Casey Posted February 17, 2018 Share Posted February 17, 2018 (edited) What do you think would make for a good selling, stand-alone Parts Pack from AMT? It should consist of newly created parts or a recreation of original parts which are long gone (like the forthcoming '57 Fantasy Parts Pack), but remember to keep it realistic-- it's got to be a small package and sell for $13-$15 or so. I propose: 1) 1/25 scale snowplow from (or similar to) the old MPC Jeep Commando, maybe add an amber rotating beacon style(?) roof light or two with transparent amber domes? 2) The Yard Tractor Parts Pack: Wheel Horse tractor found in the MPC Indy Turbine kit(s). If just one is included, the MSRP would/should be less: 3) Vintage Drag Strip Parts Pack: Mini bike from one of the MPC or AMT kits (maybe the forthcoming '86 El Camino?) and a few oil cans, two toolboxes, a floor jack, wheel chocks, or instead a starting line 'Christmas tree' like the one from the MPC '72 GTO, but all-new, with transparent bulbs/lenses in red, amber, and green? Maybe a decal sheet of vintage sponsor logos and vintage style class numbers and letters? 4) Vintage Service Truck Parts Pack: Two 55-gallon drums, push broom (both similar to those found in the AMT Ford C-600 Stakebed kit, but not necssisarily direct copies), a few oil cans, two toolboxes, a floor jack, wheel chocks, etc.-- things they could add to add extra value just about any pickup truck or van reissue. 5) Day 2 Wheel & Tire Parts Pack: One set of deep dish 5-slot wheels and some 60-series pad printed RWL BF Goodrich tires. Really, they could do multiple different sets of wheels using the same tires, and label it multiple ways. I think the newer pad printed Polyglas GT tires are great, and Round2 has certainly gotten a good return on that investment, but aftermarket wheels and tires for street vehicles, as a stand alone set, have been much overlooked, and Round2 has a ton of musclecar, pickup, and van kits in which they could include such a wheel and tire set as a bonus item. I realize this might be a tricky one, as they'd need to make sure the wheels and tires both fit and mount properly to whichever kit they are included with, but a few different wheel back pieces might be able to cover many of the variations. That's all I've got. Let's hear your suggestions/ideas, please. Edited February 17, 2018 by Casey Quote Link to comment Share on other sites More sharing options...
D. Battista Posted February 17, 2018 Share Posted February 17, 2018 "50's and "60's police lightbars and accessories would be good... Quote Link to comment Share on other sites More sharing options...
Can-Con Posted February 17, 2018 Share Posted February 17, 2018 How about the large size wheels and tires that AMT put in thier "Resto Rods" serise. They're already all on separate trees as they were just added to the original kits. I know some people don't like the tires that came with these wheels but I think they look OK, better than a lot of kit tires I've seen anyway. The ones in the Cougar and Chevelle were kinda ugly but the others looked good. Quote Link to comment Share on other sites More sharing options...
426 pack Posted February 17, 2018 Share Posted February 17, 2018 I would buy lots of the lawnmowers What about a pack with just superchargers, headers, custom valve covers and other performance parts. Quote Link to comment Share on other sites More sharing options...
Greg Myers Posted February 17, 2018 Share Posted February 17, 2018 Great idea,but what engine would they be specific to ? Quote Link to comment Share on other sites More sharing options...
Greg Myers Posted February 17, 2018 Share Posted February 17, 2018 (edited) Maybe some more detailed engine kits with internal parts ,Crankshaft, pistons and rods, camshaft, etc. Kinda like the old Aurora 427 Ford. also ready to go AMT Round2 AMT 1/25 1966 CHEVY NOVA PRO STREET ENGINE STAND AND DISPLAY ENGINE! Have one to sell? Sell now Have one to sell? Sell now AMT 1/25 1966 CHEVY NOVA PRO STREET ENGINE STAND AND DISPLAY ENGINE! Edited February 17, 2018 by Greg Myers Quote Link to comment Share on other sites More sharing options...
Greg Myers Posted February 17, 2018 Share Posted February 17, 2018 Ladder Bars, gasser stuff, front end up in the air parts. Quote Link to comment Share on other sites More sharing options...
unclescott58 Posted February 17, 2018 Share Posted February 17, 2018 I'd like to see more of MPC kits come back that all accessories already in them. Like the Commando above. Or the '69 Bonneville hardtop with the canoe and roof rack. The '69 Grand Prix with skis, ski racks, and snow tires. The '68 Dodge Coronet with the U-Haul style trailer. And many others. That was always one of the fun things with several MPC kits in the 60's. The extras. Quote Link to comment Share on other sites More sharing options...
