Bugatti Fan

I think that, fair to say that the scalemotorcars site is gone. I used it in tandem with this site as there were many scratch builds in larger scales that were a feature of that site. There was a Swiss guy on there making a scratch built Lincoln Continenta! (I think) in 1/12th scale who replicated all the actual pressed panels on the car using tools he designed for the job. Fascinating build to follow. It would have been nice if a number of their contributors had migrated to this site.

Depends on where you got the Revell email address from ? Suggest you look at Revell's own website, either the USA site of their German site, whichever one you are trying to contact to check if the email address you are sending to is current and correct. Alternatively. Have you double checked your own email address sent to them to make sure that there are no typo errors in it that would cause a rejection ?I Cannot think of anything else it might be. HTH.

As Star Trek's Spock would say. 'Fascinating!'

It's been quite a journey so far, and really interesting looking at the progress on this model. The subject is amazing to see coming together. Once the Hydra is finished, will you be going back to that knocked about built up Pocher Rolls that you bought some time ago? It will be interesting to see what you do to it. I guess a complete strip down, overhaul, perhaps conversion and super detailing job will be in order?

I was looking out T35 model builds on a web search and it threw this one up. Had a good look at it when it was current on the forum but going through the posts cannot understand why at the time I failed to join the conversation (don't ask why) as I would have normally responded given the subject matter. So firstly my apology for my tardiness in not responding at the time. Having said that your T35 model is an excellent build of that classic racer. Not far off starting my kit bought well over a year ago so looking at various builds by experienced modeller like yourself. The panel fasteners make a good touch as the wires between them are quite a feature on the real car. I believe that Nick at Unobtainium is looking to do a detailing up set for this kit once he has got all his big Airfix Bentley upgrade stuff into production.

Sounds like a good contact adhesive. Will keep in mind as my current type is nearly exhausted. Heard that Gorilla Brand products good. Any recommendations about their other adhesives?

Nice model of this TV movie icon. The A team. Who could forget that series? Hannibal Smith, B A Barracus, Face and Mad Murdoch. They could never shoot anyone in a close quarter gunfight but could shoot out a tyre at 300 yards !

Thanks for the feedback Rob. Many of us can learn from your answer.

Rob Most mobile phone users are just that. Users. You obviously have a lot of expertise in software engineering that the vast majority of us do not. So may I ask, how have you taken steps to stop your phone from getting hacked it stolen?

Couldn't agree more Pete. Mobile phones are taking over people's minds. Just look at how many people you see walking gazing into their phones as though it is some sort of drug they are hooked on. Worse still the idiots who use them whilst at the wheel of a car. It's one thing walking into a lamp post, but driving 2 tons of lethal machinery looking into one can be devastating and not only for the driver but possibly wiping out an innocent family in another car. One of the saddest things I saw was when I went to my grandkids school sports days. Over 90 percent of the parents attending spent more time looking at their phones instead of enjoying the event.

It never surprises me when I see so many people using their phone to pay for stuff. Apart from the SIM card swap scam, the number of mobile phones that get snatched with all their owner's bank information on them from users hands by organised gangs is getting worse. My bank information is something I would never load onto my phone. Having the phone nicked is just an inconvenience, but having your accounts plundered by sophisticated hackers is another thing altogether, plus the banks will not make it easy to get your accounts sorted out !

I know of them but never seen one living in the UK. The USAF Thunderbirds formation team used them at one time I believe. Nice looking aeroplane !

I'm afraid that having a number of part built models would really get to me, so I concentrate on one build at a time until finished. But each to their own. Nothing wrong with being a butterfly modeller flitting from one project to another. Everyone's attention span, boredom threshold, call it what you wi!l, is different. As long as building models is enjoyed in different ways, it matters not one iota . I can easily understand how projects get put on hold when the distraction of that super new, must have kit suddenly takes precedent or another subject catches your eye.

Interesting project to follow.

Fun model build. I used to own a bog standard Fiat 500 back in the 70's. Did many miles in it and very cheap to run, and parking it where many could not ! The rust got to it in the end. Fiats used to rot like a vampire doused in holy water back in those days! So full credit to those who have fully restored examples today.

