shaker hood and Hemi parts which AFAIK aren't on any later issues of this kit. One thing you'll notice is those wheels and fugly ride height, which were remedied to in this build. Mostly OOB with the exception of using wheels, tires, and brakes from the Revell Dom's Fast and Furious '71 GTX kit. Interior is Rustoluem Flat Dark Brown, and exterior is Tamiya TS-52 Candy Lime Green cleared with Pledge.

Built from the recent Dom's Fast and Furious GTX kit. Mostly OOB using the kit's custom wheels+suspension. Only modifications were swapping out the Road Runner hood with a GTX grabber hood, and using a 426 Hemi from a Monogrma '71 Cuda with the air cleaner and intake from the GTX's 440. Interior is Rustoluem Flat Mocha, and exterior is Tamiya TS-53 Deep Metalic Blue cleared with Pledge.

One i'd like to see back out is the MPC 83 Supra Celica. That one hasn't been reissued since the last 1984 boxing, and i'm sure they have it in the pipeline for 2021 since the '95 Supra just got reissued.

On some older white molded kits kits I bought sealed in the past, they would be severely yellowed or almost entirely tan. What's even weirder is I've gotten opened kits with parts out of their baggies (and some complete/started kits in ziploc baggies) that were still pure white inside. I heard this phenomenon primarily occurs with certain styrene/ABS materials that were left outside or in warm temperatures out of their packaging, but then I've seen it in sealed stuff too. Google-fu can't get me a real clear answer due to all the variables and factors, but just curious on your experiences and opinions.

Newest stock the two HLs in LI have are the Revellogram '76 Chevy pickup, '70 Firebird 2-in-1, Dom's ' 71 GTX, '60 Chevy Truck w/Go Cart, reboxed ROG Range Rover, Supernatural '67 Chevy Impala 4-door, '64 Plymouth Belvedere, and believe it or not the '71 Duster (odd HL would stock that one again at full price nonetheless when the two stores cleared them out at $5 a clip about a year ago). Wake me when they have the AMT Mitsubishi Eclipse, Toyota Supra, Nissan 350z, and the Revellogram Chevy S-10 in stock. I was lucky enough to find two LHS's that had the Eclipse and Supra as every retailer online were sold out. HL had the Supernatural Impy and Dom's 71 GTX shortly after they came out before any LHS did (it's usually the opposite). No LHS has the 350z or the S-10, though I wouldn't be surprised if they showed up at HL first again before the LHS's get them.

Had that happen to me on a old SnapTite AMT F-150 (molded in Blue or Green?) once. Snapped the interior tub under the body and the whole body snapped in two like a jigsaw act.

I wouldn't be surprised if those AMT kits made under the 2004-2007 Tomy/RC2 helm were largely based on die cast toolings used for Ertl/Johnny Lightning 1/18th and 1/24th equivalents.

The MPC 71-73 Mustangs aren't very good due to all being based on a 1960s era Mustang promo turned kit update. The AMT 73 (last issued in a flat box as a racer about 5 years ago) is a much better kit. The 350z dates back to the Toyko Drift tooling and has odd proportions, especially the low chop top like roof. It can be made into a nice custom if one swaps out janky wheels with something else and thinks outside the box with a possible motor swap (LS1, Coyote moto, endless possibilities). The decals in the TD issue were jaw-droppingly awful as they would shrivel and wrinkle up into nothing, so any new decals R2 does as they did the Supra (which also had equally lousy decals in it's initial F&F issues) will be an improvement.

Well then, sign me up for at least 6 of the Supras!! Be nice if we had dates, but I imagine by late summer or so. Wonder if it will be the first version with the Bomex body kit, or the Veilside body that was co-designed by Aoshima for their JP boxing. One of the better kits out of the F&F line considering it's shortcomings, and it's a goldmine for parts motor suspension and seats. Only a matter of time till R2 decides to reissue this MPC 80s Celica Supra to go with it https://www.scalemates.com/kits/mpc-1-0841-toyota-celica-supra--950596 The 350z is a decent kit, wheels/tires are jaw droppingly awful and the roof looks kinda chopped. Be nice to have that one out too, and no more dealing with evil bay prices for these!

Built from Fast and Furious Dom's Charger kit. Kit's parts like the motor+ blower and wheels/tires were raided for other projects, but as I had most of the essential parts present I was customizing anyway. Mods as followed: Hood scoop from Revell '68 Charger drag option placed on '70 hood. 7.0 litre Dodge Viper motor from scrap Revell Viper ACR build, with a custom made vortech style super charger setup using a resin turbo, exhaust and sprue pieces. Styrene scrap trees bent as intake tubes and oil filters turned into air filters as the original pieces were missing. Electronic fan/radiator comes from an unknown source. Custom built side exhaust. Seats from Dodge Viper ACR. Wheels are Radio Shack X-mods, with front tires sourced from an AMT Fast and Furious Supra and rear tires from Revell C5 Corvette. Disc brakes were also sourced from the Viper ACR. Various decals were used from the 68 charger, and the red tail stripe is from the stock '70 Charger. Exterior is Walmart Color Place Gloss Black, cleared with Pledge.