Greg Myers Posted February 17, 2018 Share Posted February 17, 2018 Just Carburetors, Carter AFB, Holley, Predator, Webers, Rochester 2bbls (for old school multi carb set ups), Strombergs (several for multi carb set ups too) Quote Link to comment Share on other sites More sharing options...
426 pack Posted February 17, 2018 Share Posted February 17, 2018 17 minutes ago, Greg Myers said: Great idea,but what engine would they be specific to ? Just a pile of different parts for all sorts of engines. Quote Link to comment Share on other sites More sharing options...
426 pack Posted February 17, 2018 Share Posted February 17, 2018 17 minutes ago, Greg Myers said: Ladder Bars, gasser stuff, front end up in the air parts. 2 minutes ago, Greg Myers said: Just Carburetors, Carter AFB, Holley, Predator, Webers, Rochester 2bbls (for old school multi carb set ups), Strombergs (several for multi carb set ups too) I like these ones. Quote Link to comment Share on other sites More sharing options...
Greg Myers Posted February 17, 2018 Share Posted February 17, 2018 Old school air cleaners Quote Link to comment Share on other sites More sharing options...
Greg Myers Posted February 17, 2018 Share Posted February 17, 2018 To my thinking, a real No Brainer, put all of those Revell Motorcycles in one box. Quote Link to comment Share on other sites More sharing options...
Casey Posted February 17, 2018 Author Share Posted February 17, 2018 18 minutes ago, unclescott58 said: I'd like to see more of MPC kits come back that all accessories already in them. That's not really what's being asked in this topic. 2 minutes ago, Greg Myers said: Old school air cleaners You honestly think a Parts Pack consisting only of multiple types of vintage air cleaners would be a good seller? Round would have no problem moving 2,500 of these for $9.99 each? Quote Link to comment Share on other sites More sharing options...
Greg Myers Posted February 17, 2018 Share Posted February 17, 2018 Yes, who's carrying this hobby? It's us old geezers Doing nostalgia builds, searching our stash for that long lost part we need. Ok, add some newer stuff to the mix, maybe some K&N cone filters. Quote Link to comment Share on other sites More sharing options...
Fat Brian Posted February 17, 2018 Share Posted February 17, 2018 I like the day 2 tire and wheel idea with big and little wheels and period correct tires. Modern 4x4 wheels and tires would be great too. I'd like to see more engine packs with not commonly available engines, a slant 6, a 318 Poly, a Dodge long ram, a 351 Cleveland, an LS1, things like that. I'd also like wrecker stuff, good generic old or newer parts to build a custom bed off of. Quote Link to comment Share on other sites More sharing options...
Greg Myers Posted February 17, 2018 Share Posted February 17, 2018 You honestly think a Parts Pack consisting only of multiple types of vintage air cleaners would be a good seller? Round would have no problem moving 2,500 of these for $9.99 each? What did their aluminum velocity stacks go for? Quote Link to comment Share on other sites More sharing options...
D. Battista Posted February 17, 2018 Share Posted February 17, 2018 5 minutes ago, Greg Myers said: You honestly think a Parts Pack consisting only of multiple types of vintage air cleaners would be a good seller? Round would have no problem moving 2,500 of these for $9.99 each? What did their aluminum velocity stacks go for? I picked up a set at my LHS for $9.99 Quote Link to comment Share on other sites More sharing options...
Richard Bartrop Posted February 17, 2018 Share Posted February 17, 2018 The Chrysler 300C has a really nice early Hemi, so if they could some how make that into a separate kit. If they're willing to cut some new moulds, how about some more modern stuff? Some decent turbochargers and intercoolers, and maybe some modern engines. Pesonally, I'd like to see more traditional stuff. Big and little white wall tires, and vintage speed parts. How about an assortment of vintage hubcaps for doing period customs? Quote Link to comment Share on other sites More sharing options...
1972coronet Posted February 17, 2018 Share Posted February 17, 2018 ENGINES : The 454 from the Phase III B-M Camaro ; Mark IV / TH-400 from the 1968 El Camino and 1970 Monte Carlo SS-454 ; 335-Series engine / transmission from the Phantom / Vantom Econoline ; 340 from the 1971 Duster ( include the pulley / belt arrangement from the Street Machine version ) ; 440 / 727 from the 1971 Charger R/T ... UNDER-HOOD PARTS : Various radiators , A/C compressors , brake master cylinders / power boosters ,wiper motors , alternators , etc. , etc. These would come in handy as additions to older kits which lack those details ! AXLES & DIFFERENTIALS : 12 Bolt from the '70 Camaro ; Oldsmobile / Pontiac assembly from the 1962 Catalina ; 8 3/4 from the '71 Duster and '71 Charger ; Ford 9" from ____________ Quote Link to comment Share on other sites More sharing options...
