Brizio Posted October 4, 2023 Posted October 4, 2023 I just start another kit, open the box and prep some parts. I will open a tread soon. At work I finished a car but cannot post a picture about that, you have to wait when the movie came out.
Lownslow Posted October 8, 2023 Posted October 8, 2023 Developed a in house technique for centering my 3d scans
Slotto Posted October 8, 2023 Posted October 8, 2023 I've been working on these 2 on the down low. Just about finished the interior on the Ford. About to do some foiling on the Chevy
atomicholiday Posted October 9, 2023 Posted October 9, 2023 1 hour ago, Slotto said: I've been working on these 2 on the down low. Just about finished the interior on the Ford. About to do some foiling on the Chevy What's the car on the left? Looks pretty cool. Corvair?
Slotto Posted October 9, 2023 Posted October 9, 2023 Yeah, I had 2 so I cut the top off of the 2nd one
JJ Deuce Posted October 10, 2023 Posted October 10, 2023 finished up the go-kart from the '60 Chevy pickup kit. More pics in under glass - all the rest. 4
atomicholiday Posted October 10, 2023 Posted October 10, 2023 Just finished polishing this one. It’s molded in red, and bled through in a couple of areas, but I think I can live with it. Still needs some detail painting, but it’s getting really close now. Uh oh. I better find an excuse to shelve it pretty quick, or I’ll break my streak of not finishing builds.? Here’s a sneak peek mock up. 4
PatW Posted October 11, 2023 Posted October 11, 2023 8 hours ago, atomicholiday said: Just finished polishing this one. It’s molded in red, and bled through in a couple of areas, but I think I can live with it. Still needs some detail painting, but it’s getting really close now. Uh oh. I better find an excuse to shelve it pretty quick, or I’ll break my streak of not finishing builds.? Here’s a sneak peek mock up. Very nice indeed!
PatW Posted October 11, 2023 Posted October 11, 2023 Revell Trabby 601, work up to yesterday, had to go into Oxford for new Doc Martin shoes!
atomicholiday Posted October 11, 2023 Posted October 11, 2023 1 hour ago, PatW said: Revell Trabby 601, work up to yesterday, had to go into Oxford for new Doc Martin shoes! Looks like a really fun project! The weather is really turning fast here. So I’m trying to get at least one more paint job done before it’s too cold to shoot outside. I finished the color coats on this one today. I really need about two more weeks of good weather (doubtful) to get decals on and then shoot some clear coat. So it may or may not get cleared yet this year. Time will tell. 2
JollySipper Posted October 12, 2023 Posted October 12, 2023 1 hour ago, atomicholiday said: I finished the color coats on this one today. That's a Really nice bronze! Mind if I ask what paint it is?
atomicholiday Posted October 12, 2023 Posted October 12, 2023 32 minutes ago, JollySipper said: That's a Really nice bronze! Mind if I ask what paint it is? Hey thanks! It's Testors Extreme Lacquer Bronze straight from the can. Sprays a little weird. As I was shooting it, I swear I could see metal flakes bouncing off the body and into the air. But it came out fine. That's the second time I've seen something like that from extreme lacquer.
JollySipper Posted October 12, 2023 Posted October 12, 2023 1 hour ago, atomicholiday said: It's Testors Extreme Lacquer Bronze straight from the can. Well, it looks really good! and It's not necessary to clear over your decals, unless you just want to..... I don't believe they were cleared over from the factory.
atomicholiday Posted October 12, 2023 Posted October 12, 2023 7 hours ago, JollySipper said: Well, it looks really good! and It's not necessary to clear over your decals, unless you just want to..... I don't believe they were cleared over from the factory. That's a good point. Hmm... I might change the plan a bit.
tbill Posted October 12, 2023 Posted October 12, 2023 10 hours ago, atomicholiday said: Hey thanks! It's Testors Extreme Lacquer Bronze straight from the can. Sprays a little weird. As I was shooting it, I swear I could see metal flakes bouncing off the body and into the air. But it came out fine. That's the second time I've seen something like that from extreme lacquer. You weren’t seeing things, whenever I use that metallic paint, my booth is covered in flake…. sweet paint job by the way, color really looks good on that body. 1
atomicholiday Posted October 12, 2023 Posted October 12, 2023 15 minutes ago, tbill said: You weren’t seeing things, whenever I use that metallic paint, my booth is covered in flake…. sweet paint job by the way, color really looks good on that body. I think I’ve shot five or six different colors from that line. But the first time I really noticed this was a week or two ago using the inca gold.
OldNYJim Posted October 15, 2023 Posted October 15, 2023 On 10/13/2023 at 10:28 PM, Lownslow said: making the clear lenses for the Keiscalade Nice work using the 3d printed master as the buck for the vac forming. Smart idea!
Lownslow Posted October 15, 2023 Posted October 15, 2023 4 hours ago, CabDriver said: Nice work using the 3d printed master as the buck for the vac forming. Smart idea! been doing this for a while figured other people have been too, i used the 3d printed molds to make wheel barrels, flares, and windows 1
atomicholiday Posted October 15, 2023 Posted October 15, 2023 32 minutes ago, tbill said: More mack mock up I like that color combo a lot.? 1
atomicholiday Posted October 15, 2023 Posted October 15, 2023 Did a little detail painting on my Porsche project. Also cleaned up these scripts on my GTX. I am LOVING the foil under paint technique. I wish I had discovered that trick long ago. 3
gotnitro? Posted October 15, 2023 Posted October 15, 2023 4 hours ago, tbill said: More mack mock up Looks fantastic 1 1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now