Cranky for example is one of those larger than life characters, and I just got curious as I had not heard anything about him in a long time, so I did a search to find out that he had not been on the forum for ages. He might still be a 'lurker' on here without logging in. Who knows ?

Sorry guys, my mistake. The PCB drills do have 3.2mms ( 1/8th inch ) shanks as pointed out quite rightly in subsequent posts. Not 1/4 inch. Should have known better as I have loads of them from when I worked in PCB board manufacture using a dedicated CNC drilling machine back in the 80's. One bit would drill thousands of holes before needing to be sharpened. In the trade they were not throw away items once they lost their edge. Only after a number of re sharpenings did they get disposed of. Very small diameter PCB bits are difficult to use by hsnd. Some peop!e get the knack and have very steady hands whilst others do not and suffer more breakages. I will be sticking to my good quality HSS bits as I can use them in a pin vice. I tend to use a very limited range of certain diameters over and over again in my model making so don't buy sets where most of the bits will never get used. I have corrected my original post to reflect the correct dimension of the shank.

Pay cheap and you get shoddy. You can get good quality HSS drill bits from engineers suppliers who don't sell rubbish drill bits as they are supplying to the trade. Dormer for one is a good make but not cheap, and of course there are other good makes available. BUT, quality drill bits will last for ages when used on most model makers materials. wood, aluminium, white metal. zamac and brass that are all a lot softer than steel to drill. The PCB drills made from tungsten carbide generally have 3.2mm ( 1/8inch) shanks ) so using in a bench drilling machine is generally OK if drilling into a flat surface only.

Those PCB board drill bits were not designed for model making ! They are brittle because they are made from tungsten carbide, one of the hardest metals available. They were designed to be used in PCB board drilling machines for purely vertical motion. Trying to use them by hand will end up with breakages with the slightest side pressure applied. Selling them as modelling drill bits therefore is questionable.

Some school kids were interviewed recently about what they wanted to do for a living after leaving school/college. One claimed they were going to become a gamer. Another said they aspired to be an influencer. Both headed for a reality check soon I guess !

I read somewhere (don't ask where) that the Heller kit captures the E Type coupe body shape better than others. Has anyone actually done any comparisons of the kits? Curious to know if anyone has.

I think that using a torch would need a bit of practice first before being let loose on a kit. There are many different sized torches normally charged using butane lighter fuel. Some are pen sized for fine work. Another popular compact sized torch iis the type often seen being used by chefs on cookery programmes. Plenty about from different sources, but check out the prices as there can be quite large price differences for what is essentially the same thing depending on who by and how they are marketed.

That clamp is a jewellery makers tool, and it made me think that jeweller's suppliers might carry various thicknesses of brass and aluminium rod. Have a look at Maddisons of Durham, UK. They have all their tools and materials on their website. Also have a look at the following suppliers of model making tools and materials in the UK. Shesto. Squires. Proops. Albion Alloys has already been mentioned. There are two other companies with very similar sounding names in the UK who supply large ranges of kits, model making and craft tools, materials and accessories. Hobbies and Hobbys Hope this further information helps.

In the UK we now have too many universities offering too many 'Mickey Mouse' degrees that are no use to anyone ! Many of the old skills based Polytechnics and Technical Colleges became universities and gradually slid into the same old pattern. Back when the government was pushing 'Education,education, education' and kids began to believe in the latter that a degree was the be all and end all. Millions were pumped into state high schools to become specialist schools. How many took up Engineering as a specialism? Just 6 ! Unbelievable ! Science and IT fared a bit better, but do you know what? The vast majority of schools elected to go for Arts or. Drama to get easy money. I mean, how many actors and artists does the UK need ? Kids were not encouraged to take up jobs where they might get their hands dirty like trade apprenticeships and goodness knows we really do need those skills today! Unfortunately loads of kids were sold a pup when it comes to university courses and many have ended up with useless 'fluffy' degrees and have to take jobs where all they need experience in is how to ask ' Would you like fries with that?'

All the gear and no idea! How true does that ring? Tyros with tools. Plenty of those around. Actual skilled tradespeople. A dying breed !