426 pack Posted February 17, 2018 Share Posted February 17, 2018 I would buy everything mentioned above ^ Quote Link to comment Share on other sites More sharing options...
gtx6970 Posted February 17, 2018 Share Posted February 17, 2018 how about the 340 out of the AMT 1971 Duster I like the mopar 8-3/4 axle idea as well Quote Link to comment Share on other sites More sharing options...
Toner283 Posted February 17, 2018 Share Posted February 17, 2018 If they were to release the wheel horse tractor lets hope they tool up a mower deck for it. Maybe even a little yard trailer to go behind it. Quote Link to comment Share on other sites More sharing options...
Luc Janssens Posted February 17, 2018 Share Posted February 17, 2018 2 hours ago, Casey said: What do you think would make for a good selling, stand-alone Parts Pack from AMT? It should consist of newly created parts or a recreation of original parts which are long gone (like the forthcoming '57 Fantasy Parts Pack), but remember to keep it realistic-- it's got to be a small package and sell for $13-$15 or so. I propose: 1) 1/25 scale snowplow from (or similar to) the old MPC Jeep Commando, maybe add an amber rotating beacon style(?) roof light or two with transparent amber domes? 2) The Yard Tractor Parts Pack: Wheel Horse tractor found in the MPC Indy Turbine kit(s). If just one is included, the MSRP would/should be less: 3) Vintage Drag Strip Parts Pack: Mini bike from one of the MPC or AMT kits (maybe the forthcoming '86 El Camino?) and a few oil cans, two toolboxes, a floor jack, wheel chocks, or instead a starting line 'Christmas tree' like the one from the MPC '72 GTO, but all-new, with transparent bulbs/lenses in red, amber, and green? Maybe a decal sheet of vintage sponsor logos and vintage style class numbers and letters? 4) Vintage Service Truck Parts Pack: Two 55-gallon drums, push broom (both similar to those found in the AMT Ford C-600 Stakebed kit, but not necssisarily direct copies), a few oil cans, two toolboxes, a floor jack, wheel chocks, etc.-- things they could add to add extra value just about any pickup truck or van reissue. 5) Day 2 Wheel & Tire Parts Pack: One set of deep dish 5-slot wheels and some 60-series pad printed RWL BF Goodrich tires. Really, they could do multiple different sets of wheels using the same tires, and label it multiple ways. I think the newer pad printed Polyglas GT tires are great, and Round2 has certainly gotten a good return on that investment, but aftermarket wheels and tires for street vehicles, as a stand alone set, have been much overlooked, and Round2 has a ton of musclecar, pickup, and van kits in which they could include such a wheel and tire set as a bonus item. I realize this might be a tricky one, as they'd need to make sure the wheels and tires both fit and mount properly to whichever kit they are included with, but a few different wheel back pieces might be able to cover many of the variations. That's all I've got. Let's hear your suggestions/ideas, please. A good one Casey... Hmm GM 4x4 parts to turn some of the kitted Amt/Mpc GM pickups into all wheeldrive vehicles Ford 4x4 parts to turn some of the kitted Amt/Mpc FoMoCo pickups into all wheeldrive vehicles Mopar 4x4 parts to turn some of the kitted Amt/Mpc Mopar pickups into all wheeldrive vehicles a clear headlamp set, something like MV lenses offer's but better, with actual engraving on the clear, different sizes to fit most vintage Am/Mpc kits, round but also rectangular so kits like the Mpc Pinto Poney express, and the like, too can benefit from this Then adding to your proposals 1) add some decals as well 4) some real Jerry cans, the metal ones like used by the US army 5) 2 sets of wheel & tire set in one box, different themes, 60's aftermarket, 70s Street machine, and further to the Restomod combo.... Will post more if more pops into my mind... Quote Link to comment Share on other sites More sharing options...
1930fordpickup Posted February 17, 2018 Share Posted February 17, 2018 (edited) A nice set of wire wheels. A 351 Cleveland would be nice. Hop up parts from the 40's - the 70's would be nice. Not sure how to go about that break up though. Some Photo Etch parts like brackets for Alternator and power steering pump would be nice. How about some suspension parts like a straight axle, rear end parts for drag cars. Wheel tubs maybe. Edited February 17, 2018 by 1930fordpickup Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.